User Manual for GERMAN models including: BD30B Built In Induction Cooker, BD30B, Built In Induction Cooker, In Induction Cooker, Induction Cooker, Cooker
GIC-BD30B
BUILT-IN INDUCTION COOKER
Online Warranty Registration
Please read these instructions and warranty information carefully before use and keep them handy for future reference.
USER MANUAL
Table of Contents
Installation Instructions Product Structure Operating Instructions Cookware Safety Cautions Care & Maintenance Troubleshooting Technical Specifications Warranty Terms & Conditions
P.2
Installation Instructions
Notice
There should not be any obstacles surrounding the unit
03
Make sure power plug is accessible after installation. Power outlet must be earthed
04
05
2 5 0 mm
06
1.
2.
250mm
For ventilation purposes, there should be no
less than 250 mm high empty space under
Air vent under the unit must be well circulated.
the unit body.
07
Circulation between space under the unit and room atmosphere should be present.
Procedures
08
Exhaust Successfully
09
Induction Cooker
Kitchen Worktop
O.K
10
Exhaust Unsuccessfully
1. 649mm(W) x 379mm(D)
Kitchen Worktop
11
According to cutout dimensions 649mm(W) x 379mm(D), make a cutout
Induction Cooker
WRONG
hole on the cabinet/counter top.
2. Attach the supplied rubber tape to the bottom part of the unit body, and then place unit through the cutout hole.
3. Connect power and cooker is ready to use.
Notes: When the induction cooker is installed, the exhaust outlet must be put ONTO the kitchen work-top, so that it can exhaust successfully. Please refer to the above pictures.
P.3
Product Structure
Main Body
Venting Outlet
Power Cord & Power Plug
Air Inlet
Main ON/OFF Switch
Control Panel
Timer
Cook-Top Panel
Cooking Ring Indicator
Control Panel
Power Level Setting
"" "" "Hot" Indicator "Power On" Indicator
"/" Timer/Cancel
"+/" "+/" (Adjustment)
P.4
"" "/"
"ON/OFF" Key
"Lock/Unlock" Key
Operating Instructions
""
Control Buttons Functions
"POWER ON / OFF" Key Turn on the Main ON/OFF Switch or under"Sleeping" mode), press to enter "Heating" mode (power inicator will be on). Press again to switch off operation and return to "Sleeping".
"E1"
Note: if no cookware is present or if cookware is not compatible, the digital display will show"E1" as a warning.
"/" """" "30""+/" (16199"01-99" 26"2h-6h" 3
"+/" "" ""() ""
"/" "" 3
1. """"
2. "" 3
"TIMER / CANCEL" Key Press this key to set timer. When the digits "30" are flashing, press "+" or "" key to adjust timer settings between 1 minutes to 6 hours (the timer indicator will display "01-99" when the timer setup is from 1 to 99 minutes and the timer indicator will display "2h-6h" when the timer setup is from 2 to 6 hours). Timer will start counting down when time display stops flashing. To cancel timer, press this key for 3 seconds.
"+/" Adjustment Keys Under "Sleeping" mode, press to enter "Heating mode" Under "Timer Mode" (i.e. when "Timer" Indicator lights up), press to adjust timer. Under "Heating" mode, press to set power level.
"LOCK/UNLOCK" Key Press this key to lock all settings at "Heating" mode or "Timer" mode. Under "Lock" status, induction cooker would not respond to any key press. Press this key for 3 seconds to unlock "Lock" status.
1. Connect power plug, and then turn on the Main ON/OFF switch. A "beep" sound is heard, indicating that cooker is in "Sleeping" mode.
2. Place cookware in the centre of cooking hob. Press "POWER" key and power indicator will light up, then press or indicating that cooker is in "Heating" mode. (Default value: Level 3)
"E1"
Note: if no cookware is present or if cookware is not compatible, the digital display will show"E1" as a warning.
3.
