O-UVC2 Pro Ozone Generator

Device Description

The O-UVC2 Pro Ozone Generator from the Baseaire series utilizes oxygen from the surrounding air as a molecular compound. The generator draws in ambient air and initiates a discharge procedure, breaking down diatomic oxygen molecules into free radicals. These atomic oxygen particles then recombine with other oxygen molecules to form ozone.

Ozone is a potent oxidant with high reaction potential, making it effective in decomposing destructive airborne substances. The free radicals within ozone molecules react with various substances in the air, even at low concentrations. This oxidative decomposition process helps eliminate odors and break down pollutants, including viruses, bacteria, molds, and allergenic microorganisms found on surfaces like floors, walls, and ceilings.

Once ozone has oxidized other atoms, the ozone molecules convert back into oxygen molecules. Due to their unstable bonds, unoxidized ozone molecules naturally decompose into oxygen over time, leaving no harmful residues. In indoor environments under normal conditions, ozone has a half-life of approximately 30 to 60 minutes, meaning its concentration is halved every hour.

Structure

• 1. Upper shell
• 2. Plastic handle
• 3. Knob
• 4. Gasket
• 5. Fan
• 6. Bottom shell
• 7. Circuit board protective shell
• 8. Circuit board
• 9. Generator

Diagram Description: An exploded view diagram illustrates the internal components of the ozone generator. Numbered parts are visible, including the upper shell, plastic handle, knob, gasket, fan, bottom shell, circuit board protective shell, circuit board, and the main generator unit.

Operation

State Description of Switch

• The default state is OFF. When powered ON, the indicator light remains illuminated, signifying that the ozone generator and fan are active.
• Rotate the knob's arrow to the desired position to set the operating time, ranging from 00:00 to 02:00. During operation, the indicator light will be on, and the ozone generator and fan will run. The knob's arrow will return to OFF to shut down the unit.

Ozone naturally decomposes into oxygen within approximately one hour. If a person remains in the area for extended periods, they may not perceive the strong ozone smell.

Overall Workflow for Odor Neutralization and Cleaning

1. Place the O-UVC2 Pro Ozone Generator in the center of the room.
2. Ensure the equipment and connecting cables are not damaged.
3. Connect the power cable to the device and a power source, observing the technical parameters.
4. Set the timer to the required run time.
5. Turn on the device. The display panel will illuminate, and the cleaning cycle will commence immediately. The O-UVC2 Pro Ozone Generator will automatically shut down once the preset time has elapsed.

Warnings and Treatment Time

⚠️ The risk of ozone causing harm to the human body!

During use, if ozone is smelled outside the designated working area, the machine must be stopped immediately. Ventilate the room thoroughly.

The following table provides general reference values for determining the processing time based on the type of smell and room size:

Mistakes and Shortcomings

The equipment has undergone multiple checks for normal function during the production process. If a fault persists, consult the following list:

⚠️ Electric shock is life-threatening!

Before performing any operation on the device, unplug the power plug from the socket. Do not bypass any electrical safety devices!

To ensure normal and trouble-free operation, the equipment must be cleaned and maintained regularly.

Maintenance

⚠️ Electric shock is life-threatening!

Before performing any operation on the device, unplug the power plug from the socket. Do not bypass any electrical safety devices!

⚠️ Inhalation of ozone can cause injury!

After the equipment stops running, wait for a while to ensure the ozone concentration is lower than the specified value before performing maintenance and cleaning.

Regular maintenance is essential for ensuring the normal and trouble-free operation of the equipment. The type and frequency of maintenance tasks depend on the operating environment and usage patterns. Dust and moisture accumulation can affect function and efficiency. In dusty environments or after fire damage (high humidity), inspection and maintenance should be performed immediately.

Basic Principles for Determining Equipment Operation and Maintenance Intervals:

• Often
• Per hour
• 1-2 times a week
• In an overly dirty environment
• In a humid room

Perform maintenance if one or more of the following signs appear, regardless of operating conditions:

• Increased noise level when the fan is running.
• Severely polluted soft magnetic stickers.
• Dirty electrodes (indicated by a hissing sound).
• Substances produced during ozone production gradually disappear.

House Cleaning

Clean the exterior case with a soft, damp, lint-free cloth. Ensure no moisture enters the enclosure and prevent electrical components from getting wet. Do not use harsh cleaning agents like sprays, solvents, alcohol-based cleaners, or abrasives.

Cleaning Components

Regular maintenance includes checking the condition of the equipment and its accessories, and thoroughly cleaning its components.

Cleaning the Fan

1. Remove the screws on the dust cover.
2. Remove the shell.
3. Disassemble and clean the fan. Check its operation. For light contamination, use a vacuum cleaner or tap water. For serious contamination, clean with a soap solution. Ensure the fan is completely dry before reassembly.

Cleaning the Electrode

The electrode can be cleaned in its built-in state. Inspect for cracks before cleaning. Do not use damaged parts.

Use a dry (lint-free) or damp cloth to clean components. Ensure no fibers remain on the electrode after cleaning. Do not use the device before the electrodes are completely dry.

