REVOPOINT POP 2 3D Infrared Light Scanner User Guide

User Guide for REVOPOINT models including: POP 2, POP 2 3D Infrared Light Scanner, 3D Infrared Light Scanner, Infrared Light Scanner, Light Scanner, Scanner

POP 2 Quick Start Guide

POP 2 Quick Start Guide V4.0

Best 3D Scanning Software - Revo Scan 5

POP 2 3D SCANNER - Guick Start Guide

POP 2 3D SCANNER

File Info : application/pdf, 20 Pages, 844.24KB

POP 2 Quick Start GuideV4.0-20230809

POP 2 3D SCANNER
Guick Start Guide
V 4.0

Searching for Keywords
Search for keywords such as"windows" to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on macOS to begin a search.
Navigating to a Topic
View a complete list of topics in the table of contents. Click on a topic to navigate to that section.
Printing this Document
This document supports high-resolution printing.

Table of Content
Read Before Your First Scan ........................................................................2 Software Download .............................................................................2 Scanning Dark, Transparent, or Reflective Objects .........................2 Scanning Objects with Plain Surfaces ...............................................3 Color Scanning .....................................................................................3
About the Scanner ........................................................................................4 What's in the Box?.........................................................................................5 POP 2 on a Windows or Mac Device...........................................................6
System Requirements .........................................................................6 Connection Methods ...........................................................................6 Connect the POP 2 to a PC Via USB ...................................................6 Connect the POP 2 to a PC Via Wi-Fi..................................................8 POP 2 on Smartphones................................................................................9 System Requirements .........................................................................9 Connection Methods ...........................................................................9 Connect the POP 2 to an Android Phone via USB .........................10 Connect the POP 2 to a Phone Via Wi-Fi .........................................11 Appendix ......................................................................................................13 Specifications ...................................................................................... 13 LED Indicators ....................................................................................14 Update the Firmware.........................................................................14 Scanner Calibration ...........................................................................14 Safety Maintenance Instructions .....................................................15 Troubleshooting .................................................................................16 Customer Service ...............................................................................17
©2023 REVOPOINT 3D ALL RIGHTS RESERVED 1

POP 2 Quick Start Guide
Read Before Your First Scan
Software Download
To use your POP 2 3D Scanner, you must download the Revo Scan software. It can be found on Revopoint's website https://www.revopoint3d.com/download/ for PC users, and for smartphones, it can also be found by searching for "Revo Scan" in the Google Play or Apple App Store.

For the detailed functions of Revo Scan, please refer to the how-to-use guide in Revo Scan.

Scanning Dark, Transparent, or Reflective Objects

Like most 3D scanners, the POP 2 will struggle to scan transparent,

reflective, or black objects without first treating the object's surface

with scanning spray, baby powder, or dry shampoo. For example, you

can cover a transparent or dark object with a scanning spray or dust it

with talcum powder.

Hard-to-scan Surfaces

Surface Features

Possible Solutions

Black or very dark objects

Apply scanning spray or fine powder materials

Shiny or reflective objects

Apply scanning spray or fine powder materials

Metal or electroplated

Apply scanning spray or fine powder

surfaces

materials

Transparent objects

Apply scanning spray or fine powder materials

POP 2 Quick Start Guide
Scanning Objects with Plain Surfaces
Scanning objects with simple geometric features, like a football or wine bottle, requires using Marker stickers or marker points and scanning in Marker Mode. 1. Place markers at random distributions on the surface of objects, and it is recommended to place them at a distance of 2~4 cm. Refer to the image below:
2. Place the Marker stickers on the objects' surface irregularly and ensure that there are at least 5 Marker stickers in the frame for the entire scan, or the scanner will lose track. 3. Alternatively, reference objects (these are any objects with distinct features that can be easily tracked) can be used. Place 1 to 3 reference objects around the item you are scanning for the 3D scanner to track. If doing this, you can use the scanner in Feature tracking mode for the scan.
Color Scanning
If you want to accurately capture an object's color during a scan, please ensure that the object is evenly lit with soft light and that there are no dark or hard shadows.
©2023 REVOPOINT 3D ALL RIGHTS RESERVED 3

POP 2 Quick Start Guide
About the Scanner
The newly developed POP 2 3D scanner has gathered functions of a handheld 3D scanner and a desktop 3D scanner, bringing together the company's latest scientific research results. It adopts self-developed 3D camera hardware technology and high-speed intelligent chip, which contributes to a higher performance and directly outputs accurate depth information of an object.
The core hardware of POP 2 applies the principle of binocular & Microstructured light, and with the help of the proprietary micro projecting chip, POP 2 ensures fast acquiring high-accuracy (up to 0.05mm) 3D point cloud data. And it supports texture scanning to directly generate vivid 3D models for color 3D printing. As of intelligent algorithms, POP 2's built-in high-performance 3D calculation chip can effectively ensure smoothly scanning without stalling even if it is used with an ordinary computer.