)
3. Press or to adjust power level. Note: if there is no cookware or cookware not appropriate, cooker will not start operation and a buzzing sound is heard.
Power table of single hob (One is as same as the another)
Power Level
Power
1 ( MIN)
300W
2 800W
3 1100W
4 1200W
5 1300W
6 1400W
7 1500W
8 1600W
9 1700W
10 ( MAX)
2000W
4. "" "/"" " 16 (199"01-99"26 "2 h - 6 h")
5. (2800W) 6(1400W)6 (1400W)7(1500W) 5(1300W)8 (1600W)4(1200W)
4. In "Heating" mode, press "TIMER/CANCEL" key to enter "Timer" mode. Press or to set shutdown time ranging from 1 minutes to 6 hours (the timer indicator will display "01-99" when the timer setup is from 1 to 99 minutes and the timer indicator will display "2h-6h" when the timer setup is from 2 to 6 hours).
5. When 2 hobs are under "heating mode" simultaneously, the cooker will limit power level to prevent mal-function caused by over-power: if the current hobs has been turn up to a certain level, the rest one will level down automatically. For example, the current hob is in the 6th level (1400W), the another hob will be limited within the 6th (1400W); the current hob is in the 7th level (1500W), the another hob will be limited within the 5th (1300W); the current hob is in the 8th level (1600W), the another hob will be limited within the 4th (1200W).
P.5
Cookware
Please use only German Pool authorized cookware or cookware recommended by us. Any unauthorized cookware may affect induction cooker's heating capacity and quality.
- :
- : 12 cm 25 cm 6 kg
Appropriate Cookware
- Material: Metal, ferromagnetic stainless steel or cast iron
- Shape: Flat bottom with a diameter of 12 cm or more. Cookware bottom diameter should not exceed 25 cm and must not weight over 6 kg (with food)
Ferromagnetic Stainless Steel Water Pot
Metal Frying Pan
Ferromagnetic Metal Saucepan Stainless Steel Cooking Pot
/
Ferromagnetic Cast Iron Grilling Metal Water Pot Pan
- :
- : 8 cm
Inappropriate Cookware
- Material: Non-metallic, non-ferromagnetic, ceramic, glass, aluminum or brass
- Shape: Bottom not flat or too bumpy, or bottom diameter smaller than 8 cm
Aluminum Water Pot
Glass Pot
Ceramic Pot
Pot With Non-Flat/ Curved Bottom
Pot With Bumpers
Pot Bottom Too Small
P.6
Safety Cautions
· 145215
· 13A
·
·
·
· 10 cm
·
·
·
·
·
·
·
·
· ""
· , ,
WARNING: If the surface (panel) is cracked, switch off the appliance to avoid the possibility of electric shock.
WARNING: Metallic objects such as knives, forks, spoons and lids should not be placed on the induction hotplate since they can get hot.
WARNING: This appliance is intended to be used in indoor household ONLY.
WARNING: This appliance is not intended to be operated by means of an external timer or separate remotecontrol system.
WARNING: The temperature of accessible surfaces may be high when the appliance is operating.
WARNING: If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard.
· When the appliance powers on but without pressing any control button, the appliance will stop heating automatically in 1 hour 45 minutes to 2 hours 15 minutes and goes into standby mode; this ensures the safety of the appliance.
· Single 13 A power jack must be used. Do not share power jack with other appliances.
· Do not apply water directly onto induction cooker.
· Do not insert any wire or metal objects through air inlet or venting outlet of the induction cooker.
· Please avoid collision between cook-top panel and cookware.
· A distance of at least 10 cm between the wall and the sides of induction cooker must be reserved for venting purposes.
· Do not place or use induction cooker near any heat source.
· Do not heat up any metal plate or other magnetic objects on the cook-top.
· Do not heat empty cookware for an extended time. Overheating of cookware will cause damages and injuries.
· Do not heat up unopened cans on the cook-top. It may cause explosion.
