Instructions for ALPINE models including: ALPINE, Speed Camera, DVR-F800PRO, DVR-F200, DVR-C320S, DVR-C310S

ALPS ALPINE EUROPE GmbH, Alpine Brand

DVR-F800PRO / DVR-F200 / DVR-C320S / DVR-C310S Speed ...

Dash Cam Settings Safety Cameras Safety Cameras Enabled Disabled Mobile Zone Alert Enabled Disabled THINKWARE DASH CAM cont rec driveinfo evt rec manual rec motion timelapse rec parking rec SETTING User Guide Alpine Dashcam Viewer for Mac v1.0.2.dmg device.uid F800PRO boot.bin F800PRO pkg.bin setup. exe

DVR-F800PRO / DVR-F200 / DVR-C320S / DVR-C310S Speed Camera ...

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • Text

File Info : application/pdf, 1 Pages, 212.82KB

DVR-F800PRO / DVR-F200 / DVR-C320S / DVR-C310S Speed Camera Data Base Update Procedure

Update procedure

Update procedure diagram

1. Download the ,,smartguidepoint.zip" File to your computer, for example into folder for Downloads.

2. Unzip the zip.file and save the "smartguidepoint.dx2" on your computer.

3. Take the Memory Card out of the Dash Cam.

4. Insert the Memory Card into your computer and open the Memory Card content.

5. Copy /Replace the ,,smartguidepoint.dx2" file, which you find in the ,,driveinfo" folder. (There is an old ,,smartguidepoint.dx2" in the folder, replace that with the new ,,smartguidepoint.dx2" file)

6. Take the Memory Card out of your computer and put it 32 back into the Dash Cam.

7. The new Speed Camera Data Base is automatically working, when the function is activated.
Please note for DVR-F200 / DVR-C310S: The speed camera data base works only, when the GPS antenna is connected!

ALPS ALPINE EUROPE GmbH, Alpine Brand.