Installation Requirements

The following requirements must be met when installing the Baseaire O-UVC2 Pro Ozone Generator:

• Use the generator only according to the parameters provided in the "Technical Data" chapter.
• Ensure no obstructions at the air inlet and outlet.
• Place the device in the center of the room for optimal air circulation.
• Do not install near flammable substances or gases.
• Place the device on a dry and vibration-free surface.
• Protect the equipment from splash water.

Transportation and Storage

Incorrect storage or transportation can damage the device. Pay attention to the following information:

Transportation

Before transporting the equipment, observe these regulations:

• Turn off the device.
• Hold the power plug while unplugging the power cord from the outlet.
• If the device was recently in use, wait until the timer period has ended before moving it.
• Do not drag the device by its power cord during transportation to prevent movement and vibration that could damage the electrode.

After transporting the equipment:

• Install the equipment in an upright position.

Storage

When the device is not in use, observe these storage conditions:

• Store the Baseaire O-UVC2 Pro Ozone Generator in a dry place, protected from adverse weather and dust.
• Always disconnect the power supply when the equipment is not in use.

Technical Annex

Electrical Wiring Diagram

Diagram Description: The electrical wiring diagram illustrates the connections between the Timer, Ozone generator, FAN, and LED components. It shows the power input terminals labeled N (Neutral), L (Line), and GRN (Ground), with the GRN terminal connected to the ground symbol.

Limited Warranty

All warranty benefits apply exclusively to the original owner and are non-transferable or assignable.

Warranty Period

The warranty becomes effective from the date of original purchase and lasts for two (2) years.

Who's Covered?

This limited warranty is exclusively for the original purchaser and is NOT transferable.

Who's Not Covered?

This limited warranty is exclusively for the original purchaser and is NOT transferable. Coverage is excluded for:

1. Damage caused by the owner attempting to fix or alter the product.
2. Damage caused by misuse, abuse, neglect, alterations, or unauthorized repair.
3. Natural depreciation.

How to Request Warranty Services?

To obtain warranty benefits, please submit your message online at www.baseaire.com or send an email to sales@baseaire.com. Customer service will address your issue within 24 hours.

BaseAire Warranty Steps:

1. Upon receiving the goods, customers must log in to www.baseaire.com to complete the warranty registration form and submit it to BaseAire. Your purchasing and installation information will be received and saved. If no registration is submitted, the warranty period begins on the shipment date from the warehouse. Record the serial # and installation date for RA number requests.
2. For warranty service, contact BaseAire Tech Support via sales@baseaire.com or the local technical service phone number to obtain a Return Authorization (RA) number. Once an RA is issued, bring the unit to a certified repair center. BaseAire will arrange shipping back to the warehouse if customers are unavailable (at customer's expense).
3. After the unit is received by BaseAire (at a repair center or warehouse), an initial inspection will be conducted. If the claim is determined to be invalid (see exclusions), customers must cover all associated repair and shipping costs.
4. Customers may pick up the repaired unit at their own expense for shipping. Units undergo rigorous testing before return.
5. If the unit cannot be fixed and is within the warranty period with a valid claim, a new unit will be shipped within the same warranty year from the replacement date.
6. After parts are repaired or replaced by BaseAire, the original warranty period continues until its deadline. No extensions are granted.

Limited Warranty Exclusions

Damage due to the following is NOT covered under warranty:

1. ACTS OF NATURE: Including but not limited to Flooding, Fire, Water Damage, Hurricane Storm Damage.
2. IMPROPER USAGE: Including but not limited to Pool/spa/tub Applications, Misuse, Abuse Or Tampering (Intentional Or Accidental), Improper Installation Or Design, Mproper Voltage, Lack Of Normal Care, Failure To Follow Instructions.
3. CORROSION
4. FREEZING
5. ADDITIONAL COSTS DUE TO CHANGES IN LAWS OR BUILDING CODES
6. FREIGHT CHARGES
7. COSTS DUE TO LOST PROFIT OR DELAY
8. DAMAGE TO PROPERTY
9. CAUSE BEYOND CONTROL
10. DIRECT, INDIRECT, COLLATERAL OR INCONSEQUENTIAL DAMAGES OF ANY KIND

The warranties and liabilities set forth are in lieu of all other warranties, expressed or implied by law or in fact, including implied warranties of MERCHANTABILITY and FITNESS FOR A PARTICULAR PURPOSE.

BaseAire's total liability, regardless of the nature of the claim, shall not exceed the original purchase price of the product. If a product or component is replaced under warranty, the applicable warranty period shall not extend beyond the original warranty time period.

The foregoing constitutes the total liability of the seller in case of defective performance of the equipment or services provided to the buyer. The buyer agrees to accept the foregoing as the sole and exclusive remedy for any breach or alleged breach of warranty by the seller.

Any dishonesty or fraud in connection with a BaseAire warranty voids all warranty policies. BaseAire expressly reserves the right to pursue legal action in the event of dishonesty, fraud, or attempted fraud.