tp-link TC73(US) Tapo C225 Pan Tilt AI Home Security Wi-Fi Camera User Manual

User Manual for tp-link models including: TC73 US Tapo C225 Pan Tilt AI Home Security Wi-Fi Camera, TC73 US, Tapo C225 Pan Tilt AI Home Security Wi-Fi Camera, Home Security Wi-Fi Camera, Security Wi-Fi Camera, Wi-Fi Camera, Camera

TC73(US) V2.6 User Guide

Download for TC73 | TP-Link

User guide (PDF)

TP-Link Tapo 2K QHD Pan/Tilt AI Home Security WiFi Camera, Panoramic View, Physical Privacy Mode, Night Vision w/Starlight Sensor, Motion/Sound Detection, Works w/Alexa&Google Home(Tapo C225) : Amazon.ca: Electronics

File Info : application/pdf, 26 Pages, 2.29MB

1910013513 Tapo C225 2.0 UG V1

User Guide
Pan/Tilt AI Home Security Wi-Fi Camera

Contents
About This Guide ·······································································································1 Introduction ·················································································································· 2 Appearance ··················································································································3 Set Up Your Camera·································································································5 Set Up Using Amazon Frustration-Free Setup·········································· 6 Set Up HomeKit······································································································· 10 Mount Your Camera······························································································· 12 Authentication·········································································································· 13

About This Guide

This guide provides a brief introduction to the Pan/Tilt AI Home Security Wi-Fi Camera and the Tapo app, as well as regulatory information.
Please note that features available in Tapo may vary by model and software version. Tapo availability may also vary by region. All images, steps, and descriptions in this guide are only examples and may not reflect your actual Tapo Camera experience.

Conventions
In this guide, the following convention is used:

Convention Description

Blue

Key information appears in blue, including management page text such as menus, items, buttons and so on.

Underline Hyperlinks are in blue and underlined. You can click to redirect to a website.

Note:

Ignoring this type of note might result in a malfunction or damage to the device.

More Info
· Specifications can be found on the product page at https://www.tapo.com. · Our Technical Support and troubleshooting information can be found at https://www.tapo.com/support/. · The setup video can be found at https://www.tp-link.com/support/setup-video/#cloud-cameras.

Introduction
When you are away home, there are always something you care about. This is where the smart camera functions. No matter your child is climbing the kitchen cabinet, or the pet is stealing snacks, the Pan/Tilt AI Home Security Wi-Fi Camera helps you stay with them anytime, anywhere. Receive a notification whenever your camera detects motion and see a video clip of this motion to check everything. · Smart AI Detection and Notification Smart AI identifies people, pets, and vehicles while also recognizing abnormal sounds, notifying users as
needed. · Physical Privacy Mode Maintains privacy with the lens blocked by the housing when physical privacy mode is enabled. · Superior Starlight Vision with Ultra Large Aperture Reveals high-fidelity details in low-light environments with an f1.6 ultra-large aperture. · Customizable Block Zones Set customizable block zones to keep private areas from being monitored. · Customizable Smart Tracking Tracks and follows the subjects you set, keeping it within the camera's field of view. · Discreet Night Vision with 940nm IR LED Enjoy unobtrusive night-time monitoring of your baby or pet with the barely-noticeable, low-intensity
940nm IR LED.
· 2K QHD* + HDR Capture sharper, more revealing images with HDR technology and 1.7× more pixels than 1080p. *Compatible with Alexa and Google Assistant supported displays. User experience is dependent on the connected device's specifications.
· Local* and Cloud** Storage Supported Save recorded videos on the microSD card* (up to 512 GB) or by using Tapo Care cloud storage services. *microSD card needs to be purchased separately. Actual storage capacity depends on the size of the microSD card used. *Subscribe for cloud storage at https://www.tapo.com/tapocare/
· Activity Zones Notifies you when activity is detected in specific zones.
2

Appearance

Front

Back

System LED Microphone
Privacy Mode Button

Micro SD RESET

Lens
Micro SD RESET

microSD

Note: Tilt the camera lens up to find the RESET button and the microSD card slot.

DC Power Connector

Slot & Button Explanation
RESET Button While the camera is on, press and hold the RESET button for at least 5 seconds until the LED blinks red.
microSD Card Slot Insert a microSD card (not included) and initialize it on the Tapo app for local recording.
Privacy Mode Button Press the button to turn Privacy Mode on and off. When Privacy Mode is on, the camera lens is hidden.

