Christie - audio visual products, solutions, and services
Christie Inspire series 1DLP projectorsWarrantiesChristie Inspire series 1DLP projectors
Installation Guide for CHRISTIE models including: DWU860-iS, 1DLP Laser Projector, DWU860-iS 1DLP Laser Projector, Laser Projector, Projector
For the most current technical documentation, visit www.christiedigital.com. Christie Digital Systems Canada Inc. Kitchener ph: 519 744 8005 Christie Digital Systems USA, Inc.
File Info : application/pdf, 49 Pages, 5.64MB
DocumentDocumentInstallation and Setup Guide 020-001933-01 Inspire Series WUXGA NOTICES COPYRIGHT AND TRADEMARKS Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. All brand names and product names are trademarks, registered trademarks or trade names of their respective holders. GENERAL Every effort has been made to ensure accuracy, however in some cases changes in the products or availability could occur which may not be reflected in this document. Christie reserves the right to make changes to specifications at any time without notice. Performance specifications are typical, but may vary depending on conditions beyond Christie's control such as maintenance of the product in proper working conditions. Performance specifications are based on information available at the time of printing. Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied warranties of fitness for a particular purpose. Christie will not be liable for errors contained herein or for incidental or consequential damages in connection with the performance or use of this material. Canadian manufacturing facility is ISO 9001 and 14001 certified. For the most current technical documentation and office contact information, visit www.christiedigital.com. WARRANTY Products are warranted under Christie's standard limited warranty, the details of which are available at https://www.christiedigital.com/help-center/warranties/ or by contacting your Christie dealer or Christie. PREVENTATIVE MAINTENANCE Preventative maintenance is an important part of the continued and proper operation of your product. Failure to perform maintenance as required, and in accordance with the maintenance schedule specified by Christie, will void the warranty. REGULATORY The product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the product is operated in a commercial environment. The product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of the product in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at the user's own expense. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. CAN ICES-3 (A) / NMB-3 (A) (A ) , . ENVIRONMENTAL The product is designed and manufactured with high-quality materials and components that can be recycled and reused. This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from regular waste. Please dispose of the product appropriately and according to local regulations. In the European Union, there are separate collection systems for used electrical and electronic products. Please help us to conserve the environment we live in! Content Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Safety and warning guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 AC/ pow er pr ecaut ions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 I nstallation safety and warning guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Laser safet y precaut ions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Light int ensit y hazard dist ance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Pr oduct labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Pr oj ect or ov er v iew . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Cont act y our dealer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Key features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 How t he proj ector works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 List of com ponent s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Pr oduct docum ent at ion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Relat ed docum ent at ion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Installation and setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Site requirem ents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Phy sical oper at ing env ir onm ent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Pow er connect ion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Phy sical specificat ions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Pr oj ect or com ponent s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Fr ont v iew . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Rear v iew . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Left view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Right v iew . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Built- in keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 I nput / Out put ( I / O) panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 I R rem ote keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Posit ioning t he display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 I nstalling the ceiling m ount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Adj ust ing t he Pr oj ect ed I m age . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Adj ust ing t he Pr oj ect or 's Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Stacking Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Cleaning or inst alling t he filt er . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Inspire Series Installation and Setup Guide 3 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Content Connect ing t o AC pow er . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Turning on t he proj ect or . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Turning off t he proj ect or . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 LED st at us indicat or . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 St at us LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Shut t er LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Setting up the proj ector lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Adj usting the zoom and focus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Adj usting lens position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Reset t ing t he lens t o hom e posit ion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Calculat ing t he lens offset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Connecting to devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Connect ing t o a com put er . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Connect ing t o v ideo equipm ent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Configuring communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Setting network environm ent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Adj ust ing LAN set t ing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Adj ust ing WLAN set t ing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Adj usting network setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Setting serial port baud rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Enabling ser ial por t echo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Logging on t o t he web user int erface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Using t he web int erface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Using t he RS- 232 C int er face . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Re- connect ing t he net w or k . