Govee H6114 RGB Car LED Strip Lights User Manual

Product Overview

This document provides instructions for the Govee H6114 RGB Car LED Strip Lights.

Initial Product Details:

• Folded Size: 75x105 mm
• Unfolded Size: 150x105 mm
• Material: 80G paper
• Process: Single-color printing
• Folding Method: Saddle stitch

Specifications

Installing Your Strip Lights

1. Preparation Before Installing

• Unpack the box and check all items listed in the packing list.
• Power on the strip lights and check whether they light up.

2. Installing Steps

1. Wipe the installing surface to make sure it's clean and smooth.
2. Install the cigarette lighter and control box in the central console.
3. Peel off the protective film and stick the strip lights as indicated in the picture.

d. Firmly press the strip from end to end and reinforce ends of the strip with zip ties and screws.

e. Insert the cigarette lighter into the socket and press the button on it. The button will light on, indicating the strip light is powered on.

Controlling with the Control Box

Downloading and Connecting the Govee Home App

Download the Govee Home app from the App Store (iOS devices) or Google Play (Android devices).

Requirements: A smartphone running iOS 9.3 (or above) or Android 4.4 (or above).

Connecting the Strip Lights to the App

1. Turn on Bluetooth ? on your mobile phone.
2. Open Govee Home app and tap the "+" icon in the top right corner.
3. Select "H6114" in the device list.

Customer Service

• ?️ Warranty: 12-Month Limited Warranty
• ?️ Support: Lifetime Technical Support
• ✉️ Email: support@govee.com
• ? Official Website: www.govee.com

Follow us on social media:

@Govee (Facebook) | @Govee (YouTube) | @Govee (Twitter) | @Goveeofficial (Instagram)

Compliance Information

EU Compliance Statement

Shenzhen Qianyan Technology LTD declares that this device complies with the essential requirements and other relevant provisions of Directive 2014/53/EU.

EU contact address: SUNRISE MOMENTS LIMITED, 1st Floor Newmarket House, Newmarket Square, The Coombe, Dublin 8, DUBLIN, Ireland, D08VAP9.

UK Compliance Statement

Shenzhen Qianyan Technology LTD declares that this device complies with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017.

Technical Specifications

• Bluetooth®
• Operation Frequency (For Europe & UK only): 2402-2480MHz
• Output Power (For Europe & UK only): <10dBm (E.I.R.P.)

Safety Information and Disposal

Usage Restrictions

This product is for ambiance lighting only, not for primary illumination.

This device uses a non-replaceable light source. When the light source reaches the end of its life cycle, the device should be replaced.

The light source or separate control gear is not intended for use in other applications.

• Do not connect the rope light to the supply while it is in the packing or wound onto a reel.
• Do not use the rope light when covered or recessed into a surface.
• Do not open or cut the rope light.
• To reduce the risk of strangulation, the flexible wiring connected to this luminaire shall be effectively fixed to the wall if the wiring is within arm's reach.

This product contains a light source of energy efficiency class G.

Battery Warnings

CAUTION: Risk of explosion if the battery is replaced by an incorrect type.

WARNING: Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire, or the like. Extremely low air pressure may result in an explosion or leakage of flammable liquid or gas. Discharged batteries may cause fire or smoke; tape the terminals to insulate them.

Environmental Disposal

♻️ Old electrical appliances must not be disposed of together with residual waste but must be disposed of separately. Disposal at communal collection points is free for private individuals. The owner of old appliances is responsible for bringing them to these points or similar collection points. This contributes to recycling valuable raw materials and treating toxic substances.