Husqvarna ST 224 P Snow Thrower - Repair Parts

Model Number: ST 224 P

Product Number: 961 93 01-22

MFG. ID. NUMBER: 96193012203

Auger Housing / Impeller Assembly

Diagram illustrating the Auger Housing and Impeller Assembly components, including the main housing, discharge chute base, impeller, gearbox, bearings, and various fasteners like bolts and nuts.

Key No.	Part No.	Description
1	585 05 69-01	CHUTE DISCAHRGE BASE
2	532 18 40-95	BRACKET CORNER DISCHARGE YZP
3	873 80 04-00	NUT NYLOCK 1/4 - 20
4	585 69 12-01	BOLT CAR WAF BLK 5/16-18 X .488
5	585 69 13-01	NUT HEX FLANGE 5/16-18 NYLOCK
6	532 19 87-91	BEARING 1501389 BALL
7	582 86 76-01	TRANSMISSION GEARBOX ALUM DD
8	588 07 75-01	BOLT 1/4-20 X 1-13/16 SHEAR
9	586 60 72-02	IMPELLER STEEL SNOW 479

Auger Housing / Impeller Assembly Components

Diagram showing parts related to the Auger Housing, including the housing itself, scraper bar, carriage bolts, and nuts.

Key No.	Part No.	Description
1	581 70 83-90	AUGER HOUSING
2	532 40 78-25	SCRAPER BAR
3	872 27 05-05	CARRIAGE BOLT 5/16-18 X .625 GR5
4	532 15 53-77	NUT 5/16-18

Auger Weld Ribs

Diagram illustrating the left and right-hand auger weld ribs.

Key No.	Part No.	Description
1	587 19 10-01	AUGER WELD RIB LH 24
2	585 54 42-01	AUGER WELD RIB RH 24

Auger Housing / Impeller Assembly Tools

Diagram showing tools and clips associated with the Auger Housing/Impeller Assembly, such as a cleanout tool and clip.

Key No.	Part No.	Description
1	532 19 21-99	TOOL CLEANOUT
2	532 40 54-00	CLIP CLEANOUT TOOL
3	532 19 41-89	SCREW HEX WASHER 13-16 X 5/8

Auger Housing / Impeller Assembly Fasteners

Diagram showing various fasteners and retainers used in the Auger Housing/Impeller Assembly, including plastic retainers, bearings, and bolts.

Key No.	Part No.	Description
1	532 18 81-70	PLASTIC RETAINER
2	532 42 77-62	AUGER BALL BEARING
3	584 29 94-01	SCREW HI-LO 5/16-14 X 1.00 - BLK
4	874 78 04-26	BOLT SHEAR HEX HD 1/4-20
5	873 80 04-00	NUT 1/4-20

Auger Housing / Impeller Assembly Components

Diagram showing skid shoes, bolts, and nuts for the Auger Housing/Impeller Assembly.

Key No.	Part No.	Description
1	583 83 88-01	SKID SHOW UHMW
2	585 80 29-01	BOLT CARR BLK 5/16-18 X 1.25
3	585 80 28-01	NUT HEX 5/16-18 LRG FLG

Auger Housing / Impeller Assembly Brackets and Bolts

Diagram illustrating support brackets and bolts for the Auger Housing/Impeller Assembly.

Key No.	Part No.	Description
1	589 32 30-02	SUPPORT GEARBOX LS
2	585 69 13-01	NUT HEX FLG NYLOCK BLK 5/16-18
3	585 83 20-01	BOLT CARRIAGE BLK 5/16-18 X 5/8 BLK
4	872 11 05-10	BOLT CARRIAGE 5/16-18 X 1-1/4

Control Panel / Discharge Chute Components

Diagram showing components of the Control Panel and Discharge Chute, including the console base, switch grip, screws, and console cover.

Key No.	Part No.	Description
1	581 13 12-04	CONSOLE BASE MULTICONT GRAY-MS498
2	585 80 50-01	SWITCH GRIP HEATED BLACK
3	817 06 04-10	SCREW TA SEMI GIMLE 1/4-20 X .62
4	581 32 95-01	SCREW HEX WASHER HI-LO 13-16 X 1.50

Control Panel / Discharge Chute Components

Diagram illustrating the Husqvarna console cover assembly, panel clips, and LED lights.

