Instruction Manual for MiBOXER models including: DP1S, DP2S, DP3S, Dali Touch Panel
1. Features. Adopt DALI standard protocol IEC62386. Powered by DALI bus, digital tube display, simple and quick function setting. It can control the ON/OFF, color, color temperature, saturation and...
1. The product shall be debugged and installed by professionals. 2. Before switching on the power, please ensure that all wiring is correct, so as not to cause damage to the device.
Subordinate New Brand DALI Touch Panel Model No.: DP1S / DP2S / DP3S 0329 1. Features Adopt DALI standard protocol IEC62386. Powered by DALI bus, digital tube display, simple and quick function setting. It can control the ON/OFF, color, color temperature, saturation and brightness of DALI lightings, and support scene saving and selection. 1. Support DALI standard protocol IEC62386-102, 207, 209. 2. Support DT8 type. Tc, xy coordinates, RGBWAF. 3. Support 4 control modes: scene, grouping, unicast and broadcast. 4. Support ON/OFF, color, color temperature, saturation, and brightness control. 5. Digital tube displays address, group, scene. Function setting is simple and quick. 6. Powered by DALI Bus. 7. Touch control, sensitive touch. 2. Parameters Model No. DP1S DP2S Power Supply DALI Power DALI Power DALI Bus Standard IEC62386 IEC62386 Output Signal DALI Signal DALI Signal DP3S DALI Power IEC62386 DALI Signal 3(#%5UZQFYZDPPSEJOBUFT Controlling Type %JNNJOH %5 $$5%5UZQF5D 3(#8%5UZQF3(#8"' 3(# $$5%5UZQF3(#8"' Standby Current Working Temp. Weight <4mA@16V -10~40°C 145g <4mA@16V -10~40°C 145g <4mA@16V -10~40°C 145g 48mm 86mm M DA1 DA2 DA1 DA2 48mm 86mm 24mm 9mm DALI Dimming Touch Panel (DT6) Model No.: DP1S Dimming slider All ON All OFF Scenes Zone ON Zone OFF DALI Color Temp. Touch Panel (DT8) Model No.: DP2S CCT slider Dimming slider All ON All OFF Scenes Zone ON Zone OFF DALI 3 in 1 Touch Panel (DT8) Model No.: DP3S Color Slider CCT Slider/ Saturation White Light All ON All OFF Dimming slider Scenes Zone ON Zone OFF 3. Button function instruction Change lamp colors. Adjust color temperature. Under white light mode, adjust color temperature. Under color light mode, change lamp colors. Adjust brightness(1%~100%). Short press to get white light mode. Short press A or B or C or D to select scene. Long press A or B or C or D button to save the current light status to Ccorresponding scene (see more on instruction 5). Master ON: Short press to turn on all the lights under groups 1-4 on this panel. Long press for 5 seconds to turn on the button sound. Zone on (1-4): Short press to turn on all the lights in the group. Master OFF: Short press to turn off all the lights under groups 1-4 on the panel. Long press for 5 seconds to turn off the button sound. Zone OFF (1-4): Short press to turn off all lights in the group. Indicator light: The group indicator light is always on, indicating that the group has been selected; The indicators of the 4 groups are all on, indicating that all 4 groups are selected. 4. Function setting instruction 4.1 Digital dube display state instruction Self-locking: If there is no operation for 5s, it will enter the locked state, and the digital tube will not display. Unlocking: Long press the M button for 2s until the digital tube is highlighted, and the unlock is successful. 4.2 Control mode setting (Only DP3S have this function) Under unlocked status, short press M button; until the digital tube display DP3-DP5, press · button or button to switch (RGB, RGBW, RGBCCT) 3 different control mode. RGB dimming control modeDT8 typex-y RGBW dimming control modeDT8 typeRGBWAF RGBCCT dimming control modeDT8 typeRGBWAF 4.3 DALI unicast address, group address and broadcast address settings Under unlocked status, short press M button Until display ( Any of the following ) Unicast address, For example Group address, For Broadcast address, For example Long press the M button to select Unicast address or Group address or Broadcast address. Unicast address: When display (000-063): DALI panel is in unicast address mode. Short press · or to set the start unicast address of DALI panel, long press can quickly adjust. For example: Panel set unicast address Unicast addresses corresponding to the 4 groups Zone-1 Zone-2 Zone-3 Zone-4 001 003 004 062 063 000 001 Group address: When display (C00-C15): DALI panel is in group address mode. Short press the · or to set the starting group address of the DALI panel, long press can quickly adjust. For example: Panel set group address Group addresses corresponding to the 4 groups Zone-1 Zone-2 Zone-3 Zone-4 01 03 04 14 15 00 01 5. Scene setting Under the unlocked state, short press the M button until the digital tube displays (E00-E15). Short press · or to set the initial scene value of the DALI panel, long press for quick adjustment. For example: Setting to Relative scene for (A B C D) button DP1S DP2S DP3S A : Scenes 01 A : Scenes 01 A : Scenes 01 B : Scenes 02 B : Scenes 02 B : Scenes 02 C : Scenes 03 C : Scenes 03 C : Scenes 03 D : Scenes 04 D : Scenes 04 A : Scenes 14 B : Scenes 15 C : Scenes 00 D : Scenes 01 A : Scenes 14 B : Scenes 15 C : Scenes 00 D : Scenes 01 A : Scenes 14 B : Scenes 15 C : Scenes 00 6. Connection Diagram DALI bus power supply Model No.: DL-POW1 Input: AC100~240V DALI touch panel L N Input: AC100~240V DALI Bus Power Supply Model No.: DL-POW1 Output Voltage: DC16V Output Current: Max 250mA Output Power: 4W Working Temperature: -20~60°C Made in China DALI 2 DALI 1 Indicator Light M DA1 DA2 DA1 DA2 7. Installation / Dismantlement Install the bottom case into the wall; Above are the standard bottom cases. Fix the base on the bottom case with screw. DALI Lamps DALI 5 in 1 LED Controller ( DT8 ) Model No.: DL-X Clip glass panel to the base. Dismantle Insert screwdriver into the bayonet of the panel, pry it out to dismantle it. 8. Attention 1. The product shall be debugged and installed by professionals. 2. Before switching on the power, please ensure that all wiring is correct, so as not to cause damage to the device. 3. If there is faults, non-professional please do not repair without permission, otherwise the device may be damaged. Made in ChinaAdobe PDF library 15.00 Adobe Illustrator CC 23.0 (Windows)