Appliance Parts & Electrical Accessories for Home Appliances | Currys Partmaster.co.uk
Appliance Parts & Electrical Accessories for Home Appliances | Currys Partmaster.co.uk
Currys | Washing Machines, Laptops, TVs, Consoles
Instruction Manual for Currys models including: A30A3M25 Curved Wfhd Gaming Monitor, A30A3M25, Curved Wfhd Gaming Monitor, Wfhd Gaming Monitor, Gaming Monitor, Monitora
Software and - ADXGaming
15 mai 2024 — Safety Warnings .....................................................................................................................................3.26 pages
File Info : application/pdf, 26 Pages, 2.77MB
DocumentDocumentFIRESIGHT 30HC200 30" 200Hz CURVED WFHD GAMING MONITOR INSTRUCTION MANUAL A30A3M25 Contents Safety Warnings..................................................................................................................................... 3 Unpacking.............................................................................................................................................. 5 Product Overview.................................................................................................................................. 6 Front View.............................................................................................................................................................................6 Rear View ..............................................................................................................................................................................6 Connections ........................................................................................................................................... 7 HDMI Connection ..............................................................................................................................................................7 DP Cable Connection .......................................................................................................................................................7 AUDIO Connection............................................................................................................................................................8 Using Earphones ................................................................................................................................................................8 Connecting to Mains Supply .........................................................................................................................................9 Installation ...........................................................................................................................................10 Assembling with the Base Stand...............................................................................................................................10 Adjusting angle ...............................................................................................................................................................12 Adjusting Height.............................................................................................................................................................12 Wall Mounting ................................................................................................................................................................. 13 Operation .............................................................................................................................................15 Switching On/Off ............................................................................................................................................................15 Display Settings...............................................................................................................................................................15 Customizing Settings ..........................................................................................................................15 Contextual Mode Settings...........................................................................................................................................15 Game Crosshair Mode Settings .................................................................................................................................15 General Settings..............................................................................................................................................................16 Virtual Response