1. Depth Camera 2. Projector 3. RGB Camera 4. Depth Camera

5. Micro-B USB Port 6. LED Indicator 7. Start/Pause Scan Button 8. Quick Setup Board

What's in the Box?

POP 2 Quick Start Guide

1. POP 2 3D Scanner 2. USB Cable(Micro B Type A) 3. Phone Holder 4. USB Cable(Micro B Type C)

5. 2-in-1 Mobile Cable 6. Tripod 7. Gifts (Markers, Glue Tack, Black Sheet)

Note: The list above concludes all in Standard Package. Refer to sales page for the Premium Package.

POP 2 Quick Start Guide
POP 2 on a Windows or Mac Device
Both Windows and macOS computers are compatible.
System Requirements
Windows: Win 8/10/11 (64-bit) Windows 7 is not supported. Memory: 8GB Processor: Intel Core i5 or better

Mac with Intel × 86 chip: mac OS 10.15 and models after Mac with Apple M1 chip: mac OS 11.0 and models after
Memory: 8GB

* Minimum PC Display Screen Resolution: 1344×768 (1920×1080 is recommended).

Connection Methods

USB Mode Wi-Fi Mode

Windows

macOS

Connect the POP 2 to a PC Via USB
Step 1: Screw the Quick Mount Kit onto the Tripod.
Step 2: Clip the POP 2 to the top.

POP 2 Quick Start Guide
Step 3: Connect the Micro-B end of the cable to the back of your POP 2. Step 4: Plug the Type-A into your computer.
Step 5: Open Revo Scan on your computer. Note: 1) Connect the POP 2 to a USB 3.0 port or above, as USB 2.0 will not supply sufficient operating power. Ensure your USB 3.0 port is not damaged or worn out. 2) If there is no Type-A port on your laptop, please find the other cable (Micro B -Type C) to connect your PC.
©2023 REVOPOINT 3D ALL RIGHTS RESERVED 7

POP 2 Quick Start Guide
Windows or macOS
Connect the POP 2 to a PC Via Wi-Fi
Step 1: Power the POP 2 on with a power bank or an AC adapter.
(Note: Do not plug it into your PC, or it will be in USB mode by default.)
Step 2: Connect the PC to the POP 2. 1) Go to your Wi-Fi setting, search for a network called POP2-XXXXXX and connect. (No password is required.) 2) Wait a few seconds for the scanner to be connected.
8 ©2023 REVOPOINT 3D ALL RIGHTS RESERVED

POP 2 Quick Start Guide

Step 3: Open Revo Scan on your computer.

POP 2 on Smartphones

Android devices can connect via either USB or Wi-Fi. However, iOS devices only support Wi-Fi mode.

System Requirements

Android: Android 9.0 Harmony OS is supported. RAM: 6GB
iPhone: iPhone 8 Plus or models after iPad: 6th generation iPad or models after System Version: iOS 13.0

Connection Methods

USB Mode Wi-Fi Mode

Android

iOS/iPadOS ×

POP 2 Quick Start Guide
Connect the POP 2 to an Android Phone via USB
Step 1: Screw the Phone Holder onto the Power Bank. Step 2: Clip the POP 2 to the top of the Phone Holder. (Note: The following power bank handle is included in POP 2 Premium package, if you bought a Standard Package, please prepare a power bank yourself to power the scanner.)
Step 3: Pull open the Phone Holder's clamps and fit your smartphone. Step 4: Connect the Micro-B end of the 2-in-1 Mobile Cable to the POP 2's port, Type-A to the Power Bank, and Type-C to an Android smartphone.
10 ©2023 REVOPOINT 3D ALL RIGHTS RESERVED

POP 2 Quick Start Guide
Connect the POP 2 to a Phone Via Wi-Fi
Both Android and iOS Phones are compatible. Step 1: Power the POP 2 on via the Power Bank Handle or a Socket. (Note: The following power bank handle is included in POP 2 Premium package, if you bought a Standard Package, please prepare a power bank yourself to power the scanner.)
Step 2: Connect the Smartphone to the POP 2. 1) Go to your Wi-Fi setting on your smartphone, search for a network called POP 2-XXXXXX and connect. (No password is required.) 2) Wait a few seconds for the scanner to be connected.
©2023 REVOPOINT 3D ALL RIGHTS RESERVED 11

Appendix

POP 2 Quick Start Guide

Specifications

Product Name Technology Single-frame Precision Single-frame Accuracy Single Capture Range

POP 2 3D Scanner Dual Camera Infrared Light Up to 0.05mm Up to 0.1mm 210mm x 130mm

Working Distance Minimum Scan Volume Scanning Speed Light Source Alignment Color Scanning Output Formats Point Distance/Resolution
Special Object Scanning
Scanning Environment Outdoor Scanning Scanner Weight Scanner Dimensions