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Signal connectivity specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 VGA video form at s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 HDMI video form at s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 HDBaseT video form ats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Pict ur e- in- pict ur e/ pict ur e- by - pict ur e ( PI P/ PBP) com pat ibilit y . . . . . . . . . . . . . . . . . . . . . . . 49 Regulatory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Laser safet y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Elect r o- m agnet ic com pat ibilit y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Em issions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Immunity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Env ir onm ent al . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Inspire Series Installation and Setup Guide 4 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Introduction This m anual is int ended for Chr ist ie qualified inst aller s and t r ained oper at or s of I nspir e Ser ies proj ection system s. For com plet e I nspir e Ser ies pr oduct docum ent at ion and t echnical suppor t , go t o www.christiedigital.com. This proj ect or is int ended for use in a non- cinem a environm ent . Safety and warning guidelines Read all safet y and w ar ning guidelines befor e inst alling or oper at ing t he pr oj ect or . This pr oj ect or m ust be operat ed in an environm ent t hat m eet s t he operat ing range specificat ion. Use only t he at t achm ent s and/ or accessor ies r ecom m ended by Chr ist ie. Use of ot her s m ay r esult in t he r isk of fire, shock, or personal inj ury. Warning! I f not avoided, t he following could result in deat h or serious inj ury. · Do not operate the product without all of its covers in place. · FI RE HAZARD! Keep hands, clot hes, and all com bust ible m at erial away from t he concent rat ed light beam of the proj ector. · TRI P OR FI RE HAZARD! Posit ion all cables where t hey cannot cont act hot surfaces, be pulled, be tripped over, or dam aged by persons walking on or obj ects rolling over the cables. · SHOCK HAZARD! Disconnect t he product from AC before inst alling, m oving, servicing, cleaning, rem oving com ponents, or opening any enclosure. · OPTI CAL RADI ATI ON HAZARD! Disconnect t he power plug from t he AC out let if t he product is not being used for an extended period of tim e. · Do not allow anything to rest on the power cord. · Do not use under the following conditions: - I n extrem ely hot, cold or hum id environm ents. (i) Ensure t hat t he am bient room t em perat ure is wit hin 5° C t o 40° C ( st orage - 10° C t o 60° C) (ii) Relat ive hum idit y is 10% t o 85% RH ( st orage 5% t o 90% RH) . - I n areas susceptible to excessive dust and dirt. - Near any appliance generating a strong m agnetic field. - I n direct sunlight. Inspire Series Installation Installation and Setup Guide 5 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Introduction Caution! I f not avoided, t he following could result in m inor or m oderat e inj ury. · Always provide proper ventilation for t he product to prevent overheat ing. · Only Christ ie qualified t echnicians are perm it t ed t o open product enclosures. · All procedures m ust be perform ed by Christ ie qualified t echnicians. Notice. I f not avoided, t he following m ay result in equipm ent or propert y dam age. · Do not expose the product to m oisture. · Always use a lens plug when inst alling or m oving t he product . This prevent s cont am inant s from entering the product. · Only use cleaning solut ions recom m ended by Christ ie. All ot her cleaning solut ions m ay cause product dam age and will void the warranty. AC/power precautions Read all AC/ pow er pr ecaut ions befor e inst alling or oper at ing t he pr oj ect or . Warning! I f not avoided, t he following could result in deat h or serious inj ury. · FI RE HAZARD! Do not use a power cord, harness, or cable t hat appears dam aged. · FI RE OR SHOCK HAZARD! Do not overload power out let s and ext ension cords. · SHOCK HAZARD! Only use t he AC power cord provided wit h t he product or recom m ended by Christ ie. · FI RE AND SHOCK HAZARD! Do not at t em pt operat ion unless t he power cord, power socket , and power plug m eet the appropriate local rating standards. · SHOCK HAZARD! Do not at t em pt operat ion if t he AC supply is not wit hin t he specified volt age and current , as specified on the license label. · SHOCK HAZARD! The AC power cord m ust be insert ed int o an out let wit h grounding. · SHOCK HAZARD! Disconnect t he product from AC before inst alling, m oving, servicing, cleaning, rem oving com ponents, or opening any enclosure. · I nstall the product near an easily accessible AC receptacle. Installation safety and warning guidelines Read all inst allat ion safet y and w ar ning guidelines befor e inst alling t he pr oj ect or . Warning! I f not avoided, t he following could result in deat h or serious inj ury. · High leakage current present when connected to I T power system s. Caution! I f not avoided, t he following could result in m inor or m oderat e inj ury. · ELECTRI CAL and BURN HAZARD! Use caut ion when accessing int ernal com ponent s. · Only Christ ie qualified t echnicians are aut horized t o use t he t ools provided in t he t oolbox. Laser safety precautions This pr oduct is classified as Class 1 Laser Pr oduct - Risk Gr oup 2 accor ding t o I EC 6 082 5- 1: 20 14 com plies w it h FDA r egulat ions 21 CFR 104 0. 1 0 and 1 040 . 11 as a Risk Gr oup 2 , LI P ( Laser I llum inat ed Pr oj ect or ) as defined in I EC 62 471 : 2006 ex cept for dev iat ions pur suant t o Laser Not ice No. 50 , dat ed June 2 4, 20 07. Inspire Series Installation Installation and Setup Guide 6 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Introduction Warning! I f not avoided, t he following could result in deat h or serious inj ury. · This proj ect or has a built - in Class 4 laser m odule. Never at t em pt t o disassem ble or m odify t he proj ector. · Any operat ion or adj ust m ent not specifically inst ruct ed in t he User m anual creat es t he risk of hazardous laser radiation exposure. · Do not open or disassem ble the proj ector as this m ay cause dam age or exposure to laser r adiat ion. · Do not st are int o beam when t he proj ect or is on. The bright light m ay result in perm anent eye dam age. · When turning on the proj ector, m ake sure no one within proj ection range is looking into the lens. · Follow all inst allat ion, operat ion, adj ust m ent , and m aint enance procedures t o avoid possible exposure to hazardous laser radiation. Inspire Series Installation Installation and Setup Guide 7 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Introduction Product labels Learn about t he labels t hat m ay be used on t he product . Labels on your product m ay be yellow or black and white. General hazards Hazar d w ar nings also apply t o accessor ies once t hey ar e inst alled in a Chr ist ie pr oduct t hat is connected to power. Fire and Shock Hazard To prevent fire or shock hazards, do not expose t his product t o rain or m oist ure. Do not alter the power plug, overload the power outlet, or use it with extension cords. Do not rem ove the product enclosure. Only Christ ie qualified t echnicians are aut horized t o service t he product . Electrical Hazard Risk of elect ric shock. Do not rem ove the product enclosure. Only Christ ie qualified t echnicians are aut horized t o service t he product . Notice! I f not avoided, t he following could result in propert