Time.........................................................................................................................18 Maintenance ........................................................................................................................................18 Cleaning the Unit............................................................................................................................................................18 Hints and Tips ......................................................................................................................................19 Specifications ....................................................................................................................................... 20 Safety Warnings · Read all the instructions carefully before using the unit and keep them for future reference. · Retain the manual. If you pass the unit onto a third party make sure to include this manual. · Check that the voltage marked on the rating label matches your mains voltage. · WARNING: Never let people (including children) with reduced physical, sensory or mental capabilities or lack of experience and / or knowledge use electrical devices unsupervised. · To avoid danger of suffocation, keep plastic bags out of reach of babies, children and domestic animals. · Carefully attach the stand to the monitor. If the stand is provided with screws, tighten the screws firmly to prevent the Monitor from tilting. Do not over tighten the screws and mount the stand rubbers properly. Damage · Please inspect the unit for damage after unpacking. · Do not continue to operate the unit if you are in any doubt about it working normally, or if it is damaged in any way - switch off, unplug from the mains socket and consult your dealer. Location of Unit · The unit must be placed on a flat stable surface and should not be subjected to vibrations. · Do not place the unit on sloped or unstable surfaces as the unit may fall off or tip over. · The mains socket must be located near the unit and should be easily accessible. · This unit is designed for indoor, domestic use only. · Use this monitor set at an altitude of less than 2000 meters above sea level, in dry locations and in regions with moderate or tropical climates. Wall Mounting · Read the monitor and wall mount instructions before mounting your monitor on the wall. · The wall mount bracket is not supplied, they can be purchased from your dealer. · Do not install the monitor on a ceiling or an inclined wall. · Only use the screws supplied with the wall mount bracket when attaching the monitor to the bracket. See your monitor instructions for screw type. · Tighten the wall mount screw firmly to prevent the monitor from falling. Do not over tighten the screws. · If you are in any doubt how to mount your monitor, contact a professional. Maintenance · Ensure to unplug the unit from the power supply before cleaning. · Do not use any type of abrasive pad or abrasive cleaning solutions as these may damage the unit's surface. · Do not use liquids to clean the unit. Temperature · Avoid extreme degrees of temperature, either hot or cold. Place the unit well away from heat sources such as radiators or gas / electric fires · Avoid exposure to direct sunlight and other sources of heat. · Naked Flames · Never place any type of candle or naked flame on the top of or near the unit. Moisture · To reduce the risk of fire, electric shock or product damage, do not expose this unit to rain, moisture, dripping or splashing. No objects filled with liquids, such as vases, should be placed on the unit. · If you spill any liquid into the unit, it can cause serious damage. Switch it off at the mains immediately. Withdraw the mains plug and consult your dealer. Ventilation · To prevent the risk of electric shock or fire hazard due to overheating, ensure that curtains and other materials do not obstruct the ventilation vents. · A minimum distance of 5 cm around the unit should be maintained to allow for sufficient ventilation. · Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure the unit is well ventilated. Safety · Always disconnect the unit from the mains supply before connecting / disconnecting 3 other devices or moving the unit. · Unplug the unit from the mains socket during a lightning storm and long inactivity periods (going on holiday). · In the interests of safety and to avoid unnecessary energy consumption, never leave the unit switched on while unattended for long periods of time, e.g. overnight, while on holiday or while out of the house. Switch it off and disconnect the