Ninebot eKickScooter E2 II and E2 Plus II

Welcome!

Congratulations on your new Ninebot eKickScooter!

Age and Height Requirements: 14+ years old, minimum height 140 cm.

Safety First: Always wear a helmet, elbow pads, and knee pads when riding your electric scooter!

Package Contents

• 4 mm (5/32) L-shaped hex key x 1
• 5 mm (3/16) L-shaped hex key x 1
• Bolt with washer x 1
• Bolts x 5
• Charger x 1
• Electric scooter

Assembly

Step 1: Align the positioning groove with the positioning bolt, then insert the bolt into the groove and press the handlebar base down.

Step 2: Slide the handlebar and cables into the tube with the headlight facing forward.

Step 3: Tighten the two bolts alternately several times. Ensure the handlebar is securely tightened by trying to move it.

Step 4: Place the scooter on the ground and unfold the kickstand.

Step 5: Tighten the two bolts alternately several times. Ensure the handlebar is securely tightened by trying to move it.

Step 6: Lift the safety button, open the quick-release lever, and fold the support tube. Tighten the bolt with washer at the base. Close the quick-release lever.

Unlocking: Pull and hold the safety button up, then open the quick-release mechanism.

Locking: Press the quick-release lever firmly until the safety button reaches the return mark.

WARNING: Turn off the scooter before assembly! The brake cable should not be twisted around the handlebar base!

Activation

Step 1: Turn on the scooter. Before activation, the scooter will emit a constant "Beep" sound, and its maximum speed will be limited to 10 km/h.

Step 2: Scan the QR code to download the Segway-Mobility app, then register or log in.

Step 3: Tap "Search vehicle" to connect the app to the electric scooter.

Step 4: Follow the instructions to watch the video with safe riding recommendations.

Step 5: Tap to activate the scooter. Once activated, the default speed mode will be "S" mode.

Additional instructions and/or warnings for using the product are also available in the Segway-Mobility app. This information is part of the user materials that should be read and followed before using the product.

APP Mobile App Functions

Please personalize these functions through the Segway Mobility app.

• Starting Speed
• Allow others to connect
• Energy Recovery [1]
• Cruise Mode (*Only for model 051402UU)

[1] Notes on Energy Recovery function:

Introduction: Set the Energy Recovery level in the "Segway Mobility" app: Off/Strong/Weak.

1. By default, the vehicle's Energy Recovery function is set to "Off". Users can activate or deactivate the Energy Recovery function in the "Segway Mobility" app.

2. Once the Energy Recovery function is activated, releasing the throttle while riding will automatically engage this function. The motor will then generate a reverse electromotive force, causing the vehicle to decelerate and creating a noticeable slowing sensation (similar to pulling the brake lever).

The intensity of the Energy Recovery function can be adjusted to "Strong" or "Weak". When set to "Strong", the deceleration is more pronounced.

Safety Tips:

a. Before using the Energy Recovery function while riding, practice in a safe environment until you are familiar with its operation and effects. Please note that this function may provide additional resistance to reduce the scooter's speed when the throttle is released, supplementing the standard friction and braking mechanisms. Therefore, users must control the vehicle properly and maintain good balance for a safe ride.

b. Energy Recovery is intended to assist, not replace, the braking system. When you need to stop or slow down safely, please use the brake by pulling the brake lever.

c. Please exercise caution when using the Energy Recovery function on downhill slopes or under special riding conditions to prevent falls. Releasing the throttle on a downhill slope may still result in acceleration due to gravity and inertia. Due to the acceleration, Energy Recovery will engage simultaneously, providing a braking force that requires careful balance maintenance.

d. The Energy Recovery function is not triggered while the scooter is in cruise control mode. After exiting cruise control, releasing the throttle will initiate Energy Recovery (if already activated in the app), causing a distinct deceleration.

e. Once the Energy Recovery function is activated, it will remain on until manually turned off via the "Segway Mobility" app. The function does not deactivate automatically if the vehicle is turned off or the battery is depleted. The vehicle's dashboard does not display the status of the Energy Recovery function, which can only be checked and adjusted (Off/Strong/Weak) within the app.

f. Please inform any scooter user about the current Energy Recovery settings to ensure they are aware of how the function affects the scooter's performance.

g. If you have any questions regarding this function, please contact technical support.

Charging

Charging Port:

Your electric scooter is fully charged when the LED indicator on the charger changes color from red (charging) to green (fully charged).

• Open the cap covering the charging port.
• Plug in the charger.
• Close the cap covering the charging port.

How to Ride

Step 1: Turn on the scooter.

Step 2: Step onto the footboard with one foot and push off with the other.

Step 3: Decelerate by releasing the throttle and gently applying the brake.

Step 4: Place both feet on the footboard and stand stably. Gently press the throttle for acceleration once your body is balanced. Note: For your safety, the electric motor will not accelerate until the scooter reaches a speed of 3 km/h.

Step 5: For left/right turns, select the left (<-) or right (->) turn signal button. The turn signal will flash continuously. To turn it off, return the switch to the middle position. (*Only for models 051402BB, 051401EE.)

Step 6: To turn, lean your body slightly in the direction of the turn and gently steer with the handlebar.

Step 7: After riding, deploy the kickstand.

Safety Precautions

• Do not ride on public roads, highways, or freeways unless local legislation permits such use!
• Do not use a smartphone or wear headphones while riding the scooter!
• Do not climb or descend stairs, and do not jump over obstacles!
• Do not ride with only one hand or one foot!
• Do not ride the scooter in the rain! Do not ride through puddles or other obstacles!
• Maintain a riding speed of 5-10 km/h when riding over uneven surfaces.
• Do not overtake!
• Protect your head when passing through doorways!
• Do not carry heavy objects on the handlebar!
• Do not carry any passengers!
• Avoid contact with obstacles with the wheels/tires!
• Do not wear high-heeled shoes while riding the scooter!
• Do not touch the electric motor immediately after riding!
• Do not touch the drum brake immediately after riding!
• Do not park outdoors or outside for extended periods!

Folding

Step 1: Slide the safety button up and open the quick-release mechanism.

Step 2: Fold the handlebar base.

Step 3: Align the securing hook with the hanging element.

Carrying

Lift by the handlebar base to carry the scooter.

Unfolding

Step 1: Release the securing hook from the hanging element.

Step 2: Unfold the handlebar base and close the quick-release mechanism. Ensure the safety button reaches the return mark.

Ensure the safety button is in the locked position before you start riding!