y dam age. General hazard. Electrical labels I ndicates the presence of an earth ground. Inspire Series Installation Installation and Setup Guide 8 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Laser labels Introduction Do not look direct ly int o t he lens. The ext rem ely high bright ness can cause perm anent eye dam age. This proj ect or has been classified as Class 1 Laser Product - Risk Group 2 according t o t he I EC 60825- 1: 2014 and I EC 62471- 5: 2015 st an dar d. I ndicat es a light hazard. Do not look direct ly int o t he lens. The ext rem e high brightness can cause perm anent eye dam age. Class 1 Laser Product - Risk Group 2 according t o Class 1 I EC 608251: 2014 and I EC 62471- 5: 2015. Mount above t he heads of children. Christ ie recom m ends using a ceiling m ount t o place t he product above eye-level for children. Make sure t o adj ust t he feet of t he t op proj ect or before st acking t o avoid dam age to the lower proj ector. Inspire Series Installation Installation and Setup Guide 9 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Introduction Projector overview The I nspire Series is a high bright ness, professional proj ect or syst em designed wit h laser phosphor t echnology and Digit al Light Pr ocessing ( DLPTM) t echnology fr om Tex as I nst r um ent s. Wit h it s superior im age quality and high brightness level, the product can be used for various large venue applicat ion r anging fr om fix ed inst allat ion, r ent al st age and LBE ( Locat ion Based Ent er t ainm ent ) , but not intended to use for dom estic purpose. Contact your dealer Recor d t he infor m at ion about y our pr oj ect or and k eep t his infor m at ion w it h y our r ecor ds t o assist w it h t he ser v icing of y our pr oj ect or . I f y ou encount er a pr oblem w it h y our Chr ist ie pr oj ect or , cont act your dealer. Purchase record Dealer: Dealer or Christ ie Sales/ Service cont act phone num ber: Proj ect or serial num ber: The serial num ber can be found on t he license label Purchase dat e: I nst allat ion dat e: Ethernet settings Default gateway: Proj ect or I P address: Subnet m ask: Key features Underst and t he im port ant feat ures of t he proj ect or. · WUXGA 1920 × 1200 resolut ion · High picture quality with superb brightness perform ance · Powered lens adj ust m ent wit h lens m em ory funct ion · Proj ect ion lens com pat ibilit y: DWU760- iS/ DWU860- iS/ DWU960- iS/ DWU960ST- iS: · Horizontal offset ranges with half im age size: + / - 110% · Vert ical offset ranges wit h half im age size: + / - 50% Measurem ent s com ply wit h indust ry st andards where offset is calculat ed as a rat io of t he num ber of pixels shifted up or down to half im age size. Inspire Series Installation Installation and Setup Guide 10 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Introduction · Full HD 3D t echnology wit h fram e sequent ial up t o 120 Hz · Christ ie Twist TM and Myst iqueTM allow for easy and quick blending and warping. Support for Myst iqueTM cam era based alignm ent syst em ( sold separat ely) · A wide range of connect ivit y including HDMI , HDBaseT, and 3D input s · I nt egrat ed HDBaseT solut ion support s HD video st ream ing t hrough RJ45 · SNMP t raps and em ail not ificat ions · 10- bit im age processor electronics with m odular design · All video form at s can be resized t o full screen eit her horizont ally or vert ically while m aint aining aspect ratio. · The proj ect or can be operat ed using any of t he following: · The built - in keypad, t he infrared ( I R) rem ot e keypad, a wired rem ot e keypad, or a PC/ device using serial com m unicat ions ( Et hernet or RS232) · A web page using Et hernet , or from a PC or device using a wireless USB dongle How the projector works The I nspire Series proj ect or accept s a variet y of input signals for a wide range of com m ercial proj ection applications. Designed with red and blue solid-state illum ination light sources and phosphor technology, the red, green and blue color elem ent s are m odulat ed by one Digit al Microm irror Device ( DMD) panel responding to incom ing data stream s of digitized red, green, and blue color inform ation. As these digit al st ream s flow from t he source, light from t he responding on pixels of t he DMD panel is reflected, converged, and then proj ect ed to t he screen t hrough proj ection lenses, where all pixel reflections are superim posed in sharp full- color im ages. List of components This pr oj ect or com es w it h all t he it em s list ed below . Check t o m ak e sur e y our pack age is com plet e. I f anything is m issing, contact your dealer. · I R rem ote keypad · Product Safet y Guide Inspire Series Installation Installation and Setup Guide 11 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Introduction Product documentation For inst allat ion, set up, and user infor m at ion, see t he pr oduct docum ent at ion av ailable on t he Chr ist ie Digit al Sy st em s USA I nc. w ebsit e at www.christiedigital.com. Read all inst r uct ions befor e using or servicing this product. 1. Access t he docum ent at ion from t he Christ ie websit e: · Go t o t his URL: https://bit.ly/3fXJcI3 or https://www.christiedigital.com/products/projectors/all-projectors/inspire-series/ · Scan t he QR code using a QR code reader app on a sm art phone or t ablet . 2. On t he product page, select t he m odel and swit ch t o t he Downloads t ab. Related documentation Additional inform ation on the proj ector is available in the following docum ents. · Christie Inspire Series Product Safety guide (P/N: 020-001932-XX) · Christie Inspire Series User Manual (P/N: 020-001934-XX) · Christie Inspire Series Service Manual (P/N: 020-001935-XX) · Inspire Series Serial API Commands Technical Reference (P/N: 020-103542-XX) Inspire Series Installation Installation and Setup Guide 12 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Installation and setup Learn how t o inst all, connect , and opt im ize t he proj ect or display. Site requirements To safely inst all and operat e t he proj ect or, t he inst allat ion locat ion m ust have rest rict ed access for authorized personnel only and m eet these m inim um requirem ents. Physical operating environment Pr ov ides specificat ions for t he oper at ing env ir onm ent . · Am bient t em perat ure ( operat ing) : 0° C t o 40° C ( 32° F t o 104° F) up t o 762 m ( 2500 feet ) · Hum idit y ( non- condensing) : 10% t o 85% RH · Operat ing alt it ude: 3048 m ( 10,000 feet ) at 0° C t o 30° C ( 32° F t o 86° F) am bient t em perat ure Power connection The proj ect or uses an AC power syst em t hat allows t he proj ect or t o operat e at full bright ness wit h a pow er supply r anging fr om 100 t o 240 VAC, depending on t he m odels and r egions. Oper at ing t he device outside of the voltage range m ay cause unsatisfactory operation or dam age to the proj ector. Chr ist ie r ecom m ends a 20 A r at ed w all br eak er for t he inst allat ion. To ensur e safe oper at ion, only use t he AC pow er cor d pr ov ided w it h t he pr oduct or r ecom m ended by Chr ist ie. See Connecting to AC power on page 28 for further inform ation on t he power requirem ents. Physical specifications Learn t he dim ensions and weight of t he proj ect or before inst allat ion. · Proj ect ion size ( L x W x H) : 18.8" x 15.9" x 6.1" ( 480 x 406 x 157 m m ) · Shipping size ( L x W x H) : 25.5" x 22.4" x 14.9" ( 650 x 570 x 380 m m ) · Weight: · DWU760- iS: 12.9 kg ( 28.4 lbs) · DWU860- iS, DWU960- iS, and DWU960ST- iS: 13.85 kg ( 30.5 lbs) Inspire Series Installation and Setup Guide 13 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Installation and setup · Shipping weight : · DWU760- iS: 16.45 kg ( 36.2 lbs) · DWU860- iS, DWU960- iS, and DWU960ST- iS: 17.4 kg ( 38.3 lbs) Projector components I dentify the m ain com ponents of the proj ector. Front view I dentify the m ain com ponents on the front of the proj ector. 