Instructions for Eastlake models including: STOUR Traditional Tower Rail, STOUR, Traditional Tower Rail, Tower Rail, Rail
Eastlake Traditional Flat Heated Towel Radiator
CONGRATULATIONS You are the proud owner of an exclusive Stour Traditional Towel Rail which has been specially produced by our craftsmen who would wish you to enjoy many years of satisfaction from it. INSTALLATION This product must be installed by a fully qualified engineer. · Please consider using an Eastbrook Valve Set this will ensure that your radiator looks its best with matching radiator valves. · On commissioning, flush the central heating system thoroughly using a proprietary solution to ensure that aggressive substances such as fluxes and manufacturing residue, from which internal surfaces of your radiator can sustain irreparable damage are removed. A specifically approved inhibitor needs to be subsequently added to the heating system in order to protect the radiator and other parts of the central heating system to promote extended operating lifespan. Please ensure, when adding inhibitor, not to underdose or overdose and follow the inhibitor instructions. The Ph level of the system water should be between 6.5 and 7.5 The inhibitor must not be based nitrate based! Do not used softened water in your radiator! Beware of own brand inhibitors! Eastbrook recommends FERNOX F1 or equivalent inhibitor for your radiators. MAINTENANCE · From time to time it is advisable to clean your towel rail with a warm damp cloth. Never use any form of abrasive cleaner or chemical. · Corrosion inhibitor must also be regularly maintained, please consult your engineer for details. IMPORTANT · Maximum working pressure of this radiator is 4 bar. · This radiator is to be used on Domestic Central Heating systems only. (Not suitable for use on direct hot water systems). Please consult your engineer or supplier. WARRANTY Your Stour Traditional Towel Rail has a manufacturer's warranty for five years in respect of defective materials and workmanship and subject to installation being carried out by a qualified engineer in accordance with good practice and the appropriate corrosion inhibitor being regularly maintained. REMEMBER ...... Excellence is worth looking after. HELPLINE Phone : 01452 317890 HELPLINE email : technical@eastbrookco.comiTextSharp 5.1.1 (c) 1T3XT BVBA