Non-Electric Bidet Attachment with Adjustable Water Pressure

Product Overview

The Non-Electric Toilet Seat Bidet Attachment offers a hygienic and eco-friendly alternative to traditional toilet paper. It attaches easily to most standard two-piece toilets and requires no electricity or batteries. The attachment features an adjustable water pressure control and a self-cleaning nozzle for optimal hygiene.

Key Features:

• Non-electric operation
• Adjustable water pressure control
• Self-cleaning nozzle function
• Easy installation
• Fits most standard toilets
• Durable construction

Installation Guide

Before beginning installation, ensure you have all the necessary parts and tools. Turn off the water supply to your toilet before starting.

Step 1: Turn Off Water Supply

Locate the water shut-off valve behind your toilet and turn it clockwise until it stops. Flush the toilet to drain the tank.

Step 2: Remove Existing Toilet Seat

Unscrew the bolts that secure your current toilet seat to the toilet bowl. Lift the old seat off.

Step 3: Install Bidet Attachment

Place the bidet attachment onto the toilet bowl, aligning the mounting holes with the bolt holes on the toilet. Ensure the nozzle is positioned correctly between the toilet seat and the bowl.

Step 4: Secure the Bidet Attachment

Insert the provided bolts through the bidet attachment and the toilet bowl. Secure them with the nuts on the underside of the toilet bowl. Tighten firmly but do not overtighten.

Step 5: Connect Water Supply

Disconnect the existing water supply hose from the toilet tank. Connect one end of the provided T-adapter to the fill valve of the toilet tank. Connect the other end of the T-adapter to the toilet's water supply hose. Connect the bidet hose to the remaining outlet on the T-adapter.

[Diagram showing T-adapter connection to toilet tank, water supply hose, and bidet hose]

Step 6: Turn On Water Supply

Slowly turn the water shut-off valve counter-clockwise to restore the water supply. Check all connections for leaks. If leaks are detected, tighten the connections further.

Step 7: Test the Bidet

Sit on the bidet seat and turn the control knob to test the water spray. Adjust the water pressure using the control knob as needed.

Usage Instructions

To use the bidet, simply sit on the seat and turn the control knob. The nozzle will extend and spray water. Adjust the water pressure to your comfort level. After use, turn the knob back to the off position. The self-cleaning function will activate, rinsing the nozzle.

Tips for Use:

• Start with low water pressure and gradually increase as needed.
• Ensure the nozzle is clean before and after each use.
• For optimal hygiene, use the bidet after each bowel movement.

Maintenance and Cleaning

The bidet attachment is easy to maintain. Regularly clean the exterior with a mild soap and water. The nozzle can be cleaned using the self-cleaning function or by gently wiping it with a soft cloth.

Troubleshooting:

• No water spray: Check that the water supply is turned on and all connections are secure.
• Low water pressure: Ensure the water shut-off valve is fully open and check for any kinks in the bidet hose.
• Leaking: Tighten all connections.