4 1 2 ID Part name 1 LED st at us indicat ors 2 Proj ect ion lens 3 Adj ust able feet 4 Front I R sensor 3 Description Displays t he stat us of t he proj ect or. Allows powered and autom atic lens shifting and adj ust m ent : vert ical and horizontal offsets, zoom , and focus. Raises or lowers t he feet t o level t he proj ect or. Receives signals from t he I R rem ot e keypad. Keep t he signal pat h t o t he sensors unobstructed for uninterrupted com m unicat ion with the project or. Inspire Series Installation and Setup Guide 14 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Rear view I dentify the m ain com ponents on the rear of the proj ector. Installation and setup 1 ZOOM FOCUS 2 3 5 4 ID Part name 1 I nput / Out put ( I / O) panel 2 Built-in keypad 3 AC input 4 Power but t on 5 Kensington lock Description Connect s t he proj ect or t o ext ernal devices. Cont rols t he proj ect or. Connect s t o t he supplied power adapt er. Powers t he proj ect or on or off. Secures the proj ect or to counter tops, tables, and so on. Left view I dentify the m ain com ponents on the left side of the proj ector. 1 ID Part name Description 1 Cooling air vent s ( int ake) Provides cooling t o t he proj ect or. Keep t hese vent s unobst ruct ed t o prevent the projector from overheating. Inspire Series Installation and Setup Guide 15 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Right view I dentify the m ain com ponents on the right side of the proj ector. Installation and setup 1 ID Part name 1 Cooling air vent s ( ex h au st ) Description Provides cooling t o t he proj ect or. Keep t hese vent s unobst ruct ed t o prevent the proj ector from overheating. Built-in keypad The built - in keypad cont rols t he proj ect or. 9 1 8 2 3 7 4 ZOOM FOCUS 6 5 ID Button Description 1 Four Direct ional Select Keys Use STW X t o select it em s or m ake adj ust m ent s t o your select ion. 2 LENS SHI FT S Adj ust s t he lens sett ing. 3 ENTER Confirm s your it em select ion. 4 FOCUS X Adj ust s t he im age focus. 5 KEYSTONE T Adj ust s keystone. 6 EXI T Exit s t he current page and ret urns t o t he previous page. 7 MENU Press MENU t o launch t he on- screen display ( OSD) m enu. To exit t he OSD, press MENU and EXI T again. 8 Po w er Turns t he proj ect or on or off. 9 ZOOM W Adj ust s t he im age size. Inspire Series Installation and Setup Guide 16 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Installation and setup Input/Output (I/O) panel I dent ify t he com ponent s of t he I nput / Out put ( I / O) panel. 1 2 3 45 6 14 13 12 11 10 9 8 7 ID Connector name 1 12V OUT 2 3D SYNC ( I N) 3 3D SYNC ( OUT) 4 USB ( 5V 1.5A) 5 AUDI O I N 6 AUDI O OUT 7 RS232- C ID Connector name 8 VGA I N 9 HDMI OUT 10 HDMI 1 ( v2.0 4K) 11 HDMI 2 12 LAN 13 HDBaseT 14 REMOTE I N Inspire Series Installation and Setup Guide 17 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Installation and setup IR remote keypad The I R rem ot e keypad com m unicat es wit h t he proj ect or by way of wireless com m unicat ions. I f you choose to use a cable, not supplied, it m ust be 20 m ( 65.7 ft) or less. I f the length of cable exceeds 20 m (65.7 ft), the I R rem ote keypad m ay not work correctly. 1 2 SHUTTER 16 3 17 4 18 5 19 20 6 VGA BNC HDMI1 21 HDMI2 DVI-D DP 7 22 3G-SDI HDBaseT CVBS 8 PRESENT. 9 23 10 24 25 11 26 12 27 13 14 28 15 29 ID Button 1 SHUTTER 2 ON 3 GAMMA 4 BRI GHT Description Displays or blanks the video im age. Turns t he proj ect or on. Adj usts the m id- range levels. Adj ust s t he am ount of light in the im age. Inspire Series Installation and Setup Guide 18 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. ID Button 5 PI P PBP 6 SI ZE 7 Num ber Keys 8 HELP 9 MENU 10 Arrow Keys 11 TEST 12 AUTO 13 OSD 14 KEYSTONE H 15 KEYSTONE V 16 STANDBY 17 CONTR 18 HOT KEY 19 SWAP 20 LAYOUT 21 FOCUS 22 Z OOM 23 PROJ 24 EXI T 25 ENTER 26 I NPUT 27 I NFO 28 LENS H 29 LENS V Installation and setup Description Turns pict ure- in- pict ure/ pict ure- by- pict ure ( PI P/ PBP) on or off. Adj ust s t he PI P/ PBP size. Ent er a num ber, such as a channel, value, and so on. The on- screen display ( OSD) indicat es if a funct ion is not support ed. Displays t he instructions for source connect ion. Displays t he m enus. Adj ust s a set ting up or down to navigate within a m enu. Displays a t est pat tern. Autom atically optim izes an im age. Hides or shows OSD m enus. Adj ust s t he horizontal keystone. Adj ust s t he vertical keyst one. Turns t he proj ect or off. Adj ust s t he difference bet ween dark and light . Selects your preset key quickly. Swaps t he m ain and PI P/ PBP im ages. Adj ust s t he PI P/ PBP layout . Adj ust s t he focus t o im prove im age clarity as required. Adj ust s t he zoom to achieve a required im age size. Changes t he I R rem ot e keypad I D. · To assign an I D, press PROJ + < 1 t o 9> . · To ret urn t o t he universal I R rem ot e I D, press PROJ + 0. Ret urns t o t he previous level or exit s m enus if at t he t op level. Selects a highlighted m enu it em , or changes or accept s a value. Select s an input for t he m ain or PI P/ PBP im age. Displays the proj ector inform ation. Adj ust s t he posit ion of t he im age horizontally. Adj ust s t he posit ion of t he im age vert ically. Inspire Series Installation and Setup Guide 19 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Installation and setup Positioning the display When you select a position for the proj ector, consider the size and shape of your screen, the location of your power outlets, and the distance between the proj ector and the rest of your equipm ent . Follow t hese gener al guidelines: · Posit ion t he proj ect or on a flat surface at a right angle t o t he screen. The proj ect or ( wit h t he standard lens) m ust be at least 1.33 m ( 4.3 ft) from the projection screen. · Posit ion t he proj ect or t o t he required dist ance from t he screen. The dist ance from t he lens of the proj ector to the screen, the zoom setting, and the video form at determ ine the size of the proj ected im age. · Determ ine the lens throw ratio. For m ore inform at ion det ailing t he t hrow rat io for each lens, refer t o t he Inspire Series Lens Throw Ratios Technical Reference (P/N: 020-103497-XX). · 360 degree free orientation operation When inst alling t he proj ect or in port rait orient at ion, Christ ie recom m ends t he built in keypad and power input s face upwards. This allows access t o t he built in keypad and power connect ions during oper at ion. Inspire Series Installation and Setup Guide 20 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Installation and setup Installing the ceiling mount The proj ect or can be invert ed and suspended from t he ceiling using a specially designed ceiling m ount fix t ur e ( Chr ist ie One Mount 108 - 506 102- XX) . For m or e infor m at ion, cont act y our dealer . Warning! I f not avoided, t he following could result in deat h or serious inj ury. · When not m ounted properly, the projector m ay fall. · Keep at least 15 m m (0.6 inch) gap between the ceiling m ount and the bottom intake vents of the projector. · Avoid installing the projector near a heat source. Caution! I f not avoided, t he following could result in m inor or m oderat e inj ury. · The warrant y on t his proj ect or does not cover dam age caused by t he use of a non- recom m ended ceiling m ount kit or inst allation of the ceiling m ount kit in an im proper locat ion. · Refer t o t he inst allat ion inst ruct ions and safet y guidelines provided in t he kit ( such as Christ ie One Mount , P/ N: 108- 506102- XX) . · Dam age resulting from incorrect inst allation voids the warrant y. 1. To prevent dam age t o your proj ect or, use t he Christ ie- recom m ended ceiling m ount . 