Key No.	Part No.	Description
1	581 12 79-01	HUSQVARNA CONSOLE COVER ASM
2	532 19 41-89	SCREW HI-LO 13-16 X 5/8
3	581 92 87-01	CLIP PANEL
4	586 72 35-01	LIGHT ASM LED HUSQ RH
5	586 72 36-01	LIGHT ASM LED HUSQ LH
6	585 86 83-01	WIRE HARNESS LIGHT JUMPER

Control Panel / Discharge Chute Cables and Levers

Diagram showing power steering cables, control levers, and associated screws and pins for the Control Panel/Discharge Chute.

Key No.	Part No.	Description
1	588 26 39-01	CABLE, POWER STEER - LHS
2	588 26 39-02	CABLE, POWER STEER - RHS
3	587 46 30-01	LEVER, CONTROL
4	587 73 97-01	LEVER, CABLE ARM - LHS
5	587 73 97-02	LEVER, CABLE ARM - RHS
6	581 32 95-01	SCREW HI-LO 13-16 X 1.50
7	817 06 04-10	SCREW 1/4-20 X .625
8	817 41 13-08	SCREW HI-LW 13-16 X .500
9	588 14 77-01	PIN, GROOVED
10	812 00 00-14	E-RING

Control Panel / Discharge Chute Controls and Braces

Diagram illustrating control levers, springs, nuts, and support braces for the Control Panel/Discharge Chute.

Key No.	Part No.	Description
1	581 12 39-02	LEVER CONTROL SPEED/DEFL
2	581 24 16-02	LEVER CONTROL CHUTE ROT
3	581 32 97-01	BOLT SHOULDER 1/4-20
4	581 32 96-01	SPRING COMPRESSION
5	586 66 89-01	NUT FL LOCK 1/4-20
6	584 46 84-02	BRACE SUPPORT SPEED
7	587 03 13-01	WASHER .625 X .375 X .094 NYLON 6/6

Control Panel / Discharge Chute Grips and Screws

Diagram showing heated grips and screws for the Control Panel/Discharge Chute.

Key No.	Part No.	Description
1	590 49 36-01	GRIP, HEATED, DSST SHO
2	532 44 22-50	SCREW PAN HD TORX 1/4-20 X .75

Control Panel / Discharge Chute Components

Diagram showing the chute weldment assembly, deflector seal, pop rivets, and chute shield.

Key No.	Part No.	Description
1	588 07 78-02	CHUTE WELDMENT ASSEMBLY (INCLUDES 1-6)
2	590 58 70-01	CONTROL CHUTE
3	581 32 94-01	DEFLECTOR BOWDEN
4	585 80 83-01	PIN CLEVIS 5/16 X .875
5	532 42 33-03	PIN CLEVIS 1/4 X .312
6	532 18 45-05	HAIRPIN RETAINER
7	501 41 73-01	DEFLECTOR SPRING
8	585 69 14-01	CARRIAGE BOLT 1/4-20 X .544
9	585 83 20-01	NUT 1/4-20
10	873 97 05-00	CARRIAGE BOLT 3/8-16 X .625
11	501 41 74-01	NUT 5/16-18
12	588 07 76-03	WASHER .362 X .625 X .205 NYLON

Control Panel / Discharge Chute Cables

Diagram showing interlock cables, grooved pins, E-rings, and return springs for the Control Panel/Discharge Chute.

Key No.	Part No.	Description
1	593 85 34-01	CABLE INTERLOCK
2	532 43 17-62	PIN GROOVED
3	812 00 00-14	E-RING
4	581 15 12-01	SPRING RETURN
5	532 19 79-91	CLIP CABLE BLACK

Control Panel / Discharge Chute Harness and Retainer

Diagram showing the wire harness for lights and grips, and a wire retainer.

