Anet ET5 X Setup Manual
Anet 3D PRINTER
Use Instruction
- The printer is of DIY collection. Some parts need to be assembled by customers. Customers are advised to fix every connection with Hot Glue / Silica Gel.
- Do not use the machine in any way not described in the instructions. Improper use may cause serious injuries and property damage.
- Keep the printer away from heat sources, fire, flammable and explosive materials. Place the printer in a ventilated, cool and dust-free environment.
- Do not place the printer on unstable surfaces, as machine vibration can affect printing quality.
- Use only the original power cord supplied with the printer. Do not replace the power cord during installation. The working power supply is 110V/220V AC. Plug the power cord into a three-hole socket with a ground wire to avoid component damage, accidents, fire, or electric shock.
- Do not touch the nozzle, extruder, or heating bed while operating the printer to prevent burns and personal injuries.
- Avoid wearing gloves or bracelets when operating the machine to prevent entanglement and cutting damage on human body parts.
- After printing, clean up material residues with tools while the nozzle is still warm. Do not touch the nozzle by hand during cleaning to prevent burns.
- Regular maintenance is crucial for keeping the printer in good condition and achieving high-quality prints. Before any repair, turn off the printer and let it cool down. Wipe away dust and material residues with a dry cloth. Lubricate sliding parts, screw rods, and bearing parts with grease.
- The printer is not intended for use by children under 14 or people over 60. Use under assistance and guidance to avoid personal injury.
- Self-disassembly or modification may cause damage or abnormal performance, and the machine will no longer be covered by warranty service.
- Turn off the power supply after use.
- The recommended filament for this printer is 1.75mm PLA. Anet official filament is recommended.
- More information is available on the flash disk in the package. Visit www.anet3d.com regularly for the latest news and updates.
Specifications
| Specifications | Details |
|---|---|
| Model | ET5 X |
| Printing Technology | FDM |
| Filament | PLA 1.75mm |
| Machine Power | 320W |
| Power Supply | 360W |
| Printing Size | 300*300*400mm |
| Machine Size | 540*520*640mm |
| Printing Speed | <150mm/s (recommended speed 30-60mm/s) |
| Printing Resolution | ±0.1mm |
| Slice Thickness | 0.1-0.3mm |
| Machine Net Weight | 9.7±0.2Kg |
| Standard Nozzle Diameter | 0.4mm |
| Hotbed Temp | <100°C |
| Extruder Working Temp | <250°C |
| Language | English / Chinese |
| Auto Filament Dispenser | Yes |
| Filament Detection | Yes |
| Auto Leveling | Yes |
| Resume Printing | Yes |
| Offline Print | Yes |
Assembly Diagram
The following diagrams illustrate the assembly process:
- Step 1: Assemble the main frame components. Secure connections as indicated.
- Step 2: Install the filament feeding system. Ensure proper tensioning.
- Step 3: Connect the electronic components, including the motherboard, motors (E-M, S-X, X-M), sensors (MAT, END, LV), and fans (TMP, FAN).
- Step 4: Attach the X-axis assembly and connect the necessary cables.
Refer to the provided diagrams for detailed visual guidance on each step, including the placement of parts and connections.
Important Notices
- Anet reserves the right to interpret and amend this manual without prior notification.
- The content, including product appearance and software UI, is for reference only and does not constitute a commitment. Actual products may vary.
- Data provided are theoretical values obtained from internal laboratory tests. Actual performance may vary based on specific models, software versions, application usage, and environmental factors.