mains plug from the mains socket. Mains Adapter Cable · Make sure the unit or unit stand is not resting on top of the mains adapter cable, as the weight of the unit may damage the cable and create a safety hazard. The mains plug is used as disconnect device, the disconnect device shall remain readily operable. Mains Adapter · The mains adapter will continue to draw electricity from the mains supply when plugged in the mains socket. In the interests of safety and to avoid unnecessary energy consumption, never leave the adaptor plugged in the mains socket while unattended for long periods of time. Disconnect the adapter from the power supply. Use only power supplies listed in the user instructions. Interference · Do not place the unit on or near appliances which may cause electromagnetic interference. If you do, it may adversely affect the operating performance of the unit, and cause a distorted picture or sound. Optimum viewing · View the unit in moderate light to prevent eye strain. It is recommended to watch the unit from a distance 3-7 times that of the screen height. LCD screen · The LCD screen is manufactured using high- precision technology. However, some tiny black points and / or bright points (red, blue or green in colour) may constantly appear on the LCD screen. These points are generated in the manufacturing process and are normal. Screen Burn · A characteristic of Plasma and Monitor Panels is that displaying the same image for a long time may cause a permanent after-image to remain on the screen. This is called screen burn. Most pictures shown on the unit will be constantly moving and fill the screen. · To prevent screen burn if viewing any of the above for long periods of time, reduce contrast and brightness when viewing. Once burn-in occurs it will never disappear completely. Standby · The button on the unit does not switch off the unit completely. The unit will continue to draw electricity from the mains supply while in standby. In the interests of safety and to avoid unnecessary energy consumption, never leave the unit in standby while unattended for long periods of time, e.g. overnight, while on holiday or while out of the house. Disconnect the mains plug from the mains socket. Supervision · Children should be supervised to ensure that they do not play with the unit. · Never let anyone especially children push anything into the holes, slots or any other openings in the case - this could result in a fatal electric shock. Earthing · Apparatus connected to the protective earthing of the building installation through the MAINS connection or through other apparatus with a connection to protective earthing - and to a monitor distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a monitor distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11). 4 Thank you for purchasing your new product. We recommend that you spend some time reading this instruction manual in order that you fully understand all the operational features it offers. You will also find some hints and tips to help you resolve any issues. Read all the safety instructions carefully before use and keep this instruction manual for future reference. Unpacking Remove all items from the packaging. Retain the packaging. If you dispose of it please do so according to local regulations. The following items are included: Main Unit Stand Stem Base Stand Mains Adapter Mains Cable DP Cable Mount Stud (31 mm) Mount Stud (42 mm) Screw and Washer × 4 (for wall mounting) 5 Product Overview Front View 1 2 1. Screen Display 2. Indicator · Light up blue while power on. · Light up red if no signal is detected. Rear View 1 1. Control Stick 2. Power Socket 3. HDMI 2 Socket 4. HDMI 1 Socket 6 HDMI 2 DP1 HDMI2 HDMI 1 DP2 DP1 2 3 45 6 7 5. DP 2 Socket 6. DP 1 Socket 7. AUDIO Socket Connections HDMI Connection Use the HDMI cable (not included) to connect the HDMI 1 or HDMI 2 socket of the unit to the HDMI OUT socket of your PC (not included). Rear View of Main Unit HDMI 2 DP1 HDMI2 HDMI 1 DP2 DP1 HDMI Cable Or (not included) PC (not included) DP Cable Connection Use the DP cable to connect the DP1 or DP2 socket of the unit to the DP OUT socket of your PC (not included). Rear View of Main Unit PC (not included) HDMI 2 DP1 HDMI2 HDMI 1 DP2 DP1 Or DP Cable 7 AUDIO Connection Use an audio cable (not included) to connect the AUDIO socket of the main unit and an AUDIO IN socket of an audio device (e.g. speaker; not included). Rear View of Main Unit HDMI 2 DP1 HDMI2 HDMI 1 DP2 DP1 Audio Cable (not included) Audio device (not included) Using Earphones Turn down the volume from the source input before using the earphones (not included). Connect the earphones to the AUDIO socket. Slowly raise the volume with the earphones on until you reach your desired volume. Rear View of Main Unit HDMI 2 DP1 HDMI2 HDMI 1 DP2 DP1 Earphones (not included) Long-term exposure to loud music may cause hearing damage. It is best to avoid extreme volume when using earphones, especially for extended periods. If you select the main unit (A30A3M25) for audio output in your computer, make sure that you have a valid AUDIO connection. 