Key No.	Part No.	Description
1	587 53 57-01	HARNESS WIRE LIGHTS & GRIPS
2	532 14 50-06	WIRE RETAINER

Control Panel / Discharge Chute Cables

Diagram illustrating drive, auger, and speed control cables, along with clips, fasteners, pins, and hairpins.

Key No.	Part No.	Description
1	582 51 90-02	CABLE CONTROL DRIVE
2	588 11 38-02	CABLE CONTROL AUGER
3	588 12 23-01	CABLE CONTROL SPEED
4	532 19 79-91	CLIP CABLE
5	532 42 81-24	FASTENER PUSH .250
6	581 32 94-01	PIN CLEVIS 5/16
7	532 42 33-03	HAIRPIN
8	585 80 83-01	PIN CLEVIS 1/4

Control Panel / Discharge Chute Rotator Assembly

Diagram showing the cable rotator assembly, clevis pins, hairpin, conduit clip, washer, and lower auger guide.

Key No.	Part No.	Description
1	581 68 03-01	CABLE ROTATOR ASM
2	581 32 94-01	PIN CLEVIS 5/16 X 7/8
3	877 10 08-12	PIN CLEVIS 1/4 X 3/4
4	532 42 33-03	HAIRPIN SOFT ZINC
5	584 65 22-01	CLIP CONDUIT DOUBLE
6	586 68 21-01	WASHER
7	587 13 08-01	PIN CLEVIS 5/16 X 1

Handles

Diagram illustrating the upper handle assembly, including handle knobs and screws.

Key No.	Part No.	Description
1	588 16 08-03	UPPER HANDLE
2	532 19 19-38	HANDLE KNOB STD BLACK
3	588 05 99-01	SCREW 5/16-18 X 2.25 CONCAVE HEAD WITH PATCH

Handles

Diagram showing the lower handle assembly, including screws, chute rotator support, and bolts.

Key No.	Part No.	Description
1	588 67 21-03	LOWER HANDLE
2	817 00 06-12	SCREW HEX WASH HD 3/8-16 X .75
3	589 26 45-04	CHUTE ROTATOR SUPPORT ASM
4	817 00 05-10	BOLT HEX 5/16-18

Drive Components

Diagram illustrating drive components such as shafts, bushings, gears, retaining rings, and springs.

Key No.	Part No.	Description
1	532 44 49-49	WASHER 1.00
2	587 97 89-01	BUSHING HEX 1 SHAFT
3	588 51 86-01	GEAR 59T DRIVEN
4	812 00 00-53	RETAINING RING
5	580 75 26-01	AXLE SHAFT SPLIT
6	532 12 47-88	RETAINER SPRING 1 ZINC
7	532 17 12-71	RIVET RD HD DRILLED 1/4 DIA
8	580 75 25-01	AXLE SLEEVE

Drive Components Diagram

Detailed diagram of drive components including pulleys, discs, springs, gears, and various fasteners.

Key No.	Part No.	Description
1	521 99 11-01	NUT HEX FLANGE LK 1/2-13
2	587 70 34-02	SWING PLATE FRICTION PULL
3	581 12 30-01	ROD TIP PLATE
4	581 73 27-01	SPACER DRIVE
5	532 19 38-85	LATCH SPRING
6	812 00 00-07	E-RING RETAINER
7	581 32 84-01	FRICTION DISC COMBO PULLEY
8	587 19 34-03	BRACKET YOKE ASSEMBLY
9	581 31 53-01	SPRING TORSION DRIVE
10	585 26 38-01	EXTENSION SPRING
11	585 69 15-01	NUT HEX FLANGE LOCK 5/16-18
12	580 75 62-01	BEARING 9/16 I.D. 1622-2RSNR
13	580 75 61-02	RETAINING RING 1622-2RSNR
14	580 75 13-01	WASHER FLAT .59 I.D. X 1.065 X 25 GA
15	580 75 66-01	PAWL ASM RH
16	580 75 60-01	GEAR ASM PLANETARY
17	580 75 63-01	WASHER FLAT .6875 I.D. X 1.00 X 21 GA
18	532 17 53-44	TRUNNION BEARING ASM
19	581 09 09-01	HUB RUBBER WHEEL
20	872 11 05-06	BOLT CARRIAGE 5/16-18 X .75
21	581 09 10-02	PLATE RUBBER WHEEL
22	581 09 11-01	RING RUBBER WHEEL
23	586 64 43-01	E-RING
24	580 75 51-01	ROD PAWL
25	812 00 00-22	E-RING
26	580 75 24-01	SHAFT REDUCTION PWR STR
27	532 75 11-53	NUT HEX FLANGE LK 5/16-18
28	580 75 67-01	PAWL ASM LH

