Gadnic CONT0012 Bill Counter User Manual
Manual de Usuario - Contadora de billetes
Model: CONT0012
Basic Operation
Automatic to Manual Mode Switch
The machine automatically defaults to an automatic counting mode upon startup. To switch to manual mode, press the "CF" key, then press the "AUTO" key.
Ultraviolet Detection
Press the "CF" key, then press the "UV" key to activate or deactivate ultraviolet detection. When this function is active, the machine will stop if a counterfeit bill is detected. This function is also dependent on appropriate thickness.
Magnetic Detection
Press the "CF" key, then press the "MG" key to activate or deactivate magnetic detection. When this function is active, the machine will stop if a counterfeit bill is detected. This function is also dependent on UV detection and appropriate thickness.
IR Detection
Press the "CF" key, then press the "IR" key to activate or deactivate IR detection. When this function is active, the machine will stop if an anomaly is detected.
Size Detection
Press the "DD" key to activate or deactivate size detection. When this function is active, the size of the first counted bill is memorized. The machine will stop if a bill of a different size is detected.
BATCH Function
The bill counter can group bills into preset quantities. Press the "BATCH" button on the machine to display "10/20/25/50/100". Use the "0-9" keys to configure the batch quantity. Press the "C" key to turn off the Batch function.
SPEED Settings
To select the counting speed, press the "SPEED" key to choose the machine's speed (800/1200/1600/1900 bills/minute).
RESTART Function
Used to initiate a recount operation in certain cases. To resume counting after an error has been cleared, or to clear the displayed count, press to start counting again.
Configuration
IR (Infrared) Sensitivity
IR sensitivity helps detect counterfeit paper and plastic notes with fluorescence. Press and hold the "IR" key for at least 3 seconds until the machine displays "P03". Then, use the numeric keys to adjust the sensitivity (Range 0-9). Press the "RESTART" key to save your changes.
Ultraviolet Sensitivity
Ultraviolet light sensitivity helps detect counterfeit paper and plastic notes with fluorescence. Press and hold the "UV" key for at least 3 seconds until the machine displays "P01". Then, use the numeric keys to adjust the sensitivity (Range 0-9). Press the "RESTART" key to save your changes.
Magnetic Sensitivity
Magnetic sensitivity helps detect counterfeit paper and plastic notes with magnetic components. Press and hold the "MG" key for at least 3 seconds until the machine displays "P02". Then, use the numeric keys to adjust the sensitivity (Range 0-9). Press the "RESTART" key to save your changes.
Error Codes
| Code | Reason |
|---|---|
| A0 | UV |
| A1 | UV |
| b | MG |
| r | IR |
Troubleshooting
| Error Code | Error Type | Cause of Error |
|---|---|---|
| EJ | Jam | A bill is jammed in the machine. |
| Ed | Double bill detected | Abnormal notes mixed in the batch of notes to be counted. |
| EH | Half bill detected | Bills are stuck in the stacker. |
| EC | Chained bill detected | Bills of different sizes mixed. |
| St | Bill out of stacker | Abnormal bills. |
| dd0 | DD bills detected | Bills of different sizes mixed. |
| dd1 | DD bills detected | Abnormal bills. |
| EA3 | Speed sensor problem | Problem with the speed sensor. |
| EAr | Counting sensor problem (correct) | Problem with the correct counting sensor. |
| EAL | Counting sensor problem (left) | Problem with the left counting sensor. |