2. To use a t hird part y ceiling m ount kit , ensure t he screws used t o at t ach a m ount t o t he proj ector m eet the following specifications: · Screw t ype: 40 m m for Christ ie One Mount 108- 506102- XX 198.86 186.00 Len s 144.00 156.86 M4(4X) 480.00 486.00(WITH ID RIB) 240.00 233.00 140.00 405.66 431.84(WITH LENS COVER) 85.00 170.00 Unit : m m Inspire Series Installation and Setup Guide 21 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Installation and setup Adjusting the Projected Image Adj ust the proj ected im age's height and horizont al tilt for better viewing. Adjusting the Projector's Height The proj ect or is equipped wit h elevat or feet for adj ust ing t he im age height . 1. Locat e t he adj ust able foot you want t o m odify on t he underside of t he proj ect or. 2. Rot at e t he adj ust able ring clockwise t o raise t he proj ect or or count er clockwise t o lower it . 3. Repeat wit h t he rem aining feet as needed. Tilt - Adj ust m ent Feet Tilt - Adj ust m ent Ring For st acking applicat ion, t he elevat or feet of t he upper proj ect or m ust be adj ust ed t o increase t he height of t his proj ect or t o avoid t he int erference bet ween t wo proj ect ors. For m ore inform at ion on stacking proj ectors, please refer to Stacking Application on page 26. Inspire Series Installation and Setup Guide 22 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Installation and setup Stacking Application I f two proj ectors are m ounted on top of each other without using a fram e, adj ust the rubber feet of the upper proj ector to avoid the interference between the two proj ectors. The m axim um adj ust able range of t he rubber foot is 13 m m ( 0.5 inches) . Adj ust the rubber feet to avoid in t er f er en ce. I nterference between two proj ect ors. I nterference between two proj ectors. Inspire Series Installation and Setup Guide 23 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Installation and setup Cleaning or installing the filter Regular ly clean or r eplace t he filt er s in t he pr oj ect or t o ensur e dust and ot her for eign m at er ials ar e kept out of the proj ector. 1. Turn off t he proj ect or. 2. Rem ove t he filt er cover. 3. Rem ove t he filt er from it s com part m ent . 4. Clean or replace t he filt er. Replace fog filt er s aft er each use of t he pr oj ect or t o a m ax im um of 20 hour s. The life of t he filt er is approxim at ely 20 hours based on environm ent al condit ions. Leave t he filt ers in t heir sealed packaging until ready for use. Do not re- use the fog filters as they clog up with oil and the proj ector overheats and shuts down. Inspire Series Installation and Setup Guide 24 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Installation and setup Connecting to AC power To operat e t he proj ect or at full bright ness, m ake sure t he power supply m eet s t he power r equir em ent s for I nspir e Ser ies pr oj ect or s. For m or e infor m at ion, r efer t o Power connection on page 16. Model name DWU760- iS DWU860- iS DWU960- iS DWU960ST- iS Parameter Power rat ing Power consum pt ion Power rat ing Power consum pt ion Power requirements 100 t o 240 VAC, 50/ 60 Hz, 5.0A 500 W maximum 100 t o 240 VAC, 50/ 60 Hz, 6.5A 650 W maximum For m ore inform at ion det ailing t he power requirem ent s, refer t o t he Inspire Series WUXGA Specification Guide (P/N: 010-108881-01). To ensure safe operat ion, only use t he AC power cord provided wit h t he product or recom m ended by Chr ist ie. Connect t he AC pow er cor d t o t he AC inlet on t he pr oj ect or . Inspire Series Installation and Setup Guide 25 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Installation and setup Turning on the projector The proj ect or cables m ust be securely connect ed before t urning t he power on. Warning! I f not avoided, t he following could result in deat h or serious inj ury. · Do not look int o t he proj ect or lens when t he laser is on. The bright light m ay result in perm anent eye dam age. 1. Plug t he proj ect or in t o AC power. The Power but t on on t he built in keypad is illum inat ed when t he power cables are connect ed. 2. Ensure t hat no one or no obj ect s are in t he beam pat h before t urning on t he proj ect or. 3. To t urn on t he proj ect or, on t he I R rem ot e keypad or on t he built - in keypad press . The st at us LED is green wit h a long blink. 4. To select an input source and t urn it on, on t he I R rem ot e keypad select INPUT. Available input sources are VGA, HDMI 1, HDMI 2, and HDBaseT. The proj ect or det ect s t he source you select ed and displays t he im age. 5. I f using t he proj ect or for t he first t im e, select a preferred language from t he Main Menu aft er the startup screen is displayed. Turning off the projector Pow er off t he pr oj ect or in pr epar at ion for inspect ion or m aint enance. 1. To t urn t he proj ect or off, on t he I R rem ot e keypad or built - in keypad press . A warning m essage appears on the displayed im age. 2. To confirm your select ion, press again. I f you do not press again, the warning m essage disappears after three seconds and the proj ector rem ains on. When a m alfunct ion or system failure occurs, 1. Turn off t he proj ect or. 2. Disconnect t he power plug. 3. Connect t he plug of t he power cable t o t he proj ect or. 4. Turn on t he device. 5. I f t he act ions described in it em s 1.- 4. did not lead t o t he desired result , please cont act CHRI STI E t echnical support or an aut horized CHRI STI E service cent er. Inspire Series Installation and Setup Guide 26 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Installation and setup LED status indicator LED st at us indicat or helps ident ify t he pr oj ect or st at e. LEDs ar e defined below . Status LED I dent ify t he LED st at e color s and m eaning. LED status Off Green ( flashing) Green ( solid) Blue ( flashing) Blue ( solid) Yellow ( flashing) Yellow ( solid) Red ( flashing) Red ( solid) Whit e ( flashing) Projector state AC power is off ( without AC plugged in) . Proj ect or is st art ing up. Syst em is operating norm ally. Proj ect or is cooling down. Proj ect or is in st andby m ode. A problem exists with the proj ector that does not cause it to shut down. Exam ples of warnings include: filt er needs changing, one of t he pum ps is dam aged, or a fan is operat ing at full speed due t o over t em perat ure of laser diode ( LD) driver. The end user is t urning off t he proj ect or while it is in a warning st at e. An error with the proj ector exists causing it to shut down. Exam ples of errors include: fan failure, over t em perat ure, wrongly inst alled filt er, or color wheel ( CW) failure. The user is t urning off t he proj ect or while it is in an error st at e. Proj ect or is in a flash ( LAN) updat e st at e. Shutter LED I dent ify t he shut t er LED st at e colors and m eaning. LED Status Off Magent a ( solid) Projector State Proj ect or is on and an im age is displayed. Shut t er is open. Proj ect or is on and t he im age is blank. Shut t er is closed. Inspire Series Installation and Setup Guide 27 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Installation and setup Setting up the projector lens Set up the proj ector lens to adj ust the im age size, focus, and position. Adjusting the zoom and focus Ensur e t hat t he im age r eflect ed fr om t he digit al m icr om ir r or dev ice ( DMD) is par allel and cent er ed with the lens and screen. 