User Manual for Mickaosoun models including: WMF001, WMF001-2, WMF001 Wireless UHF Microphone, Wireless UHF Microphone, UHF Microphone, Microphone
Shenzhen Xing Mao Wei Electronic Co., Ltd. WMF001 2BABK-WMF001 2BABKWMF001 wmf001
Mickaosoun WMF001 WMF001-2 Wireless UHF Microphone User Manual If you have any questions, please feel free to contact us. E-mail: Mickaosoun@outlook.com 1. Product introduction: Product introduction: The wireless microphone adopts UHF frequency band transmission, which has the characteristics of long transmission distance, strong anti-interference ability, short delay time and clear sound quality. Easy to operate. The whole machine has low power consumption and long endurance, which can be widely used in teaching, conference, stage performance and other occasions Attention: Please read all warnings carefully before use, and keep this instruction manual for future use 2. Product features: 1.UHF frequency band wireless transmission, no cable winding, good anti-interference performance, signal sound quality is clear 2.One button to power on/ off, volume control, easy to operate 3.The LED screen display is easy to see and controll4.With Bluetooth receiving function, more extensive application 3. Product description: Microphone 4. How to use: 1. Plug receiver into mic hole of amplifier 2. The receiver signal plug is 6.3mm, and the MIC input hole of some loudspeaker equipment is 3.5mm, which can be used in conjunction with the attached conversion plug Attention: Due to the design of the loudspeaker equipment, most of the "Line in" or "AUX" ports of the loudspeaker equipment are not compatible with the receiver, which is not caused by this product. 3.The receiver of this product can be used independently as a Bluetooth receiver, so that the PA equipment without Bluetooth function has Bluetooth capability. After turning on the receiver, plug it into the MIC jack of the amplifying equipment, search for the Bluetooth name "Mickaosoun" and connect with a smart device such as a mobile phone to send the sound of the smart device to the loudspeaker device (call sounds cannot be sent). on the receiver, plug it into the MIC jack of the amplifying equipment, search for the Bluetooth name "Mickaosoun" and connect with a smart device such as a mobile phone to send the sound of the smart device to the loudspeaker device (call sounds cannot be sent). 5. How to fix problems: 6. Product parameters: 7. Package Contents: 2XMic (CHA, CHB) 1X receiver 2X anti-roll pad 1X 3.5mm adpater 1X charging cable 1X user manual 8.FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.Acrobat Distiller 11.0 (Windows)