Chassis / Engine / Pulleys Components

Diagram showing the LCT engine, frame, engine bolts, frame cover, shifter bracket, screws, and wireform support cable.

Key No.	Part No.	Description
1	590 21 86-03	COMPLETE LCT ENGINE PW2HK18650178E
2	589 26 47-05	FRAME
3	532 15 04-06	ENGINE BOLT 3/8-16 X 1.280 DOGPOINT
4	580 83 95-05	FRAME COVER
5	501 06 04-03	SHIFTER BRACKET
6	582 90 69-01	SCREW HEX WASHER 1/4-20 X .625
7	588 95 45-01	WIREFORM SUPPORT CABLE
8	532 42 88-67	BOLT HEXHD WASHER 5/16-18 X .750
9	585 21 75-01	BOLT HEXHD WASHER 5/16-18 X 1.000

Chassis / Engine / Pulleys Mounting Plate

Diagram showing a small mounting plate.

Key No.	Part No.	Description
1	583 94 05-02	SMALL MOUNTING PLATE

Chassis / Engine / Pulleys Components

Diagram illustrating various components related to the chassis, engine, and pulleys, including brake arm bushing, spring return idlers, belt drive, belt keeper bracket, and engine pulley bolt.

Key No.	Part No.	Description
1	587 34 37-01	BUSHING BRAKE ARM
2	587 03 12-01	SPRING RETURN IDLER ARM
3	580 75 30-01	SPRING RETURN IDLER ARM
4	581 41 38-01	BOLT SHOULDER 5/16-24 X 2.15
5	584 21 61-02	BELT DRIVE 4L X 38.19
6	588 49 28-02	BRACKET BELT KEEPER 007
7	501 81 82-01	BELT IMPLELLER LOW CRANK
8	580 83 11-06	ARM IDLER AUTO PH .676
9	582 38 84-01	BOLT ENGINE PULLEY
10	874 61 05-12	CAPSCREW HEXHD 5/16-24 X .75 GR5
11	874 76 05-14	BOLT HEXHD 5/16-18 X .875
12	810 04 05-00	LOCKWASHER 5/16 SPLIT HVY
13	819 11 12-16	WASHER 11/32 X 3/4 X 16GA
14	874 76 05-28	BOLT HXHD 5/16-18 X 1.75
15	581 14 14-01	PULLEY IDLER 2.0 WITH SPACER
16	586 88 02-01	PULLEY IDLER 2.0 O/ SPACER
17	587 89 37-03	PULLEY ASM IMPELLER / DRIVE
18	583 81 49-01	SCREW FLANGE HEAD 3/8-16
19	532 42 79-42	NUT NYLOK FLANGE 5/16-18
20	585 51 78-01	SCREW 1/4-20 X .65 W/DOG POINT
21	590 04 46-02	BRACKET NUT BZP
22	590 69 92-01	PULLEY IMPELLER DD 4L
23	587 58 72-02	GUIDE LOWER AUGER BELT 479
24	532 16 31-83	BOLT HXHD 5/16-18 X 5/8
25	581 59 25-02	BRACKET AUG HOUSING INTER 479
26	581 63 20-02	BRACKET BELT KEEPER LOWER 479
27	581 33 82-03	ARM IDLER DRIVE

Chassis / Engine / Pulleys Belt Cover

Diagram showing the belt cover assembly, including bolts and cable guide.

