Minimex Super Rich Espresso Machine

Safety Information

Please read the following safety information carefully before use:

1. Ensure that the household power system matches the power system of the machine before use.
2. The Minimex Super Rich espresso machine must be grounded. Please check the grounding system of the house's power outlet to ensure it is installed correctly.
3. Install the machine away from children. Close supervision is required if the user is a child or an inexperienced user.
4. Do not place the machine near a stove or any heat source.
5. Turn off the switch and unplug the machine every time you clean the machine. Allow the machine to cool down before cleaning.
6. If the power cord is frayed or the machine malfunctions in any way, stop using it immediately and contact the service center.
7. Do not use accessories that are not part of the machine, as this may cause damage, electric shock, and danger to the body.
8. Ensure that the power cord is not tangled or scraped by metal edges, which could cause electric shock.
9. Do not let the power cord be strained or exposed to heat.
10. Be careful not to let your hands or any part of your body touch the hot surfaces of the machine. Only grip the handle of the filter holder.
11. Do not immerse the machine or power cord in water or any other liquid, as this may cause electric shock.
12. Do not leave the machine in freezing conditions.
13. Do not fill the water tank with more than 1.7 liters or above the maximum level.
14. If the machine malfunctions or shows any abnormal symptoms, stop using it immediately and contact the service center at Tel: 0-2817-8999.
15. Do not use the machine outdoors.
16. Keep this manual for future reference.

Troubleshooting

Components

Refer to the diagram for component identification:

• 1. Power Switch
• 2. Coffee Button
• 3. Steam Button
• 4. Hot water button
• 5. Drip piece
• 6. Drip tray
• 7. Steam nozzle
• 8. Steam / hot water knob
• 9. Steam indicator
• 10. Coffee indicator
• 11. Water tank
• 12. Water tank cover
• 13. Top cover / Cup warmer
• 14. Coffee Spoon
• 15. Filter
• 16. Filter holder

For the First Use

1. Move the coffee maker from the package, and check the accessories according to the list.
2. Clean all the detachable components.
3. Operate the appliance according to the sections "B. MAKE ESPRESSO COFFEE" and "C. FROTHING MILK/ MAKE CAPPUCCINO" (without coffee powder in the filter). Repeat 2-3 times.

Make Espresso Coffee

1. Open the lid, take out the water tank, and pour appropriate water into the tank. Do not exceed the MAX capacity.
2. Put back the water tank and close the lid.
3. Connect the power plug, press the power button. The machine will automatically pump water for about 8 seconds. The coffee and steam indicators will light up. The coffee indicator will flash during preheating. When the water temperature in the boiler is ready for brewing, the coffee indicator will stop flashing and light up. This process takes approximately 3 minutes.
4. Take out the filter holder, pour the appropriate amount of ground coffee into the filter using the coffee spoon, and press the coffee powder down firmly.
5. Lock the filter holder into the group head.
6. Place a cup under the coffee outlet.
7. Start brewing by pressing the coffee button.
8. Remove the filter holder, knock out the used coffee grounds, and clean the filter and filter holder immediately. Lock it again for the next use.

Note: Check the water level in the tank frequently. Refill if necessary. Avoid touching hot surfaces of the machine with your hands, especially the brewing outlet and steam nozzle.

Frothing Milk / Make Cappuccino

1. Prepare espresso first with a large enough cup, according to section "B. MAKE ESPRESSO COFFEE".
2. Use cold, fresh milk (8-10°C) and pour about 1/3 of the milk into the frothing pitcher. The volume of milk will increase after frothing.
3. Press the steam button. The machine will start preheating, and the steam indicator will flash. Wait for the indicator light to turn on.
4. Place a stainless steel cup under the steam nozzle.
5. Open the knob to release steam. Insert the steam nozzle into the milk, just below the surface. Adjust the height of the cup to froth the milk.
6. When finished, turn off the knob. Pour the frothed milk into the prepared espresso. Your cappuccino is now ready.

Note: Purge steam to clean the steam nozzle after use. Be careful of hot surfaces.