8 Connecting to Mains Supply 1. This unit operates with a mains adapter and cable (included). 2. Connecting the unit to any other power source may damage the unit. Unwind the mains cable and mains adapter to their full length. Connect the end of the cable of the mains adpater to the Power socket of the unit, and then connect the end of the mains cable to the mains adapter. Connect the mains plug into the mains socket. 3. Make sure the mains plug is fully inserted into the mains socket, and the cable of adapter fully inserted into the Power socket of the unit. The unit is now connected and ready to use. 4. To switch the unit off completely, unplug the mains plug the mains socket. Rear View of Main Unit HDMI 2 DP1 HDMI2 HDMI 1 DP2 DP1 Mains Socket Mains Adapter Mains Cable Ensure all connections are completed before connecting to the mains power socket. 9 Installation Assembling with the Base Stand 1. Take out the unit with the foam. Gently place it on a flat surface. Remove the upper foam cover. Take out the monitor from the film bag, and then place it onto the lower foam cover Upper foam cover Lower foam cover 2. Install the stand stem onto the base stand. Fasten the quick release screw on the base stand. Quick Release Screw Stand Stem Base Stand 10 3. Install the assembled base stand with the main unit. Slide the stand into the back of the unit until you hear a "click" sound. Make sure that the stand is securely installed before you lift up or move the unit. 4. Stand the main unit in upright position. During standing of the whole monitor, do not press the liquid crystal screen with hand to avoid damage to the screen. 11 Adjusting angle You may adjust the angle of the screen for a comfortable viewing experience. The angle of the screen can be adjusted forwards or backwards from -5° to 20°, or swiveled from side to side between -20° to 20°. -5° 20° -25° -25° 25° 25° Adjusting height 115 mm Do not touch or press the screen area when adjusting the angle and the height of the monitor. 12 Wall Mounting 1. Take out the unit with the foam. Gently place it on a flat surface. 2. Remove the upper foam cover. Take out the monitor from the film bag, and then place it onto the lower foam cover Lower foam cover 3. Tighten the mounting studs at the rear of the main unit, as shown below. Mount Stud (42 mm) Mount Stud (31 mm) 13 4. Install the unit onto the wall with the wall stud (not included), and then mount it onto the wall. Wall Stud (not included) Mount Stud (42 mm) (installed) Screw Washer Mount Stud (31 mm) (installed) The mounting hole distance of the mount for the unit is 75 × 75 mm. · Make sure that all the screws and studs are firmly installed. · Do not place or hang any object on the mounted unit. · Do not hang the unit over 2 meters from the ground. 14 Operation Switching On/Off · Press the control stick to switch on the unit. The display will show the ADX logo. · Press the control stick again to switch off the unit. · Unplug the mains plug and adapter from the mains socket to switch off the unit completely. Display Settings 1. Slide the control stick to the right to enter submenu / menu, or confirm your selection. 2. Slide the control stick upwards to enter Contextual Mode menu. 3. Slide the control stick to the left to return to the previous menu, or select the input source. 4. Slide the control stick downwards to enter Game Crosshair Mode Settings menu. The unit will show No Signal, and then Enter Sleep Mode if no input source is detected. Then the unit will enter Sleep mode. Customizing Settings Contextual Mode Settings 1. Slide upward the control stick to enter the Contextual menu. 2. Slide the control stick upward/downward to select Movie / Reading / Night Mode. Game Crosshair Mode Settings 1. Slide downward the control stick to enter the Contextual menu. 2. Slide the control stick upward/downward to select your desired setting, and then slide the control stick to the right to confirm. You may reconfigure the Hotkey1-3 Setting in the OSD Settings menu. The default setting of the Hotkeys are as below: · Hotkey1 (left): Enter the Input Source menu. · Hotkey2 (up): Enter the Contextual Mode menu. · Hotkey3 (down): Enter the Game Crosshair Mode menu. 15 General Settings 1. Slide the control stick to the right to enter the General Settings menu. 2. Slide the control stick upwards/downwards to select the following options 3. Slide the control stick to the right to confirm your settings. 