1. Display an im age or test pattern that can be used to analyze im age focus and geom etry. 2. Press ZOOM on keypad or rem ot e cont rol. You can also select Menu > Configuration > Lens Settings > Zoom. 3. Use t he up and down arrow keys t o zoom in or out of t he im age. 4. To exit t he m enu, press EXIT. 5. Press FOCUS on keypad or rem ot e cont rol. You can also select Menu > Configuration > Lens Settings > Focus. 6. Use t he up and down arrow keys t o adj ust t he focus of t he im age. 7. To exit t he m enu, press EXIT. 8. To refine your adj ust s, repeat st eps 2 t o 7. Adjusting lens position Shift the lens to the specific position. 1. Display an im age or test pattern that can be used to analyze im age location. 2. Press LENS SHIFT ( up but t on) on keypad or LENS H/LENS V on rem ot e cont rol. You can also select Menu > Configuration > Lens Settings > Lens Shift. 3. Use t he arrow keys t o adj ust t he lens posit ion. For best lens perform ance, keep t he shift values wit hin t he lens offset ranges. For m ore inform ation, refer to Calculating the lens offset on page 32. 4. To exit t he m enu, press EXIT. Resetting the lens to home position Set the lens offset back to the hom e position. 1. Press LENS on keypad or LENS H/LENS V on rem ot e cont rol. You can also select Menu > Configuration > Lens Settings > Lens Calibration. 2. Press ENTER. 3. To st art t he lens calibrat ion, select OK. Inspire Series Installation and Setup Guide 28 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Installation and setup Calculating the lens offset Adj ust t he lens offset ( shift ) t o align t he im age on t he screen wit h half im age size. To ensure opt im al pr oj ect or and lens per for m ance, Chr ist ie r ecom m ends k eeping t he offset ( shift ) v alues within the ranges specified below. · The vert ical im age offset ( shift ) range for t he proj ect or is up t o + / - 110% ( WUXGA) . · The horizont al im age offset ( shift ) range for t he proj ect or is up t o + / - 50% ( HD/ WUXGA) . · The m et hod for calculat ing lens offset com plies wit h indust ry st andards, wit h which t he im age offset is calculat ed by half im age size. For exam ple for vert ical lens offset : · At 0% offset ( or on axis) , t he cent er of t he im age is on t he lens cent er, so half of t he im age appears above and half appears below the lens center. · At + 100% offset , all of t he im age appears above t he lens cent er. The following show t he vert ical and horizont al im age offset s for t he I nspire Series WUXGA proj ectors: · Vert ical im age offset : 0% Lens cent er · WUXGA Vert ical im age offset : + / - 110% Lens cent er 0% 0% + 110% -110% Inspire Series Installation and Setup Guide 29 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. · Horizontal im age offset: + / - 50% -50% + 50% Installation and setup Lens cent er Inspire Series Installation and Setup Guide 30 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Connecting to devices This sect ion covers t he inform at ion on connect ing t he I nspire Series proj ector to a com puter and video equipment. Connecting to a computer Learn what cables/ connect ors can be used t o connect t o various devices. Lapt op 12 3 Audio output 4 7 ZOOM FOCUS 9 Rout er / net work switch 8 65 Ex t er nal display Pow er sock et Lapt op ID Connector name 1 HDMI cable 2 VGA in cable 3 Audio cable 4 Audio cable 5 Power cord ID Connector name 6 RS232 cable 7 USB disk 8 HDMI cable 9 RJ- 45 cable Inspire Series Installation and Setup Guide 31 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Connecting to devices Connecting to video equipment Learn what cable/ connect ors m ay be used t o connect t o various video sources. Rout er / DVD player, set - t op box Audio out put net work swit ch HDTV receiver 3 Rem ot e cont rol 2 4 6 7 Mot orized screen 5 1 ZOOM FOCUS Second proj ector 10 3D glasses 9 8 Pow er socket ID Connector name 1 12V DC j ack 2 Wired rem ote control cable 3 RJ- 45 cable 4 HDMI cable 5 RCA com ponent cable ID Connector name 6 Audio cable 7 Audio cable 8 Power cord 9 3D em itt er cable 10 Mini- DI N cable ( 3- pin) · Aft er connect ing t he proj ect or t o an input device, the proj ector aut om at ically det ects t he input source. You can also select an input source by pressing INPUT. · Due to the difference in applications for each country, the accessories required in som e regions m ay differ from those shown. · The diagram s are for illust rat ive purposes only and do not indicat e t hese accessories are supplied with the projector. Inspire Series Installation and Setup Guide 32 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Configuring communications Define and control how single or m ultiple proj ectors are linked with each other and with controlling d ev ice. Setting network environment Determ ine the com m unication settings such as network setup, serial port inform ation, and so on. Adjusting LAN setting Set up network configuration for wire networking. 1. Select Menu > Configuration > Communications > LAN. 2. Set up the appropriate setting: · MAC Address--Display t he net work MAC address value. · Network Status--Connect or disconnect Net work st at us. · LAN Interface--Choose from RJ- 45 or HDBaseT. · DHCP--Enable or disable t he DHCP t o aut om at ically get I P address, subnet m ask, and so on. · IP Address--Assign t he net work I P address. · Subnet Mask--Assign t he net work subnet m ask. · Default Gateway--Assign t he net work default gat eway. · Primary DNS--Assign t he prim ary DNS. · Secondary DNS--Assign t he secondary DNS. 3. To apply t he LAN set t ings, select Apply. Inspire Series Installation and Setup Guide 33 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Configuring light settings Adjusting WLAN setting Set up network configuration for wireless networking. 1. Select Menu > Configuration > Communications > WLAN. 2. Set up the appropriate setting: · SSID--Display t he SSI D of t he wireless net work. · Enable--Enable or disable t he wireless funct ionalit y. · Start IP--Assign t he st art I P address of t he wireless net work. · End IP--Assign t he end I P address of t he wireless net work. · Subnet Mask--Assign t he subnet m ask of t he wireless. · Default Gateway--Assign t he gat eway of t he wireless. 3. To apply t he WLAN set t ings, select Apply. Adjusting network setting Set up network configuration setting, such as reset back to default. 1. Select Menu > Configuration > Communications > Network. 2. Set up the appropriate network setting: · Projector Name--Display t he nam e of t he proj ect or. User can change t he nam e of t he proj ector by web user interface. · Show Network Message--Enable or disable t o display of t he net work m essage. · Reset to Default--Reset t he net work configurat ion set t ing, including LAN set t ing and · WLAN set t ing, back t o default . 3. To apply t he net work configurat ion, press ENTER. Setting serial port baud rate Select the serial port and baud rate. 1. Select Menu > Configuration > Communications > Serial Port Baud rate. 2. Set up the appropriate baud rate. 3. To confirm t he select ion, press ENTER. Enabling serial port echo Enable or disable t o allow t he CLI com m and pass t hr ough. 1. Select Menu > Configuration > Communications > Serial Port Echo. 2. To swap, press ENTER. Inspire Series Installation and Setup Guide 34 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Configuring light settings Logging on to the web user interface Log on t o t he web user int erface by following t he st eps below. 