Key No.	Part No.	Description
1	587 10 54-01	BELT COVER BLACK ASSEMBLY (INCLUDES 2 & 4)
2	532 14 50-06	BOLT HEX WSH THDRL 1/4-20 X 1
3	532 14 50-06	CABLE GUIDE
4	532 14 50-06	PALNUT 1/4 IN

Wheels

Diagram illustrating the left and right wheels for the snow thrower.

Key No.	Part No.	Description
1	586 71 04-01	WHEEL 15X5.00 NPS LH 1.00 K478
2	586 71 03-01	WHEEL 15X5.00 NPS RH 1.00 K478

Bag of Parts

Diagram showing various parts included in a replacement parts bag, such as bolts, nuts, wrenches, knobs, springs, and support cables.

Key No.	Part No.	Description
1	588 07 75-01	BOLT 1/4-20 X 1.81
2	873 80 04-00	NUT NYLOCK 1/4-20
3	532 42 91-12	WRENCH
4	501 41 73-01	BOLT SHOULDER
5	585 69 14-01	NUT HEX FL 1/4-20 CTR
6	585 69 10-01	NUT NYLOCK 3/8-16
7	588 05 99-01	BOLT 5/16-18 X 2.25 CONCAVE
8	532 19 19-38	KNOB 5/16-18 TWO-WING
9	585 83 20-01	BOLT 5/16-18 X .625
10	873 97 05-00	NUT SERR FL LOCK 5/16-18
11	532 18 45-05	SPRING DEFLECT CHUTE
12	581 69 75-01	KNOB SOFT TOUCH SLOTTED
13	581 89 73-01	SUPPORT ROTATION CABLE
14	501 41 74-01	WASHER NYLON
NI	588 07 76-03	KIT REPLACEMENT BAG OF PARTS

Bag of Parts - Safety Ignition Key Kit

Diagram showing the safety ignition key kit.

Key No.	Part No.	Description
1	532 44 30-59	SAFETY IGNITION KEY KIT

Decals

Diagram showing various warning and informational decals, including auger, chute, auger safety, and belt guide decals.

Key No.	Part No.	Description
1	532 18 40-45	DECAL AUGER
2	590 81 22-01	DECAL CHUTE
3	532 19 96-83	DECAL AUGER SAFETY
4	532 18 40-28	DECAL BELT GUIDE

Decals and Manual Reference

Diagram showing danger decals and references to the operator's manual in multiple languages. Also lists other decals not shown.

Key No.	Part No.	Description
1	532 19 96-83	DECAL, DANGER
3	590 81 22-01	DECAL, DANGER, DEFLECTOR
4	532 18 40-45	DECAL, DANGER
6	532 18 40-28	DECAL
-	115 99 57-49	OPERATOR'S MANUAL, ENGLISH, FRENCH, SPANISH
-	532 42 86-77	CROWN "H" (NOT SHOWN)
-	590 69 72-01	DECAL, ENG. RECOIL (NOT SHOWN)
-	532 17 45-72	DECAL, CANADA IGNITION (NOT SHOWN)
-	588 62 63-01	DECAL, AUGER HSQ (NOT SHOWN)

Engine, LCT - Complete Engine Components

Diagram showing components of the LCT engine, including cylinder head, push rod, valve cover, piston, camshaft, flywheel, cooling fan, crankshaft, muffler, and fuel tank.