Make Hot Water

1. Turn on the hot water switch.
2. Insert a stainless steel container under the steam nozzle.
3. Turn the knob to open the steam. Hot water will be ejected into the container. Turn off the hot water when the desired amount is reached.
4. Turn off the hot water switch.

Note: Check the water level in the tank frequently. Refill if necessary. Avoid touching hot surfaces of the machine with your hands, especially the brewing outlet and steam nozzle.

Heating Liquid

1. Pour cold liquid into a stainless steel cup, filling it to about 1/2 of the cup.

Note: The cup diameter should not be less than 70 ± 5mm.

1. Press the steam button. The machine will start preheating, and the steam indicator will flash. Wait for the indicator light to turn on.
2. Place the cup under the steam nozzle.
3. Turn on the knob, release steam, and insert the steam nozzle into the liquid.
4. Turn off the knob when the desired temperature is reached.

Note: When steam stops, clean the steam nozzle immediately and release the liquid in the pipe to prevent scaling. The surface temperature of the steam pipe is very high during use, so be careful not to get scalded.

Cleaning and Maintenance

1. Turn off the machine and wait for it to cool down.
2. Wipe the machine housing with a damp cloth. Do not use abrasive sponges, detergents, or solvents. Do not immerse the machine in water.
3. Clean the steam outlet, ensuring there is no blockage.
4. Clean the coffee outlet and the rubber seal.
5. Turn on the steam switch to rinse the coffee outlet until no coffee oil residue remains.
6. Clean all detachable components and dry them thoroughly.

Cleaning Mineral Deposits

1. The machine builds up limescale deposits over time, and descaling is recommended every 2-3 months.
2. Pour water and descaler into the water tank up to the MAX capacity (water and descaler ratio is 4:1). Follow the descaler's instructions. You can use a household descaler or citric acid (water and citric acid ratio is 100:3).
3. Lock the filter holder (without coffee powder) into the group head.
4. Press the coffee button, then brew about 150ml of coffee. When the coffee indicator lights up, turn off the coffee button. Turn on the steam button, open the knob after the steam indicator lights up, release steam for about 2 minutes, and then turn off the knob. Allow the descaler to sit in the machine for at least 15 minutes.
5. Repeat step 4 three times.
6. Press the coffee button to brew coffee until there is no descaler left.
7. Brew coffee again (without coffee powder), repeat step 4 three times (no need to wait 15 minutes), then brew until there is no water left in the boiler.
8. Repeat step 7 at least three times to ensure the piping is clean.

Product Specification

Warranty

The warranty for this Minimex Super Rich covers defects in parts and materials for a period of 1 year from the date of purchase. This warranty does not cover normal wear and tear, or damage caused by accidents (e.g., dropping the machine, power surges). This warranty is void if the user does not operate the machine according to the instructions in this manual, or if service is performed by unauthorized third parties. For more information, please contact the Minimex service center at Tel: 02-817-8999.

Indicator Tips

Self-Help Troubleshooting

IMPORTANT SAFEGUARDS

1. Before using the machine, always carefully read and comply with all these instructions. We cannot accept any responsibility for the consequences of improper use.
2. Check the voltage to ensure that the voltage indicated on the nameplate agrees with your voltage.
3. This appliance has a grounded plug. Please ensure the wall outlet in your house is well-earthed.
4. Close supervision is necessary when the appliance is used by people. Place the machine out of the reach of children and persons with limited capabilities.
5. Do not place on or near a hot gas or electric burner or in a heated oven.
6. Unplug from the outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
7. Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair, or adjustment.
8. The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons.
9. Be careful to ensure that the power cable does not become trapped and does not rub against sharp edges.
10. Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
11. Do not touch any hot parts. Use the handle of the funnel.
12. To protect against fire, electric shock, and injury to persons, do not immerse the cord, plugs, or body of the machine in water or other liquid.
13. It must be protected against freezing conditions.
14. Please fill the water tank up to the upper MAX mark, but not more than 1.7L of pure water.
15. If a fault, defect, or machine drop occurs due to a suspicious defect, unplug the power plug immediately. Do not operate the malfunctioning machine.
16. Do not use outdoors.
17. SAVE THESE INSTRUCTIONS.