2Boom BX320 Portable Wireless Speaker

Features

• 2.1 outdoor Passive Bluetooth Speaker with 3 inch subwoofer
• Clear sound and heavy bass, dynamic sound effect
• A2DP Bluetooth for wireless music streaming from Bluetooth-enabled devices
• Secure and simple pairing
• FM radio function
• Line-in function for PC, MID, TV, and other audio devices
• Built-in rechargeable lithium battery (1500mAh)
• Includes a strap for easy portability

Specifications

Horn Size: 2 inch

Subwoofer Size: 3 inch

Horn Output: 3W*2, 4Ω

Subwoofer Output: 5W, 4Ω

Battery Capacity: 1500mAh

Frequency Response: 100Hz-20kHz

Product Diagram

The speaker features the following controls and ports:

• 1. Backward button
• 2. Play/Pause button
• 3. Forward button
• 4. On/Off button
• 5. Aux-in jack
• 6. Charging jack

The speaker also has indicator lights for power and charging.

Bluetooth Operation

1. Turn the power button to 'ON'. The blue LED will twinkle quickly.
2. Activate Bluetooth on your mobile phone and search for the device named '2BOOM - BX320'. Connect to it. The blue LED will stop twinkling upon successful connection.
3. Play music from your mobile phone.
4. Use the 'LAST' or 'NEXT' buttons on the device or your mobile phone to select songs.
5. Press the 'Play/Pause' button on the device or your mobile phone to play or stop music.
6. Adjust volume using the Bluetooth device. Long press 'LAST' or 'NEXT' to adjust volume up or down.

FM Radio Operation

1. In FM radio mode, the provided audio cable acts as an antenna. Insert it for the best FM signal.
2. Turn the power button to 'ON'. Long press the 'Play/Pause' button to switch to FM radio mode.
3. Short press the 'Play/Pause' button to auto-search and store FM channels.
4. Use the 'LAST' or 'NEXT' buttons to change stored FM channels.

AUX-IN Operation

Connect other compatible music devices (MP3/MP4 players, PCs, TVs) using the supplied audio line cable. Connect the device's 'Line Out' to the speaker's 'Aux In'. The speaker will automatically switch to 'AUX' mode when the cable is inserted.

When using an external device, all functions are controlled by the external device, except for the 'Play/Pause' button.

Charging Instructions

1. Power off the unit. Insert the provided charging cable into the unit's charging slot and connect the other end to a PC or a 5V output charger (not included). The red charging indicator will remain lit.
2. Charging time is 2-3 hours. The indicator light will turn off when fully charged.
3. To prolong battery life, do not charge for more than 8 hours.
4. Turn the power button to 'OFF' when not in use to cut off power supply.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure requirements. The device can be used in portable exposure conditions without RF restriction.