Instruction Manual for ITC models including: 69642FF-X Navigation Light, 69642FF-X, Navigation Light, Light

Navigation Light - itc-us.com

3030 Corporate rove Dr. Hudsonville 9426 Pone: 16.396.155 itc-us.com For warranty information please visit www.itc-us.com/warranty-return-policy

69642 Navigation Light Install Instructions

Index of /files/resources/


File Info : application/pdf, 1 Pages, 223.41KB

PDF preview unavailable. Download the PDF instead.

69642 Navigation Light Install Instructions
Navigation Light
Part#: 69642FF-X
PARTS/TOOLS NEEDED:

INSTALLATION INSTRUCTIONS

Navigation Light

Hardware Pack

Power Drill (Not Provided)

Marine Wire Connectors

Wire Grommet (Not Provided)

Silicone Sealant (Not Provided)

IMPORTANT SAFETY INSTRUCTIONS. READ CAREFULLY FOR YOUR PROTECTION AND SAVE ALL INSTRUCTIONS. · Disconnect power before installing, adding or changing any component. · To avoid a hazard to children, account for all parts and destroy all packing materials. · It is recommended that fuse protection be added to the positive (+) input.

1. Drill a 3/4" hole in your mounting surface. Mark the screw
holes using the template and drill pilot holes. To prevent damage to the wires install a wire grommet.
The light can either be mounted from the top or the
bottom.
Top mount install: Remove the stainless steel cover. Feed the wires through the pre-drilled hole and mount the light to the boat facing straight forward. Use the screw from the hardware pack to affix the cover.
Bottom mount install:
Option 1: Remove the stainless steel and plastic cover and install nuts from the hardware pack. Affix to the boat with an M5 fastener of appropriate length holding down nut. Replace covers and affix with screw from hardware pack.
Option 2: Remove the stainless steel and plastic cover and
install nuts from the hardware pack. Replace covers and affix with screw from hardware pack. Affix to the boat with an M5
fastener of appropriate length holding down nut.

2. Wire the light based on the wiring diagram. Use silicone sealant
around the wires to prevent any ingress of water.

Incoming 12V DC Power

Load (+)

Neutral (-) Black (-)

Fuse Red (+)

3030 Corporate Grove Dr. Hudsonville, MI 49426 Phone: 616.396.1355
itc-us.com

For warranty information please visit www.itc-us.com/warranty-return-policy DOC #: 710-00178 · Rev B ·11/02/2022
Page 1 of 1



References

Adobe PDF Library 16.0.3 Adobe InDesign 17.0 (Macintosh)