User Manual for Fiberhome Telecommunication Technologies Co Ltd models including: SR1021F Wireless Router, SR1021F, Wireless Router, Router
Fiberhome Telecommunication Technologies Co.,Ltd. SR1021F 2AV2N-SR1021F 2AV2NSR1021F sr1021f
NNNNNNNNHb
CODE 128 MN000005602A
To operate the equipment safely and correctly, users should read the following precautions carefully before operating the equipment, and observe strictly during operations.
The protective film should be removed before use. Use the power supply adapter provided in the package only. Using other adapters may cause eqyipment damage or operation failures. Install the equipment in a well ventilated environment without high temperatures or direct sunlight to protect the equipment and its components from overheating, which can result in damage. Avoid moisture, dampness and water damage. Equipment exposed to water cannot work normally and can be extremely hazardous due to shorting. Do not lay this equipment on an unsteady base. If you want to place the equipment at high places or hang it on the wall, please make sure the equipment is firmly secured. Falling down from high places would damage the equipment and its accessories, and warranty will be void. Do not lay a heavy object on the equipment, and avoid violent collision. Use the power supply adapter provided in the package only. Using other adapters may cause equipment damage or operation failures. The electrical load capacity of the socket and cables should meet the equipment's requirement. Power socket overload, broken cables or broken plugs may cause electric shock or fire. Regular check-ups on power supply wires and cables are essential. If any appears damaged, replace it at once. Power off the equipment in the event of lightning storms. Disconnect all cables connected to the equipment such as power cable and network cable to avoid equipment damages caused by lightning stroke. If the equipment is not used for a long period, please shut off the power supply and unplug the power cable. Do not wash the equipment with water. Before cleaning the equipment case, please shut off the power supply and unplug the power cable. Do not touch the wires and cables with a wet hand. Do not use benzene o ethyl alcohol, or gasoline to clean the equipment.
Services
The warranty is void if the product is opened, misused, damaged or modified in any way. Contact you dealer without delay , if
the power cable or the power plug appears damaged; the product has been exposed to rain or moisture; the product has fallen from high places; you fail to use the product normally in strict accordance with the user manual supplied.
2 SR1021F
100-240V~,50/60Hz e
Working temperature: 0 °C to 45°C
SR1021F
125.3*81.8*228.8mm
10.8W
SR1021F
Fi button
Bring the sub-router close to the main routerand by pressing the button "Fi" on both routersPress it on main-router 3-5s until the LED of Fi blinking slow then Press it on the sub-router more than 10s until the LED of Fi blinking fast, the mesh network will be established automatically.
LED Off Power off or the router works abnormally
Red On
Abnormal situation happened (i.e. failed to connect to internet)
Green On The router has been successfully installed
SR1021F
SR1021F
SR1021F
Choose Start->Run from the PC. Enter Ping 192.168.XX.XX ( the Management IP address of the device in the bottom shell label ) in the DOS window. If the web configuration page still cannot be accessedcheck the following configuration.
Adobe PDF library 15.00