Instruction Manual for Komshine models including: KFLC-2, KFLC-2 OTDR Dead Zone Eliminator, OTDR Dead Zone Eliminator, Dead Zone Eliminator, Zone Eliminator, Eliminator
Катушка на 500 метров KomShine KFLC-2 OM2-500M в магазине Суперайс
KFLC-2 Enabling today. Inspiring tomorrow. OTDR Dead Zone Eliminator Features & Applications Compact, rugged, lightweight 100m300m500m1km2km lengths standard Available with a variety of connector styles Compact! Fits easily in OTDR cases or kits Adapters special storage bin design For use as OTDR launch cable For use as OTDR receive cable Measure insertion loss and reflectance of near- and far-end connections of a fiber optic link using an OTDR Use to test link loss with an OTDR OTDR Dead Zone Eliminator Portable Hanger Testing Inspection and Location OTDR optical fiber launch cable is used to measure the loss and reflectivity of the proximal connection and the remote non-corrupt insertion of the optical fiber line using OTDR. Each OTDR launch cable can be used as an OTDR transmitting and receiving cable, both of which were necessary to eliminate blind spots when measuring the complete line loss of the optical fiber with OTDR.OT DR launch cable adopts coiled design, easy to carry, compact and light.Various length options, very suitable for short, medium,long distance fiber network test applications How to Generate a Baseline Trace Using Fibre Rings · Use the Fibre Ring as a launch cable.Connect the Fibre Ring between your OTDR and the fibre link under test. This will allow you to measure the loss of the near-end connection. · Use the Fibre Ring as a receive cable.Connect the Fibre Ring to the far-end connector of your fibre link under test. This will allow you to measure the loss of the far-end connection. · By using the jump cable as a transmitting and receiving cable.You can measure the total insertion loss of the fiber link Product model: Configuration Standardcoupler Standardcoupler Standardcoupler Standardcoupler Standardcoupler Standardcoupler Standardcoupler Standardcoupler Standardcoupler Standardcoupler Product usage: Fiber type single-mode single-mode single-mode single-mode multi-mode multi-mode multi-mode multi-mode multi-mode multi-mode Length 150M 300M 500M 1KM 500M 1KM 500M 1KM 100M 300M Model OS2-150M, 9/125um OS2-300M, 9/125um OS2-500M, 9/125um OS2-1KM, 9/125um OM1-500M, 62.5/125um OM1-1KM, 62.5/125um OM2-500M, 50/125um OM2-1KM, 50/125um OM3-100M, 50/125um OM3-300M, 50/125um Product list: Appearance patent No.: 2022304170540.3 Utility model patent No.: 202221736376.5 Adapters special storage bin design HEAD OFFICE KomShine Technologies Limited CONTACT US Add: 2F Bldg. D Qinheng Tech. Pk. NanjingJS, 210001, China TEL: +86 ( 025 ) 66047688 * Komshine reserves the right to improve, enhance, or modify the features and specificactions of KomShine products without prior notification. *Company and product names appearing in this catalogue are resisterd marks or trademarks of respective companies. * This catalogue is printed using environmentally friendly paper and ink.Adobe Illustrator 24.0 (Windows)(Foxit Advanced PDF Editor) iLovePDF