1. Connect t he proj ect or t o AC and power it on. 2. When network is available, connect the proj ector and com puter to the sam e network. a. To check t he proj ect or address in a wired net work, select Menu > Configuration > Communications > LAN > IP Address. b. To check t he proj ect or address in a wireless net work, select Menu > Configuration > Communications > WLAN > Default Gateway. 3. I f net work is unavailable, connect t he proj ect or t o t he com put er wit h an RJ45 cable. a. Set t he Default Gat eway and Subnet Mask of t he com put er t o m at ch t he proj ect or. b. Set the I P address of the com puter to m atch the first three num bers of the proj ector. For exam ple, if t he proj ect or I P address is 192.168.000.100, set t he com put er I P address to 192.168.000.xxx, where xxx is not 100. 4. Open a web browser and t ype t he proj ect or address in t he browser address bar. 5. I n t he Usernam e field, t ype t he usernam e. The default usernam e is adm in. 6. I n t he Password field, t ype t he password. The default password is proj ect or serial num ber. 7. Click Login. Using the web interface To cont rol t he proj ect or t hrough t he web int erface, do t he following: 1. Start up the web browser on your com puter or m obile devices. 2. Ent er t he I P address set on t he proj ect or int o t he URL of t he web browser. 3. Ent er t he user nam e and password t o login. Aft er a successful login, you can cont rol t he proj ector over the web interface. Using the RS-232C interface To cont r ol t he pr oj ect or t hr ough t he RS- 232C int er face, do t he follow ing: 1. Connect your com put er and t he proj ect or direct ly using t he RS- 232 cable. 2. Set t he sam e baud rat e in bot h your com put er and proj ect or. Use com m ands t o cont rol t he proj ector. Inspire Series Installation and Setup Guide 35 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Configuring light settings Re-connecting the network Aft er t he net w or k is disconnect ed and t im eout v ia RJ- 4 5/ HDBaseT/ Wifi, t he br ow ser w ill r efr esh t he page aut om at ically and show " HTTP404 ( Not Found) " er r or m essage. I f user wants to re- control the proj ector, user m ust login in the control page with account and password again. Inspire Series Installation and Setup Guide 36 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Signal connectivity specifications I dentify the signal connectivity specifications for the I nspire Series proj ector. The list of for m at s list ed below ar e not ex haust iv e and ot her for m at s m ay be suppor t ed. For m or e infor m at ion, cont act Chr ist ie Technical Suppor t . VGA video formats I dent ify t he video form at s for t he VGA input . Signal Type Signal Format PC VGA Resolution 640 x 350 640 x 400 640 x 480 SVGA 720 x 400 800 x 600 XGA 832 x 624 848 x 480 1024 x 768 Aspect Ratio V Sync (Hz) RGB YPbPr 85 V X 16: 10 85 V X 1.33 4: 3 60 V X 72 V X 75 V X 85 V X 1.8 9: 5 70 V X 85 V X 1.33 4: 3 60 V X 72 V X 75 V X 85 V X 75 V X 60 V X 1.33 4: 3 60 V X 70 V X Inspire Series Installation and Setup Guide 37 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Signal connectivity specifications Signal Type Signal Format PC XGA SXGA WXGA SXGA WXGA SXGA+ WXGA+ WXGA+ + UXGA WSXGA+ WUXGA RB TV SDTV ( 480i) SDTV ( 576i) EDTV ( 480p) EDTV ( 576p) Resolution Aspect Ratio V Sync (Hz) RGB YPbPr 1024 x 768 1.33 4: 3 75 V X 85 V X 1152 x 864 75 V X 1152 x 870 1.32 75 V X 1280 x 768 1.67 5: 3 60 V X 75 V X 85 V X 1280 x 800 1.6 16: 10 60 V X 75 V X 85 V X 1280 x 960 1.33 4: 3 60 V X 85 V X 1280 x 1024 1.25 5: 4 60 V X 75 V X 85 V X 1360 x 768 1.78 16: 9 60 V X 1366 x 768 V X 1400 x 1050 1.33 4: 3 V X 1440 x 900 1.6 16: 10 60 V X 75 V X 1600 x 900 1.78 16: 9 60 V X 1600 x 1200 1.33 4: 3 50 V X 60 V X 1680 x 1050 1.6 16: 10 V X 1920 x 1200RB 50 V X 60 V X 720 x 480 1.5 3: 2 59.94 V V 60 V V 720 x 576 1.25 5: 4 50 V V 720 x 480 1.5 3: 2 59.94 VV 60 V V 720 x 576 1.25 5: 4 50 V V Inspire Series Installation and Setup Guide 38 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Signal connectivity specifications Signal Type Signal Format TV HDTV ( 1080i) Resolution 1920 x 1080 HDTV ( 720p) 1280 x 720 HDTV ( 1080p) 1920 x 1080 ( V) : Video form at is supported. ( X) : Video form at is Not supported. Aspect Ratio V Sync (Hz) RGB YPbPr 1.78 16: 9 50 V V 59.94 V V 60 V V 50 V V 59.94 V V 60 V V 23.98 V V 24 V V 25 V V 29.97 V V 30 V V 50 V V 59.94 V V 60 V V Inspire Series Installation and Setup Guide 39 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Signal connectivity specifications HDMI video formats I dent ify t he video form at s for t he HDMI input . Signal Type Signal Format PC VGA SVGA XGA SXGA WXGA Resolution 640 x 350 640 x 400 640 x 480 720 x 400 800 x 600 832 x 624 848 x 480 1024 x 768 1152 x 864 1152 x 870 1280 x 768 1280 x 800 Aspect Ratio V Sync (Hz) 85 16: 10 85 1.33 4:3 60 72 75 85 1.8 9:5 70 85 1.33 4:3 60 72 75 85 120 75 60 1.33 4:3 60 70 75 85 120 75 1.32 75 1.67 5:3 60 75 85 1.6 16: 10 60 75 85 120 RGB YCbCr 4:4:4 YCbCr 4:2:2 8 bit 10 bit 12 bit 8 bit 10 bit 12 bit 8 bit V V V V V V V V V V V V V V V V V V V V V VV V V V V V VV V V V V V VV V V V V V V V V V V V V VV V V V V V V V V V V V V VV V V V V V VV V V V V V VV V V V V V VV V V V V V V V V V V V V V V V V V V V V V V V V V V VV V V V V V VV V V V V V VV V V V V V VV V V V V V V V V V V V V V V V V V V V V V V V V V V VV V V V V V VV V V V V V V V V V V V V VV V V V V V VV V V V V V VV V V V V V Inspire Series Installation and Setup Guide 40 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Signal connectivity specifications Signal Type PC TV Signal Format Resolution Aspect Ratio V Sync (Hz) RGB YCbCr 4:4:4 YCbCr 4:2:2 8 bit 10 bit 12 bit 8 bit 10 bit 12 bit 8 bit SXGA 1280 x 960 1.33 4:3 60 V V V V V V V 85 VV V V V V V 1280 x 1024 1.25 5:4 60 V V V V V V V 75 VV V V V V V 85 VV V V V V V WXGA 1360 x 768 1.78 16: 9 60 V V V V V V V 1366 x 768 V V V V V V V SXGA+ 1400 x 1050 1.33 4: 3 V V V V V V V WXGA+ 1440 x 900 1.6 16: 10 60 V V V V V V V 75 VV V V V V V 85 VV V V V V V WXGA+ + 1600 x 900 1.78 16: 9 60 V V V V V V V UXGA 1600 x 1200 1.33 4:3 50 V V V V V V V 60 VV V V V V V WSXGA+ 1680 x 1050 1.6 16: 10 V V V V V V V WUXGA RB 1920 x 1200RB 50 V V V V V V V 60 VV V V V V V SDTV ( 480i) 720 x 480 1.5 3:2 59.94 V V V V V V V 60 VV V V V V V SDTV ( 576i) 720 x 576 1.25 5:4 50 V V V V V V V EDTV ( 480p) 720 x 480 1.5 3:2 59.94 V V V V V V V 60 VV V V V V V EDTV ( 576p) 720 x 576 1.25 5:4 50 V V V V V V V HDTV ( 1080i) 1920 x 1080 1.78 16: 9 50 V V V V V V V 59.94 V V V V V V V 60 VV V V V V V HDTV (720p) 1280 x 720 50 V V V V V V V 59.94 V V V V V V V 60 VV V V V V V 120 V V V V V V V HDTV (1080p) 1920 x 1080 23.98 V V V V V V V 24 VV V V V V V 25 VV V V V V V 29.97 V V V V V V V Inspire Series Installation and Setup Guide 41 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Signal connectivity specifications Signal Type Signal Format Resolution TV HDTV 1920 x 1080 (1080p) Man d at or y 3D Fram e Pa ck i n g (1080p) Fram e Pa ck i n g (720p) 1280 x 720 Side by Side 1920 x 1080 ( 1080i) Top and Bot t om (720p) 1280 x 720 Top and Bot t om (1080p) 1920 x 1080 Fram e Seq u en t ial 3D SVGA XGA HDTV 800 x 600 1024 x 768 1280 x 720 WXGA 1280 x 800 1080p 1920 x 1080 WUXGA 1920 x 1200 4K( * ) 3840 x 2160 3840 x 