Mark-10 Force and Torque MeasurementResources | Mark-10 Force and Torque Measurement
User Guide for MARK-10 models including: TT05 Series Digital Torque Testers, TT05 Series, Digital Torque Testers
Cap Torque Tester - Series TT05 - Mark-10
File Info : application/pdf, 2 Pages, 654.86KB
DocumentDocumentOTHER MARK-10 PRODUCTS A full line of force and torque measurement products and related items, including force gauges, torque gauges, force and torque test stands, sensors, grips, software, and more. Series TT05 DIGITAL TORQUE TESTERS Quick Start Guide Force and torque measurement engineered better Mark-10 Corporation 11 Dixon Avenue Copiague, NY 11726 888-MARK-TEN Tel: 631-842-9200 Fax: 631-842-9201 Internet: www.mark-10.com E-mail: info@mark-10.com 32-1233 121119 Series TT05 Digital Torque Testers Thank you! Thank you for purchasing a Mark-10 Series TT05 Torque Tester. We are confident that you will get many years of service from this product. Please read through this Quick Start Guide and the complete User's Guide before using the tester. IMPORTANT SAFETY CONSIDERATIONS Force and torque measuring instruments are sensitive and must be treated with care. Please review the safety information provided in the User's Guide prior to operating the gauge. LIST OF INCLUDED ITEMS: Qty. Part No. 1 MTT05-12 / MTT05-25 / MTT05-50 / MTT05-100 1 AC1030 / AC1031 / AC1032 / AC1035 1 08-1026 11 09-1165 Description Series TT05 digital torque tester AC adapter/charger w/US, EU, UK, or AUS prong Rechargeable NiMH battery (inside the instrument) Certificate of calibration USB cable Quick Start Guide POWER To power on the tester, press the button. Press and hold to power off. The tester may be powered either by the internal rechargeable battery or an AC adapter/ charger. The battery will last approximately 7 hours with the backlight turned on, and 24 hours with the backlight turned off before recharging is necessary LITERATURE & SOFTWARE DOWNLOADS Download at: www.mark-10.com/downloads 1. User's guides (PDF) Provided for all Mark-10 instruments. Locate the user's guide for this product and read it thoroughly before use. 2. USB driver For Mark-10 instruments and the model RSU100 RS-232 to USB converter. Required for communication with a PC. Follow the installation instructions provided in the user's guide. 3. MESUR® family of software see below. INSTALLING MESUR® SOFTWARE Mark-10 offers three data collection applications: MESUR® Lite Free basic data acquisition application, for data tabulation and exporting to Excel. Compatible with gauges only, not test stands. MESUR®gauge / MESUR®gauge Plus Data tabulation, graphing, analysis, and reporting, with user-configurable start and stop triggers and other tools. Compatible with gauges and test stands for load vs. time or load vs. travel. MESUR®gauge Plus adds test stand motion control coordination. Both applications can be evaluated for 90 days. PC requirements Compatible with PCs running Microsoft Windows 7 or later. Minimum monitor resolution is 1108 x 758. A USB or RS-232C serial port is required. If USB communication is required, install the Mark-10 USB driver. 2 3