Speaker 3

System LED Indication

Solid red
Blinking red and blue Blinking blue quickly Blinking red slowly Solid blue Blinking red quickly

Starting up, video recording or live streaming
Ready for setup
Connecting to Wi-Fi
Connected to Wi-Fi
Connected to the cloud
Camera updating or camera resetting

Set Up Your Camera
Follow the steps below to get started with your new camera.

Step 1. Download Tapo App
Get the Tapo app from the App Store or Google Play, or by scanning the QR code below.

Step 2. Log In
Open the app, and log in with your TP-Link ID. If you don't have an account, create one first.

Step 3. Add Your Camera
Tap the button in the app and search for your model. Follow the app instructions to complete setup.

Set Up Using Amazon Frustration-Free Setup

What is Amazon Frustration-Free Setup?
Amazon Frustration-Free Setup can help connect and set up Tapo smart devices in fewer steps, without having to remember and re-enter your Wi-Fi password on each device. To use this feature, confirm the following: The new Tapo device supports Amazon FFS. The new Tapo device is purchased from Amazon. You have an Amazon FFS enabled Alexa device or router. You have saved your Wi-Fi information to Amazon by using Alexa echo. Your Tapo device and router are on the same network as your Alexa echo.

LED Indications during Amazon Frustration-Free Setup

LED Blinking red and blue Blinking blue Solid blue

Status Ready for setup FFS setup in progress Working properly

If the LED does not turn solid blue after a long time, you can try to add the Tapo device manually. (Press the Reset button on your Tapo device once. Then open the Tapo app, tap the + button on the page, select your device model, and follow the app instructions. )

How to use Amazon Frustration-Free Setup with Tapo devices

1. Open the Amazon Alexa app. Then tap More and select Skills & Games.

2. Enter Tapo in the search bar and choose Tapo.

3. Tap the ENABLE TO USE button.

4. Log in with your TP-Link ID that has bound to your Tapo device, and tap Authorize. After authorized successfully, the message Tapo has been successfully linked will come up.

5. Plug in your Tapo device and the setup will complete automatically in two minutes. For setting up more Tapo devices, just plug in and enjoy! Done! If this device displays on the Home page in the Tapo app, it indicates this device has been successfully associated with your Amazon account and joined your Wi-Fi network automatically. If this device does not display on the Home page in the Tapo app, try setting it up manually. (Tap the + button on the page, select your device model, and then follow the app instructions.)
9

Set Up HomeKit
This is a HomeKit-enabled device. You can set up and easily control your Tapo devices with HomeKit from your iPhone or iPad.

Before You Start: 1. Your iPhone/iPad should be connected to a stable 2.4 GHz Wi-Fi network with internet access. 2. Ensure your iPhone/iPad and Apple home hub (if any) are connected to the same Wi-Fi network. 3. To control this HomeKit-enabled device, the latest iOS or iPadOS version is recommended. 4. HomeKit will be disabled 10 minutes after the Tapo device is powered on. You can power off your Tapo device, then power it on and try again.

Set Up HomeKit Option 1: Set Up in the Home App 1. Find the QR code as below on your Tapo device or in its packaging.

Option 2: Set Up in the Tapo App 1. Open the Tapo app. If you have set up the device, go to Device Settings > Add to Home. 2. Find the QR code as below on your Tapo device or in its packaging.

2. Open the Home app and add the accessory by scanning the HomeKit QR code or entering the provided numeric setup code.
3. Follow the instructions in the Home app to complete setup.

3. Follow the instructions in the Tapo app to complete setup.

To control a Tapo device in the Home app, we must follow Apple guidelines. As a result, some Tapo app features will be disabled.
To know about the disabled features in the Home app, refer to https://www.tp-link.com/support/faq/3653/ or scan the QR code on the right.

Failed to Set Up HomeKit? · Move your iPhone/iPad and the Tapo device closer to the router to get a stronger Wi-Fi signal. · Factory reset the Tapo device and restart your phone. Then try again. · Refer to the FAQ below for detailed instructions: https://www.tp-link.com/support/faq/3390/
11

Mount Your Camera
When you finish adding your camera in the Tapo app, you can set it on a table or shelf. You can also mount it using the camera base. Follow the steps below to install your new camera.

1. Mark Position
Place the mounting template where you want the camera. For wall mounting, drill two holes through two circles.
=6 mm (15/64 in.)

2. Mount Base
Affix the camera base using the screws. For wall mounting, insert two anchors into the holes and use the screws to affix the camera base over the anchors.