2160 4096 x 2160 4096 x 2160 SMPTE Aspect Ratio V Sync (Hz) RGB YCbCr 4:4:4 YCbCr 4:2:2 8 bit 10 bit 12 bit 8 bit 10 bit 12 bit 8 bit 1.78 16: 9 30 V V V V V V V 50 VV V V V V V 59.94 V V V V V V V 60 VV V V V V V 23.98 V V V V V V V 24 VV V V V V V 50 V V V V V V V 59.94 V V V V V V V 60 VV V V V V V 50 V V V V V V V 59.94 V V V V V V V 60 VV V V V V V 50 V V V V V V V 59.94 V V V V V V V 60 VV V V V V V 23.98 V V V V V V V 24 VV V V V V V 1.33 4:3 120 V V V V V V V V V V V V V V 1.78 16: 9 V V V V V V V 1.60 V V V V V V V 1.78 60 V V V V V V V 1.6 16: 10 V V V V V V V 1.78 16: 9 24 V V V V V V V 25 VV V V V V V 30 VV V V V V V 50 VX X V X X V 60 VX X V X X V 1.90 24 V V V V V V V 25 VV V V V V V 30 VV V V V V V 50 VX X V X X V 60 VX X V X X V Inspire Series Installation and Setup Guide 42 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. ( V) : Video form at is supported. ( X) : Video form at is Not supported. · 4K is not support ed if t he source is HDMI 2. Signal connectivity specifications HDBaseT video formats I dentify the video form ats for the HDBaseT input. Signal Type Signal Format PC VGA SVGA XGA SXGA Resolution 640 x 350 640 x 400 640 x 480 720 x 400 800 x 600 832 x 624 848 x 480 1024 x 768 1152 x 864 1152 x 870 Aspect Ratio V Sync (Hz) 85 16: 10 85 1.33 4:3 60 72 75 85 1.8 9:5 70 85 1.33 4:3 60 72 75 85 120 75 60 1.33 4:3 60 70 75 85 120 75 1.32 75 RGB YCbCr 4:4:4 YCbCr 4:2:2 8 bit 10 bit 12 bit 8 bit 10 bit 12 bit 8 bit V V V V V V V V V V V V V V V V V V V V V VV V V V V V VV V V V V V VV V V V V V V V V V V V V VV V V V V V V V V V V V V VV V V V V V VV V V V V V VV V V V V V VV V V V V V V V V V V V V V V V V V V V V V V V V V V VV V V V V V VV V V V V V VV V V V V V VV V V V V V V V V V V V V V V V V V V V Inspire Series Installation and Setup Guide 43 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Signal connectivity specifications Signal Type PC TV Signal Format Resolution Aspect Ratio V Sync (Hz) RGB YCbCr 4:4:4 YCbCr 4:2:2 8 bit 10 bit 12 bit 8 bit 10 bit 12 bit 8 bit WXGA 1280 x 768 1.67 5:3 60 V V V V V V V 75 VV V V V V V 85 VV V V V V V 1280 x 800 1.6 16: 10 60 V V V V V V V 75 VV V V V V V 85 VV V V V V V 120 V V V V V V V SXGA 1280 x 960 1.33 4:3 60 V V V V V V V 85 VV V V V V V 1280 x 1024 1.25 5:4 60 V V V V V V V 75 VV V V V V V 85 VV V V V X V WXGA 1360 x 768 1.78 16: 9 60 V V V V V V V 1366 x 768 V V V V V V V SXGA+ 1400 x 1050 1.33 4: 3 V V V V V V V WXGA+ 1440 x 900 1.6 16: 10 60 V V V V V V V 75 VV V V V V V 85 VV V V V V V WXGA+ + 1600 x 900 1.78 16: 9 60 S V V V V V V UXGA 1600 x 1200 1.33 4:3 50 V V V V V V V 60 VV V V V X V WSXGA+ 1680 x 1050 1.6 16: 10 V V V V V V V WUXGA RB 1920 x 1200RB 50 V V V V V V V 60 VV V V V X V SDTV ( 480i) 720 x 480 1.5 3:2 59.94 V V V V V V V 60 VV V V V V V SDTV ( 576i) 720 x 576 1.25 5:4 50 V V V V V V V EDTV ( 480p) 720 x 480 1.5 3:2 59.94 V V V V V V V 60 VV V V V V V EDTV ( 576p) 720 x 576 1.25 5:4 50 V V V V V V V HDTV ( 1080i) 1920 x 1080 1.78 16: 9 50 V V V V V V V 59.94 V V V V V V V 60 VV V V V V V Inspire Series Installation and Setup Guide 44 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Signal connectivity specifications Signal Type Signal Format TV HDTV (720p) Resolution 1280 x 720 HDTV (1080p) 1920 x 1080 Man d at or y 3D Fram e Pa ck i n g (1080p) Fram e Pa ck i n g (720p) 1920 x 1080 1280 x 720 Side by Side 1920 x 1080 ( 1080i) Top and Bot t om (720p) Top and Bot t om (1080p) Fram e Seq u en t ial 3D SVGA XGA HDTV WXGA 1080p WUXGA 1280 x 720 1920 x 1080 800 x 600 1024 x 768 1280 x 720 1280 x 800 1920 x 1080 1920 x 1200 Aspect Ratio V Sync (Hz) RGB YCbCr 4:4:4 YCbCr 4:2:2 8 bit 10 bit 12 bit 8 bit 10 bit 12 bit 8 bit 1.78 16: 9 50 V V V V V V V 59.94 V V V V V V V 60 VV V V V V V 120 V V V V V V V 23.98 V V V V V V V 24 VV V V V V V 25 VV V V V V V 29.97 V V V V V V V 30 VV V V V V V 50 VV V V V V V 59.94 V V V V V V V 60 VV V V V V V 23.98 V V V V V V V 24 VV V V V V V 50 V V V V V V V 59.94 V V V V V V V 60 VV V V V V V 50 V V V V V V V 59.94 V V V V V V V 60 VV V V V V V 50 V V V V V V V 59.94 V V V V V V V 60 VV V V V V V 23.98 V V V V V V V 24 VV V V V V V 1.33 4:3 120 V V V V V V V V V V V V V V 1.78 16: 9 V V V V V V V 1.60 V V V V V V V 1.78 60 V V V V V V V 1.6 16: 10 V V V V V V V Inspire Series Installation and Setup Guide 45 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Signal connectivity specifications Picture-in-picture/picture-by-picture (PIP/PBP) compatibility The follow ing t able det ails t he pict ur e- in- pict ur e/ pict ur e- by - pict ur e ( PI P/ PBP) com pat ibilit y . PIP/PBP VGA Sub Source VGA HDMI 2 HDMI 1.4 HDMI 1 HDMI 1.4 HDMI 2.0 HDBaseT HDMI2 HDMI 1.4 HDMI1 HDBaseT HDMI 1.4 HDMI 2.0 · Dot ( ) : PI P/ PBP com binat ions are enabled. Inspire Series Installation and Setup Guide 46 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Regulatory This product conform s t o t he following regulat ions relat ed t o product safet y, environm ent al r equir em ent s and elect r om agnet ic com pat ibilit y ( EMC) . Safety · CAN/ CSA C22.2 No. 60950- 1- 07 I nform at ion Technology Equipm ent Safet y Part 1: General Requirem ent s · ANSI / UL 60950- 1- 2014 I nform at ion Technology Equipm ent Safet y Part 1: General Requirem ent s · I EC/ EN 60950- 1 I nform at ion Technology Equipm ent Safet y Part 1: General Requirem ent s Laser safety · I EC 60825- 1 Safet y of Laser Product s Part 1: Equipm ent Classificat ion and Requirem ent s · I EC/ EN 62471- 5 - Phot obiological safet y of lam ps and lam p syst em s Part 5: I m age proj ect ors · FDA CDRH 21CFR 1040 - Perform ance St andards For Light - Em it t ing Product s Electro-magnetic compatibility Emissions · FCC CFR47, Part 15, Subpart B, Class A - Unint ent ional Radiat ors · CAN I CES- 3 ( A/ B) / NMB- 3 ( A) - I nform at ion Technology Equipm ent ( I ncluding Digit al Ap p ar at u s) · CI SPR 32: 2014/ EN 55032: 2014, Class A - I nform at ion Technology Equipm ent · I EC 61000- 3- 2/ EN61000- 3- 2 - Lim it s for Harm onic Current Em issions · I EC 61000- 3- 3/ EN61000- 3- 3 - Lim it at ions of Volt age Changes, Volt age Fluct uat ions, and Flicker Immunity · CI SPR 24/ EN55024 EMC Requirem ent s - I nform at ion Technology Equipm ent Inspire Series Installation and Setup Guide 47 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Regulatory Environmental · EU Direct ive ( 2011/ 65/ EU) on t he rest rict ion of t he uses of cert ain hazardous subst ances ( RoHS) in elect rical and elect ronic equipm ent and t he applicable official am endm ent ( s) · EU Direct ive ( 2012/ 19/ EU) on wast e and elect rical and elect ronic equipm ent ( WEEE) and t he applicable official am endm ent(s) · Regulat ion ( EC) No 1907/ 2006 concerning t he Regist rat ion, Evaluat ion, Aut horizat ion and Rest rict ion of Chem icals ( REACH) and t he applicable official am endm ent ( s) · China Minist ry of I nform at ion I ndust ry Order No.39 ( 02/ 2006) on t he cont rol of pollut ion caused by elect ronic inform at ion product s, hazardous subst ances concent rat ion lim it s ( SJ/ T11363- 2006) , and t he applicable product m arking requirem ent ( SJ/ T11364- 2006) Inspire Series Installation and Setup Guide 48 020-001933-01 Rev. 1 (10-2021) Copyright ©2021 Christie Digital Systems USA Inc. All rights reserved. Corporate of¿ces Christie Digital Systems USA, Inc. Cypress ph: 714 236 8610 Christie Digital Systems Canada Inc. Kitchener ph: 519 744 8005 Mexico ph: +52 55 4744 1790 United States (Arizona) ph: 602 943 5700 United States (New York) ph: 646 779 2014 For the most current technical documentation, visit www.christiedigital.com.