DC-TYPE EXAMINATION CERTIFICATE (MODULE B)

Certificate No: MEDB00001BE Revision No: 12

Application of: Directive 2014/90/EU of 23 July 2014 on marine equipment (MED), issued as "Forskrift om Skipsutstyr" by the Norwegian Maritime Authority. This Certificate is issued by DNV AS under the authority of the Government of Norway.

This is to certify:

That the Radar equipment

with type designation(s) FAR-3210, FAR-3210-BB, FAR-3220, FAR-3220-BB, FAR-3310, FAR-3320, FAR-3320W, FAR-3220W-BB, FAR-3330SW, FAR-3230SW-BB, FAR-3230S, FAR-3230S-BB, FAR-3330S, FAR-3230S-SSD, FAR-3230S-SSD-BB, FAR-3330S-SSD, FAR-3220-NXT, FAR-3220-NXT-BB, FAR-3320-NXT

Issued to:

Furuno Electric Co., Ltd.

Nishinomiya, Hyogo Pref. Japan

is found to comply with the requirements in the following Regulations/Standards:

Regulation (EU) 2023/1667.

Item No. MED/4.64 SOLAS 74 as amended, Reg. V/18, 19, X/3, IMO Res. MSC.36(63)-(1994 HSC Code) 13, IMO Res. MSC.97(73)-(2000 HSC Code) 13, IMO Res. A.278 (VIII), A.694(17), MSC.191(79), 192(79), 302(87), IMO MSC.1/Circ.1349, ITU-R M.1177-4 (04/11)

Further details of the equipment and conditions for certification are given overleaf.

This Certificate is valid until 2026-08-29.

Issued at: Høvik on 2023-10-18

DNV local unit: Japan FiS

Approval Engineer: Steinar Kristensen

Notified Body No.: 0575

for DNV AS

Sverre Olav Bergli

Head of Notified Body

A U.S. Coast Guard approval number will be assigned to the equipment when the production module has been completed and will appear on the production module certificate (module D, E or F), as allowed by the "Agreement between the United States of America and the EEA EFTA states on the mutual recognition of Certificates of Conformity for Marine Equipment" signed 17 October 2005, and amended by Decision No 1/2023 dated August 21st, 2023.

The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production-surveillance module (D, E or F) of Annex B of the MED is fully complied with and controlled by a written inspection agreement with a Notified Body. The product liability rests with the manufacturer or his representative in accordance with Directive 2014/90/EU.

This certificate is valid for equipment, which is conform to the approved type. The manufacturer shall inform DNV AS of any changes to the approved equipment. This certificate remains valid unless suspended, withdrawn, recalled, or cancelled.

Should the specified regulations or standards be amended during the validity of this certificate, the product is to be re-approved before being placed on board a vessel to which the amended regulations or standards apply.

LEGAL DISCLAIMER: Unless otherwise stated in the applicable contract with the holder of this document, or following from mandatory law, the liability of DNV AS, its parent companies and their subsidiaries as well as their officers, directors, and employees ("DNV") arising from or in connection with the services rendered for the purpose of the issuance of this document or reliance thereon, whether in contract or in tort (including negligence), shall be limited to direct losses and under any circumstance be limited to 300,000 USD.

Form code: MED 201.NOR

Revision: 2022-12

www.dnv.com

Page 1 of 7