Westinghouse PWTN Turbo Nozzle

⚠ WARNING

Users must read and understand the operator's manual for their pressure washer before using this accessory to reduce the risk of injury. Before beginning any cleaning activity, spray the pressure stream in a safe direction to ensure all accessories are connected properly to minimize the danger of injury or property damage. Fits most pressure washers. Before using this attachment, ensure it is compatible and correctly installed. Risk of fluid injections. Do not point at people, pets, electrical devices, or the unit itself. Wear eye protection designated to conform with ANSI Z87.1. Before adding, replacing, or modifying accessories, turn off the pressure washer, release water pressure in the trigger handle, and lock the trigger handle's lock out (if provided with your pressure washer). Use only with cold water and only outdoors. Store the accessory indoors. Save these guidelines. Use them to train other users and refer to them frequently. Give these instructions to the tool's user as well.

Product Specifications

Connection

1/4 in. Quick Connect Plug Inlet

Maximum Pressure

Up to 3600 psi

Maximum Water Flow

4 GPM

Maximum Water Temperature

140°F

Applications

• Cleaning concrete driveways, sidewalks, and foundations

Installing the Turbo Nozzle

This attachment installs on the end of the spray lance, similar to any nozzle as described in your pressure washer's operator's manual.

• If necessary, remove the existing nozzle from the end of the lance.
• Pull back the quick-connect collar and insert the turbo nozzle.

NOTE: Be sure the turbo nozzle is locked securely into the lance.