Key No.	Part No.	Description
1	532 42 05-78	CYLINDER HEAD ASSEMBLY (INCL. GASKET)
2	532 42 05-79	PUSH ROD & PLATE KIT (W/ VALVE COVER GSKT)
3	532 42 05-80	VALVE COVER (INCL. GASKET)
5	532 42 05-82	PISTON & ROD ASSEMBLY
7	532 42 05-84	CAMSHAFT - MCR
8	595 01 24-01	FLYWHEEL - ELECTRIC START W/ 6 MAGNETS
9	532 42 05-86	COOLING FAN - FLYWHEEL
10	532 44 66-42	CRANKSHAFT
13	587 73 78-01	MUFFLER ASSEMBLY
14	532 43 65-64	FUEL TANK (2.7L BLACK W/ PLASTIC CAP)
15	532 42 92-34	FUEL TANK ON/OFF VALVE (PETCOCK)
16	532 42 49-42	FUEL TANK CAP - BLACK CLICK STYLE (VENTED)
17	587 14 79-01	CARBURETOR (W/IDLE SPEED CONTROL - W/GSKTS)
18	532 44 39-34	IGNITION COIL (CDI)
20	532 42 49-39	SPARK PLUG
22	585 77 24-01	SHIELD - FLYWHEEL
23	532 43 21-44	FUEL HOSE KIT
24	532 42 92-59	SPEED CONTROL BRACKET (FIXED)
25	532 42 96-46	GOVERNOR GEAR ASSEMBLY
26	581 76 87-01	GOVERNOR ARM & LINK KIT
27	532 42 06-02	GOVERNOR ARM PADDLE
28	532 43 69-67	RECOIL STARTER ASSY (ROUND-BLACK)
29	532 43 69-68	STARTER CUP (USE WITH ROUND STYLE STARTER)

Engine, LCT - Additional Components

Diagram showing additional engine components such as blower housing, crankcase cover, oil seals, spark plug boot, starter, gasket kit, oil dipstick, rocker arm kit, choke control, breather tube, and wire harness.

Key No.	Part No.	Description
30	581 19 20-01	BLOWER HOUSING - BLACK ELECTRIC START
31	581 00 73-01	CRANKCASE COVER ASSY (PRESS-IN TYPE HOFT) (INCL. GASKET)
32	532 42 95-99	OIL SEAL KIT (2 PCS)
34	532 43 69-66	SPARK PLUG BOOT
35	532 43 64-66	120V ELECTRIC STARTER (SIDE MOUNT)
36	532 42 96-01	ENGINE GASKET KIT
37	532 42 09-61	SMALL BLACK OIL DIPSTICK (PLASTIC)
38	532 42 96-91	ROCKER ARM KIT (INCL. GASKET)
39	532 42 92-24	CHOKE CONTROL KNOB (GEN II RED)
40	532 42 95-98	NON-REMOVABLE PLASTIC PLUG
43	580 35 34-01	BREATHER TUBE
47	581 00 72-01	HIGH OIL-FILL TUBE/DIPSTICK (PRESS-IN TYPE)
48	595 01 25-01	WIRE HARNESS (W/O ON/OFF SWITCH)
49	532 43 54-95	OIL DRAIN PLUG W/WASHER
50	595 01 26-01	HEATER BOX (W/O ON/OFF SWITCH)
51	532 43 71-19	SHIELD - CYLINDER
52	532 42 49-49	PRIMER BULB WITH HOSE
53	532 42 49-54	SAFETY KEY SWITCH -SNOW (INCL. KEYS)
54	532 44 30-59	KEY SET - RED (2) (SNOW)
55	532 43 26-86	OIL DRAIN TUBE-SNOW
56	595 01 27-01	GOV AND CARB SHIELD - COMPOSITE (ALSO REPLS 56, 79, 80)
59	532 43 65-62	FUEL TANK SKIRT
60	532 44 38-93	60 WATT AC CHARGING COIL
61	532 43 27-52	FUEL CONTROL KNOB (RED)
65	581 37 28-01	TAPPET KIT (SET OF 2)
69	532 42 49-51	CARBURETOR STUDS & COUPLING KIT-SNOW
70	580 35 36-02	CARBURETOR REPAIR KIT
72	587 15 22-01	LABEL KIT
74	587 82 11-01	MUFFLER HEAT SHIELD COVER
77	532 43 26-88	RECOIL BOLT KIT (3 BOLTS PER KIT)
78	581 45 93-01	BREATHER TUBE BRACKET
79	SEE REF 58 N/A PART OF REF 58, ALL ONE PART
80	SEE REF 58 N/A PART OF REF 58, ALL ONE PART
81	585 29 72-01	WOODRUFF FLYWHEEL KEYS (5-PACK)
82	585 02 05-03	CARBURETOR SPACER KIT
85	586 32 56-01	FUEL TANK STRAINER
86	586 32 73-02	CYLINDER HEAD BOLT KIT (4)
87	586 32 69-01	CC COVER BOLT KIT (6)
88	586 32 68-01	MUFFLER MTG STUD KIT (2)
91	587 52 57-01	CRANKSHAFT GASKET KIT
97	589 75 26-01	MUFFLER MANIFOLD SHIELD
9999	586 32 62-01	HIGH ALTITUDE JET (>6,000 FEET)
9999	579 80 64-01	BOLT KIT - BLOWER HSG- HEATER BOX-TANK SKIRT
9999	590 92 08-01	STARTER SWITCH BOX SCREWS