· Unplug the power cord when induction cooker is not use for long period of time.
· This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
· Children should be supervised to ensure that they do not play with the appliance.
· Cannot use steam cleaner.
· After use, please pass the "power" key to turn off.
· This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels and other residential type environments.
P.7
Care & Maintenance
· ·
·
·
·
· ·
·
·Power plug must be disconnected before cleaning.
·Any stain or deposit on the cook-top surface must be cleaned off immediately before reusing.
·Cleaning must be done when cook-top surface has completely cooled down.
·To clean the cook-top, wipe with a dry cloth. If stain remains, clean with a moist sponge soaked with mild soap, and then wipe again with a moist cloth.
·To clean the body of induction cooker, wipe with a soft moist cloth. If stain remains, clean with a moist sponge soaked with mild soap, and then wipe with a moist cloth.
·Do not immerse induction cooker into water.
·Do not clean cook-top with any rough cloth or abrasive tool.
·Do not use organic solvents or any cleaning products that contain chemicals such as Benzene.
· · · ·
Note : Over time, cook-top panel may be discoloured due to one of the following situations. Operation of induction cooker would not be affected as this is normal.
·Overheating or burning empty cookware ·Spillage not cleaned immediately ·Cookware not clean ·Long period of usage
P.8
Troubleshooting
When you run into any problem operating this product, use the table below to troubleshoot the problem. If the problem persists, contact our Repairs & Customer Service Centre.
Phenomenon
"/"
Check-up Items
·? ·
? ·?
Solution · ·
·
Power is connected and Main on/off switch is turned on,but the induction cooker does not respond when the on/off button is pressed.
·Is there a power shortage in your area?
·Is there a short circuit in the power source of your home?
·Is the power plug too loose or not connected well?
·Try again after power supply resumes.
·Find out the cause of short circuit and eliminate it before switching on the cooker again.
·Re-connect the plug or replace the power jack.
·? ·?
· ·
Buzzer beeps continuously and pan is not heated.
·Is the pan not suitable for induction cooking?
·Is the pan positioned properly?
·? ·?
·?
·Use an appropriate pan.
·Position the pan in the centre of cook-top.
· ·
·
Induction cooker stops heating during normal operations.
·Is the pan empty or cooking temperature too high?
·Are the air inlet and outlet being blocked?
·Is the surrounding temperature too high?
·?
·Avoid operating cooker with an empty pan. Let cooker cool down before switching it on again.
·Remove obstruction from the vent. Let induction cooker cool down and try again.
·Try again after the room cools down.
·
Temperature fluctuates.
·Is pan bottom not flat?
·Replace pan with a flat-bottomed one.
* * * Above table enlists the most common problems regarding the operations of the product and their possible causes as well as suggested solutions.
It is strictly for users' reference only. * Should there be any product malfunction or breakdown, DO NOT repair it yourself. Contact our Repairs & Customer Service Centre or consult a
licensed technician immediately.
P.9
Troubleshooting
E0
Internal circuit error
E5
Top plate sensor open/short circuit
E1
Without cookware or incompatibile cookware used
E6
IGBT IGBT senor open /short circuit
E2
IGBT IGBT overheat
E7
Top plate overheat
E3
Over-voltage
E8
Power Sharing Failure
E4
Under-voltage
Solution
E1E2E7
E0E3-E6E8 When showing signal E1, E2 and E7, please check if the cookware is not suitable, or switch on the appliance again after it is cooled down naturally. When showing signal E0, E3-E6 and E8, please contact customer service and repair centre. * E3E4130V250V * E3 & E4 are not product errors. Operation can be resumed when power voltage returns to normal rating (130V - 250V).
