Instruction Manual for KENT models including: Prime Star-B RO Water Purifiers, Star-B RO Water Purifiers, RO Water Purifiers, Water Purifiers, Purifiers
7 giorni fa — The maximum distance between the water source and the purifier should not be more than 3 meters. Make sure that the temperature.
OVERHEAD WATER TANK
TANK WATER
PURE WATER
REJECTED WATER
Avoid exposure to direct sunlight and installation in damp areas.
2YHUKHDG ZDWHUWDQN
5HMHFW:DWHU
The rejected water can be re-circulated to overhead tank for Zero Water Wastage.
Make sure that the temperature of the water entering the purifier is within 10 C - 40 C.
0 :DWHU6RXUFH
:DWHULQ
The maximum distance between the water source and the purifier should not be more than 3 meters.
Avoid sharp bends in the pipe. Do not bend or block the reject water pipe.
In case of not using the purifier for more than two days, kindly switch off the power supply and drain the storage tank.
Do not confine the purifier in a cabinet.
To keep the storage tank clean, it should be drained once every 15 days.
Use genuine KENT spares for optimum performance.
Do not try to service the purifier on your own. Instead, call a service technician for help.
Installation Procedure: Step-1
Wall Hanging Diagram
Step-2
Figure 1.
Figure 2.
Figure 3.
Figure 4.
Step-3
Step-4 Step-5
Adobe PDF library 17.00