150mm - 400mm
20mm x 20mm x 20mm
Up to 10fps
Class 1 Infrared Light Feature, Marker Yes PLY, OBJ, and STL 0.15mm Use scanning spray for transparent, dark, or highly reflective objects. Indoors and Outdoors The POP 2 cannot scan objects well in direct bright sunlight. 195g 154.6mm x 38.2mm x 25.6mm

POP 2 Quick Start Guide 3D Printing Compatible
Compatible OS
PC Display Screen Resolution Connection Modes

Yes Windows 10/11 (64-bit), Android, iOS, macOS >1344x768 (1920×1080 is recommended)
USB 3.0 or Wi-Fi

Hardware Button

Start/Pause Scan

Note: 1. Accuracy was acquired in a controlled lab environment. Actual results might vary, subject to the operation environment. 2. Class 1 Laser: Avoid direct eye exposure for extended periods! Refer to Standards for Class 1 Lasers for details.

LED Indicators

Update the Firmware
When you connect your POP 2 to Revo Scan, a pop-up will notify you of any firmware updates. If you want to update your firmware, follow the install wizard's prompts and ensure that your POP 2 has a stable power supply.
Scanner Calibration
Your POP 2 3D Scanner was calibrated in the factory and only needs to be recalibrated after a year of use or if the scanned results do not match the specified accuracy.
14 ©2023 REVOPOINT 3D ALL RIGHTS RESERVED

POP 2 Quick Start Guide
Safety Maintenance Instructions
1. Small parts, such as markers and USB adapters, are dangerous if swallowed. Keep all components out of reach of children and animals to avoid serious injury to them. 2. Store the scanner and all accessories in a cool, dry place away from direct sunlight. 3. Do not allow the scanner to come into contact with or become immersed in water or other liquids. If it gets wet, wipe them dry with a soft, absorbent cloth. Operating a scanner that has fallen in water may cause permanent component damage. 4. Keep the cameras (the two IR cameras, one RGB camera and a projector) clean. Use 95% isopropyl alcohol and a soft cloth to clean them. 5. Handle the scanner with care to avoid hitting the cameras. 6. The operating temperature POP 2 of this product is 0°C to 40°C (32°F to 104°F). 7. Do not take apart the scanner. If there are any problems or questions, contact the Revopoint customer service team at customer@revopoint3d.com.
©2023 REVOPOINT 3D ALL RIGHTS RESERVED 15

POP 2 Quick Start Guide
Troubleshooting
1. What to do if you get a "check internet connection" error when trying to download a firmware update? Check your device's Firewall Settings and confirm Revo Scan is not being blocked or the Firewall is off. Try to open https://revopoint.infly3d.com/ in a web browser. If you can access this website, it means Revopoint's server is working correctly.
2. What to do if my POP 2 turns on but its LED never turns solid green, indicating that it's ready to connect? Connect your POP 2 to a power source, then press the POP 2's Start/Pause scan button ten times to reset the POP 2. If that doesn't resolve the issue, please get in touch with customer support.
3. What to do if the POP 2 always loses tracking when scanning? Try using scanner spray, dry shampoo, or baby powder to lightly coat any shiny or dark surfaces on the object. If the object has plain surfaces, you'll need to place Marker stickers (place them irregularly and ensure that at least five will always be in the frame when you're scanning) and select Marker mode for the scan.
4. What to do if the object you want to scan isn't clear in the preview window? Increase the brightness in Revo Scan till the object looks clearly defined and has as few red and blue patches in the preview window as possible.
5. What to do if your scanned model's surfaces lack detail or the details are smeared? Unfortunately, you'll need to redo the scan, but be careful and ensure you only scan an area once rather than multiple times. Basically, the smaller the number of frames, the better the scan quality. Scanning the same spot twice will only lower the detail.
16 ©2023 REVOPOINT 3D ALL RIGHTS RESERVED

POP 2 Quick Start Guide
6. What to do if you keep running out of memory when scanning? The object you're scanning is too large for your computer or smartphone's amount of RAM. If this happens, pause the scan, fuse the model, and start a new scan from where you had to pause your previous scan. These separate scans can be merged together in Revo Scan V5.0 or you can download Revo Studio on Revopoint Official Website to make a whole model once you've finished scanning the object. 7. What should I do if the firmware upgrade fails and the LED light keeps showing blue? Connect your POP 2 to a power source, then press the Start/Pause button 10 times continuously to restore the scanner to the normal scanning mode.
Customer Service
If you need any assistance with your scanner, please don't hesitate to contact us at customer@revopoint3d.com or drop us a line at +1 (888) 807-3339 or chat with one of our customer service agents online on our website www.revopoint3d.com. click the speech bubble on the bottom right corner of the screen.
©2023 REVOPOINT 3D ALL RIGHTS RESERVED 17

This content is subject to change.
www.revopoint3d.com If you have any questions about this document, Please contact Revopoint by sending a message to support@revopoint3d.com
©2023 REVOPOINT 3D ALL RIGHTS RESERVED

References

Microsoft Word 2019