4. Slide the control stick to the left to exit from the submenu, or from the menu screen. 200hz 2560 1080 To enter the General Settings menu, make sure that your unit is connected with a device with input signal. Otherwise, the unit will Enter Sleep Mode. Game Setting Picture Settings Standard Mode Standard Mode FPS Arena Mode MOBA Arena Mode Adaptive-Sync Shadow Balance Response Time Refresh Rate Game Crosshair Game Time Dynamic Brightness Virtural Response Time Ambient Lighting Brightness Contrast DCR Contextual Model Low Blue Light Sharpness Gamma Aspect Ratio Off/On Off/On Off/On Off/On Off/On 0-100 Off/Normal/Fast/Ultrafast Off/On/Position Off/Crosshair 1/Crosshair 2/Crosshair 3/Crosshair 4/Crosshair 5/Crosshair 6 Off/15:00/30:00/45:00/60:00/Position Off/Normal/Expert/Elaboration Off/On Off/Led Bar 0-100 0-100 Off/On Off/Movie mode/Reading mode/Night mode/Care eyes mode 0-100 0-5 1.8/2.0/2.2/2.4/2.6/S.curve Wide Screen/4:3/1:1/Auto 16 Colour Settings PIP/PBP OSD Settings Other Settings Warm Natural Cool User1 User2 User3 Hue Saturation PIP/PBP Mode Sub-Signal Source Auto Source PIP Position PIP Size Window Swap Language OSD Time Out OSD H-Position OSD V-Position OSD Transparency Hotkey1 Setting Hotkey2 Setting Hotkey3 Setting OSD Lock Input Signal Volume Mute Auto Power Eyeshield Remind Reset Information Off/On Off/On Off/On Off/On Off/On Off/On 0-100(R/G/B/C/M/Y) 0-100(R/G/B/C/M/Y) Off/PIP Mode/PBP 2Win 1:1 DP1/DP2/HDMI1/HDMI2 Auto/DP1/DP2/HDMI1/HDMI2 Top Right/Top Left/Bottom Right/ Bottom Left Small/Medium/Large Off/On English 50-60 0-100 0-100 0-5 Brightness/Contrast/Volume/Mute/ Shadow Balance/Game Crosshair/ Refresh Rate/Game Time/Contextual Model/PIP/PBP Mode/Input Signal /Dynamic Brightness Off/On Auto/DP1/DP2/HDMI1/HDMI2 0-100 Off/On Off/On Off/On No/Yes Input Source: /Resolution: /Mode: 17 OSD Lock setting · Once the OSD Lock is set ON, the on screen display will be locked after exiting from the General Setting menu. The OSD lock indicator will show if you press or slide the control stick. · To unlock, press the control stick, then slide it to the right and hold for about 5 seconds to deactivate the feature. OSD Lock ON Virtual Response Time The unit supports Virtual Response Time. It provides a better display on fast moving images. You may adjust the "Virtual Response Time" setting in OSD menu. Virtual Response Time: Off Virtual Response Time: Ultrafast Maintenance Cleaning the Unit Ensure the unit is fully unplugged from the mains socket before cleaning. · Use a soft dry cloth to wipe away the dust from the screen and surfaces. · If the surfaces are extremely dirty, clean the monitor with a cloth which has been dipped in a slightly soapy water. Wring the cloth until it is almost dry, then use it to wipe the monitor. · Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching the monitor on. · Never use alcohol, benzine, paint-thinner, cleaning fluid or other chemicals. · Do not use compressed air to remove dust. 18 Hints and Tips The following table contains various hints and tips to get the best performance from your monitor. If you require additional assistance: · For UK, please call our UK Call Centre on 0344 561 1234. · For Ireland, please call our Ireland Call Centre on 0818 810575. Problem No image on screen Out of Focus or poor image No audio output Solution · Make sure that the unit is switched on. · Make sure that the unit is connected with a mains socket with power supply. · Make sure that the correct input is selected. Check if the image signal cable is inserted properly. Connect the main unit with a audio equipment, speaker or earphones, and then increase the volume of the connected device. If problem(s) persists, contact a qualified service agent for assistance. 19 Specifications Brand Model Aspect Ratio Viewing Angle Pixel Pitch Contrast Ratio Colours Screen Resolution (Horizontal × Vertical) (pixel) Maximum Refresh Rate Power Input Dimension (L × W × H) Tilting Angle Rotation Angle Height Adjustment Range Environmental Action conditions Storage Energy Efficiency Class Screen diagonal (cm / inches) Power Consumption Average Energy Consumption Standby Power Consumption Brightness Panel System Net Weight Gross Weight Input / Output Sockets HDMI DP AUDIO OUT ADX A30A3M25 21:9 178°(H) / 178°(V) 0.2697 (H) × 0.2697 (V) mm 3000:1 (TYP) 16.7M 2560 × 1080 200 Hz 12V 4.0A approx. 