Technical Specifications
Model
GIC-BD30B
Voltage
220 - 240 V
Frequency
50/60 Hz
Rated Power Output
2800 W
Number of Cooking Hob
2
Maximum Output of Cooking Hob
( Left) 2000 W / ( Right) 2000 W
Dimensions
(H) 95mm (W) 675mm (D) 405mm
Cutout Dimensions
(W) 649mm (D) 379mm
Net Weight
Approx. 10.5 kg
Gross Weight
Approx. 12.3 kg
Power Adjustment Range
300 W - 2800 W
Execution Standards
EN 60335-1:2012+A11:2014 EN 60335-2-9:2003+A1:2004+A2:2006+A12:2007+A13:2010 EN 62233:2008
Specifications are subject to change without prior notice.
If there is any inconsistency or ambiguity between the English version and the Chinese version, the Chinese version shall prevail. www.germanpool.com Refer to www.germanpool.com for the most up-to-date version of the Operating Instructions.
P.10
()
Warranty Terms & Conditions
Under normal operations, the product will gurantee a 1-year full warranty provided by German Pool (effective from the date of purchase).
*
1) www.germanpool.com/ warranty
2)
* This warranty is not valid until customer registration information is received by our Service Centre within 10 days of purchase via one of the following means:
1) Visit our website and register online: www.germanpool.com/ warranty
2) Complete all the fields on the attached Warranty Card and mail it back to our Customer Service Centre.
Please fill out the form below. This information and the original purchase invoice will be required for any repairs. Warranty will be invalidated if information provided is found to be inaccurate.
Model No. : GIC-BD30B
Serial No. :
Invoice No. :
Purchased From :
Purchase Date :
1.
2. - - () -
3. - - - -
4.
5.
1-3
145
10
3
+852 2333 6249
+853 2875 2699
+852 2356 9798
+853 2875 2661
repairs@germanpool.com
1. Customer who fails to present original purchase invoice will not be eligible for free warranty service.
2. Customer should always follow the operating instructions. This warranty does not apply to: - labour costs for on-site installation, check-up, repair, replacement of parts and other transportation costs; - damages caused by accidents of any kind (including material transfer and others); - operating failures resulting from applying incorrect voltage, improper usage, and unauthorized installations or repairs.
3. This warranty is invalid if: - the purchase invoice is modified by an unauthorized party; - the product is used for any commercial or industrial purposes; - the product is repaired or modified by unauthorized personnel, or unauthorized parts are installed; - the serial number is modified, damaged or removed from the product.
4. German Pool will, at its discretion, repair or replace any defective part.
5. This warranty will be void if there is any transfer of ownership from the original purchaser.
Customer Service & Repair Centre
Hong Kong, China
Macau, China
10/F, Kowloon Godown
3/F, Edificio Industrial Pou Fung,
1-3 Kai Hing Road, Kowloon Bay,
145 Rua de Francisco Xavier Pereira,
Kowloon, Hong Kong Tel : +852 2333 6249
Macau Tel : +853 2875 2699
Fax : +852 2356 9798
Fax
Email : repairs@germanpool.com
: +853 2875 2661
This warranty is valid only in Hong Kong and Macau
( ) German Pool (Hong Kong) Limited
Hong Kong, China
116 2113
Room 113. Newport Centre Phase II. 116 Ma Tau Kok Road. Tokwawan. Kowloon. Hong Kong. Tel: +852 2773 2888 Fax: +852 2765 8215
Mainland China
8
8th, Xinxiang Road, Wusha Industrial Park, Daliang, Shunde, Foshan, Guangdong, China Tel: +86 757 2388 1896 Fax: +86 757 2980 8318
Macau, China
145
3
3/F, Edificio Industrial Pou Fung, 145 Rua de Francisco Xavier Pereira, Macau Tel: +853 2875 2699 Fax: +853 2875 2661
HONG KONG TOP BRAND TEN YEAR ACHIEVEMENT AWARD
© © All rights reserved. Copying, reproducing or using the contents of this manual is not allowed without prior authorization from German Pool, violators will be prosecuted.
GIC-BD30B-M-18(8.1)
Adobe PDF Library 15.0 Adobe InDesign CC 13.1 (Windows)