3. Secure Camera
Attach the camera on the base and rotate to secure the camera.

Authentication
FCC compliance information statement
Product Name: Pan/Tilt AI Home Security Wi-Fi Camera Model Number: Tapo C225/TC73 Component Name Model I.T.E. Power Supply T120100-2B1 Responsible Party: TP-Link USA Corporation Address: 10 Mauchly, Irvine, CA 92618 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/ TV technician for help.
13

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. "To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter."
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.

FCC compliance information statement Product Name: I.T.E. Power Supply Model Number: T120100-2B1 Responsible Party: TP-Link USA Corporation Address: 10 Mauchly, Irvine, CA 92618 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: sales.usa@tp-link.com

Issue Date: 2023-09-07 14

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2023-09-07
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
OPERATING FREQUENCY (the maximum transmitted power)
2412MHz--2472MHz (20dBm)
15

EU Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU Declaration of Conformity may be found at https://www.tapo.com/en/support/ce/.
RF Exposure Information
This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body. Restricted to indoor use.
16

UKCA Mark UK Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www.tapo.com/support/ukca/.
Korea Warning Statements:
.
17

NCC Notice & BSMI Notice

· · · · · ·

Pan/Tilt AI Home Security Wi-Fi Camera Equipment name

Tapo C225/TC73 Type designation (Type)

Unit
PCB

Lead (Pb)

Restricted substances and its chemical symbols

Mercury
(Hg)

Cadmium
(Cd)

Hexavalent chromium (Cr+6)

Polybrominated biphenyls
(PBB)

Polybrominated diphenyl ethers
(PBDE)

1. 0.1 wt % 0.01 wt % Note 1"Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2. Note 2"" indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3.- Note 3The "-" indicates that the restricted substance corresponds to the exemption.

, .

Safety Information
· Keep the device away from water, fire, humidity or hot environments. · Do not use damaged charger or USB cable to charge the device. · Do not use any other chargers than those recommended. · Do not use the device where wireless devices are not allowed. · Adapter shall be installed near the equipment and shall be easily accessible. · Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don't
hesitate to contact us. · For indoor use only. · Do not disassemble, repair or modify the product. · Do not use the product if the casing has been broken. Danger of electric shock. · Never touch the product with wet hands. · Do not expose to heavy rain or any type of moisture. · Do not place near automatically controlled devices such as fire alarms. Radio waves emitted from this product may cause such devices to
malfunction resulting in an accident. · Observe restrictions on using wireless products in fuel depots, chemical plants or when blasting operations are in progress. · Do not use liquid to clean the product. Only use a dry cloth. · Never put metal objects inside the product. If a metal object enters the product turn off the circuit breaker and contact an authorised electrician. · This product is not intended to be used when providing medical care. Consult the manufacturer of any personal medical devices, such as pacemakers
or hearing aids to determine if they are adequality shielded from external RF (radio frequency) energy. · Do not use this product in health care facilities. Hospitals or health care facilities may be using equipment that could be sensitive to external RF
energy. · Do not use this product near water for example near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. · The product should be kept free from excessive smoke, dust or high temperature and vibration. · This product should not be exposed to direct sunlight · Do not place heavy objects on top of the product.
20

· When you leave the product unused for a long time unplug the product from the power outlet. · This product may interfere with other electronic products such as TV, radios, personal computers, phones or other wireless devices. · Operating Temperature: 0 °C ~ 40°C (32°F ~ 104°F) Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
21

Explanation of the symbols on the product label

Note: The product label is on the bottom of the product and its power supply. Symbols may vary from products.

Symbol

Explanation

Class II equipment

Class II equipment with functional earthing

Alternating current

DC voltage

Polarity of output terminals

Indoor use only

Dangerous voltage

Caution, risk of electric shock

Energy efficiency Marking

Protective earth

Earth

Frame or chassis 22

Symbol

Functional earthing

Explanation

Caution, hot surface Caution Operator's manual

Stand-by

"ON"/"OFF" (push-push)
Fuse
Fuse is used in neutral N RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.
Caution, avoid listening at high volume levels for long periods

Disconnection, all power plugs 23

Symbol m µ

Explanation Switch of mini-gap construction Switch of micro-gap construction (for US version) Switch of micro-gap / micro-disconnection construction (for other versions except US)
Switch without contact gap (Semiconductor switching device)

References

Adobe PDF Library 15.0 Adobe InDesign 15.0 (Windows)