701.1 × 121.7 × 317.6 mm (without base) approx. 701.1 × 269.3 × 536.3 mm (with stand base installed) Forward titling: 5°(±2°) Backward tilting: 20°(±2) -25° (±2°) / + 25°(±2°) 115 mm ±5 Temperature: 0°C~ 40°C Humidity: 10%~90% RH (non-condensing) Temperature: -20°C~ 60°C Humidity: 5%~95% RH (non-condensing) F 76.2 / 30 38W 25 kWh/1000h 0.5 W 300 cd/m2 30 inch LED backlit LCD panel 5.76 kg include monitor + stand + base 6.19 kg include the completed monitor with package 2 2 1 20 On mode power demand in Standard Dynamic Range (SDR) Off mode, power demand, if applicable Standby mode power demand, if applicable Electronic display category Visible screen area Panel technology used Minimum guaranteed availability of software and firmware updates (from the date of end of the placement on the market) (Years) Minimum guaranteed availability of spare parts (from the date of end of the placement on the market) (Years) Minimum guaranteed product support (Years) Minimum duration of the general guarantee offered by the supplier (Years) Power supply type 25 W 0.3 W 0.4 W Monitor 20.1 dm2 LCD 8 7 7 5 External Mains Adapter Energy related Products (ErP) Directive Model Manufacturer Input Voltage Input AC frequency Output voltage Output current Output power Average active efficiency Efficiency at low load (10%) No-load power consumption GQ48-120400-E1 Dongguan City Gangqi Electronic Co., Ltd 100-240V~ 50/60 Hz 1.5 A Max 50-60 Hz DC 12.0 V 4.0 A 48.0 W 88.5% 86.9% 0.09W Features and specifications are subject to change without prior notice. 21 Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories. With over 1 million spares and accessories available we can deliver direct to your door the very next day. Visit www.partmaster.co.uk or call 0344 800 3456 (UK customers only). Calls charged at National Rate. The symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product. The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. Currys Group Limited (co. no. 504877) 1 Portal Way, London, W3 6RS, UK EU Representative Currys Ireland Limited (259460) 3rd Floor Office Suite, Omni Park SC Santry, Dublin 9, Republic of Ireland IB-UK-A30A3M25-240422V1 Product Information Sheet COMMISSION DELEGATED REGULATION (EU) 2019/2013 with regard to energy labelling of electronic displays Parameter Parameter or value and Unit precision 1. Supplier's name or trademark. ADX Supplier's address. Customer Services, 3RD FLOOR OFFICE SUITE, OMNI PARK SHOPPING CENTRE, SANTRY DUBLIN 9, SANTRY, DUBLIN 2. Model identifier A30A3M25 3. Energy Efficiency Class for Standard Dynamic Range F (SDR) 4. On mode power demand in SDR 25,0 W 5. Energy Efficiency Class for High Dynamic Range n.a. (HDR) 6. On mode power demand in HDR, if implemented n.a. W 7. Off mode, power demand, if applicable n.a. W 8. Standby mode power demand, if applicable 0,3 W 9. Networked standby mode power demand, if applicable 0,5 W 10. Electronic display category Monitor 11. Size ratio 21 : 9 12. Screen resolution 2 560 x 1 080 pixels 13. Screen diagonal 75,0 cm 14. Screen diagonal 30 inches 15. Visible screen area 20,1 dm² 16. Panel technology used LED LCD 17. Automatic Brightness Control (ABC) available No 18. Voice recognition sensor available No 19. Room presence sensor available No 20. Image refresh frequency rate (default) 200 Hz 21. Minimum guaranteed availability of software and firmware updates (from the date of end of the placement on the market) 8 Years 22. Minimum guaranteed availability of spare parts (from the date of end of the placement on the market) 7 Years 23. Minimum guaranteed product support 7 Years Minimum duration of the general guarantee offered by the supplier 5 Years 24. Power supply type External 25. External power supply (non standardized and included in the product box) i GQ48-120400-E1 Page 1 / 2 ii Input voltage 240 V iii Output voltage 12,0 V 26. External standardised power supply (or suitable one if not included in the product box) i- ii Required output voltage -V iii Required delivered current (minimum) -A iv Required current frequency - Hz Model placed on the Union market from 15/05/2024 EPREL registration number: 1992747 https://eprel.ec.europa.eu/qr/19 92747 Supplier: Currys Ireland Limited (Importer) Website: https://www.currys.co.uk Customer care service: Name: Customer Services Website: Email: customer.services@currys.ie Phone: +3531890 400 001 Address: 3RD FLOOR OFFICE SUITE, OMNI PARK SHOPPING CENTRE, SANTRY DUBLIN 9, SANTRY, DUBLIN Page 2 / 2