AXENT REMOTE App Guide

Control your AXENT.ONE and AXENT.ONE PLUS shower toilets with the AXENT.REMOTE app.

Introduction

The AXENT.REMOTE app allows you to conveniently control all functions of your AXENT shower toilet via Bluetooth. You can save your preferred settings or adapt basic functions individually to your needs.

The app is available in multiple languages, including English, German, French, and Dutch.

1. Download and Install the App

The new AXENT.Remote app is available free of charge on the App Store for iOS and the Google Play Store for Android.

New version available from 1 April 2023.

To ensure a smooth user experience, it is recommended to uninstall any previous version of the app from your smartphone before installing the new one. This ensures a seamless and enjoyable experience.

Important: Both the Bluetooth connection of the shower toilet and your smartphone must be activated to use the app as a remote control.

Note: The Android application may request simultaneous access to location data.

Factory setting for Shower WC: Bluetooth is activated.

Downloads and Tutorials

Visit www.axentbath.ch for the complete user manual and intuitive videos explaining functions and settings for AXENT.ONE and AXENT.ONE Plus. Content covers app connection, proper care, and descaling processes.

2. Connecting the App with the Shower Toilet

Follow these steps to connect your smartphone to the shower toilet via Bluetooth:

Open the AXENT.Remote app on your smartphone.
Ensure Bluetooth is switched on for both your shower toilet and smartphone.
Be in the vicinity of the shower toilet.
Tap on ⚙️ 'Setting'.
Select 'Bluetooth'.
Tap on ? 'Scanning'.
Select your shower toilet model from the list.

Once paired, your smartphone and shower toilet are connected.

Note: It is possible to establish multiple smartphone Bluetooth connections with the shower toilet, but only one connection can be active at a time.

The app automatically detects the model of your shower toilet. The corresponding functions will be displayed in the main menu based on the paired model.

Features and Operation - AXENT.ONE

The AXENT.ONE shower toilet offers a range of functions controlled via the app:

? Lady Shower: Activates the shower process. Adjust water volume (spray strength), shower wand position, and water temperature in five stages. The process stops automatically after 3 minutes or can be stopped manually using the 'Stop' button.
? Rear Wash: (Implied function, often paired with Lady Shower)
? Emptying the Water Tank: Allows draining the water tank if the shower toilet is not used for an extended period. The tank refills automatically upon next use.
? System Rinse: Flushes all water-bearing parts with fresh water after periods of non-use. Stops automatically after 90 seconds or can be stopped manually.
? Night Light: Can be switched on/off or set to automatic mode, adjusting based on ambient brightness.
? Signal Tone: The audible beep can be switched on or off.
? Stand-by: Puts the shower toilet into a low-power mode for extended absences (e.g., holidays). To deactivate, lightly tap the rear cover on the left side.
⏹️ Stop: Cancels the current function at any time.
⚙️ Setting: Access additional functions, maintenance settings (e.g., descaling program), and toilet registration.

Features and Operation - AXENT.ONE PLUS

The AXENT.ONE PLUS offers advanced features:

? Lady Shower: Similar to AXENT.ONE, with adjustable water volume, wand position, and temperature (five stages). Includes massage functions (oscillating or pulsating). Stops automatically after 3 minutes or manually.
? Rear Wash: (Implied function)
✨ Self-cleaning: Automatically rinses the shower wand with fresh water when the user sits down. Can be activated or deactivated.
? Warm Air Hairdryer: Dries the user after showering. Temperature is adjustable in five levels. Stops automatically after 3 minutes or manually.
? Night Light: Same functionality as AXENT.ONE (on/off, automatic mode).
?️ Seat Temperature: Adjustable seat heating in five levels.
? ECO Mode: Offers 'Auto' or 'Off' options. In 'Auto' mode, the shower toilet learns usage patterns and activates seat heating according to a stored schedule, saving energy.
⏹️ Stop: Cancels the current function at any time.
⚙️ Setting: Access additional functions, maintenance settings (e.g., descaling program), and toilet registration.