RGB LED Bottom Lamp Color Clock

This document provides instructions for setting up and using the RGB LED Bottom Lamp Color Clock, which features 11+ color formats, two sets of alarm clocks, and weekday language settings.

1. Weekday Language, DST, Year, Date, and Time Settings

Press the "SET" button to enter the settings mode.
Set two sets of alarm clocks and time separately using the "+" button.

2. Switch Display Between Date and Temperature

Long press the "+" button for 2 seconds to enter the switch settings.
After selecting, press "SET" to return to the time display.

3. Setting Two Alarms

Long press the "Alarm 1" or "Alarm 2" button on the back for 2 seconds to enter the setting for "Alarm 1" or "Alarm 2" respectively.

4. Setting Alarm Working Day Mode

Select the alarm working day mode by pressing "+" or "-", then press "SET" to confirm.
This setting can be repeated for different alarm working day modes.

5. Alarm Sound and Snooze Functionality

When the alarm clock rings, pressing any button except the "Snooze" button will stop the alarm. The alarm will ring again at the same time the next day.
Pressing the "Snooze" button will temporarily silence the alarm.

6. Time Functionality

Timing range: 00:00:00-99:59:59.
The last timing setting is automatically saved when starting up (with a memory battery).
While the timer is running, you can switch between the timer interface and the display time interface.
When the timer starts a 10-second countdown voice announcement, the screen will automatically switch to the timer interface. This 10-second countdown voice announcement function can be turned on or off via the buttons on the back panel.

7. Countdown Voice Reminder Functions

Press the "Timer" button to enter the timer mode.
Press the "Snooze" button to start/stop the timer.
After pressing the "Timer" button, the time display will return to the normal time display.

8. Ringtone Music Settings and Volume Adjustment

Select ringtone music by pressing the "Music" button on the back.
Press the "Music" button on the back again to select the next ringtone music.
Adjust the volume to different levels using the "Volume Controller" on the back.