	Husqvarna RZ4222F Parts Manual Detailed parts manual for the Husqvarna RZ4222F zero-turn mower, including diagrams and part numbers for all components.
	Husqvarna LGT2554 Tractor Illustrated Parts List and Warranty Information Comprehensive illustrated parts list for the Husqvarna LGT2554 tractor, including detailed diagrams and part numbers for various components such as the engine, chassis, mower deck, and steering assembly. Also includes limited warranty information for Husqvarna consumer wheeled products.
	Husqvarna ST 224 P Operator's Manual Comprehensive operator's manual for the Husqvarna ST 224 P snow thrower, covering safety instructions, assembly, operation, maintenance, and troubleshooting.
	Husqvarna Snow Blade T-30359: Instruction Manual and Parts List Comprehensive guide for the Husqvarna Snow Blade T-30359, including assembly instructions, parts list, and safety information. Covers operation and maintenance for compatible Husqvarna tractor models.
	Husqvarna LE 389 Edger/Trimmer Spare Parts List and Diagrams Comprehensive spare parts list and assembly diagrams for the Husqvarna LE 389 edger/trimmer. Find part numbers, descriptions, and assembly details for engine, blade, handle, wheels, and more.
	Husqvarna ST 424, ST 427, ST 430 Series Snow Thrower Operator's Manual Comprehensive operator's manual for Husqvarna ST 424, ST 427, ST 430, ST 424T, ST 427T, and ST 430T snow throwers. Covers safety, assembly, operation, maintenance, and troubleshooting.
	Husqvarna Automower 105 Spare Parts List and Diagrams Comprehensive spare parts list and assembly diagrams for the Husqvarna Automower 105 robotic lawn mower. Includes part numbers, descriptions, and quantities for various components including the cover, chassis, blade motor, and charging station.
	Husqvarna Automower 315X Spare Parts List & Diagrams Comprehensive spare parts list and diagrams for the Husqvarna Automower 315X (2020 model). Find part numbers, descriptions, and quantities for all components.

Husqvarna ST 224 P Snow Thrower - Repair Parts

Auger Housing / Impeller Assembly

Auger Housing / Impeller Assembly Components

Auger Weld Ribs

Auger Housing / Impeller Assembly Tools

Auger Housing / Impeller Assembly Fasteners

Auger Housing / Impeller Assembly Components

Auger Housing / Impeller Assembly Brackets and Bolts

Control Panel / Discharge Chute Components

Control Panel / Discharge Chute Components

Control Panel / Discharge Chute Cables and Levers

Control Panel / Discharge Chute Controls and Braces

Control Panel / Discharge Chute Grips and Screws

Control Panel / Discharge Chute Components

Control Panel / Discharge Chute Cables

Control Panel / Discharge Chute Harness and Retainer

Control Panel / Discharge Chute Cables

Control Panel / Discharge Chute Rotator Assembly

Handles

Handles

Drive Components

Drive Components Diagram

Chassis / Engine / Pulleys Components

Chassis / Engine / Pulleys Mounting Plate

Chassis / Engine / Pulleys Components

Chassis / Engine / Pulleys Belt Cover

Wheels

Bag of Parts

Bag of Parts - Safety Ignition Key Kit

Decals

Decals and Manual Reference

Engine, LCT - Complete Engine Components

Engine, LCT - Additional Components

Related Documents