Nomadelic Solo 300 True Wireless ANC Earbuds

Overview

A line drawing shows a pair of true wireless earbuds and their charging case.

• 1 Touch control surface: Used for playback, volume, ANC, and call controls.
• 2 Microphone: For voice calls and voice assistant interaction.
• 3 LED indicator: Displays charging status and pairing mode.
• 4 Reset button: Used for resetting the earbuds.
• 5 Charging port: USB-C port for charging the case.

Specifications

Use

Charging

Charge the case and earbuds fully before first use.

Connect the USB-C cable to the charging port (5) on the charging case and a computer or USB power adapter. The LED indicator (3) on the case lights up: pulsating red for below 20% battery, pulsating blue for above 20% battery, and solid blue when fully charged.

Place the earbuds in the case to charge them. The LED indicator on the case shows the earbuds' charging status: red pulsating for below 20%, blue pulsating for above 20%. The indicator turns off when earbuds are fully charged.

Power on/off

Open the charging case to turn the earbuds on automatically. Close the lid to turn them off.

Manually power on by holding the touch control surface (1) for 2 seconds.

To save battery, earbuds automatically turn off after 5 minutes of being out of Bluetooth range.

Pairing

Open the charging case; earbuds connect to each other automatically.

On your device, open Bluetooth settings and connect to "Nomadelic Solo 300". Earbuds are ready to use.

Pairing occurs automatically each time earbuds are removed from the case after the initial setup.

Control music and voice assistant

• Play/pause: Double-tap the left or right earbud control surface (1).
• Increase volume: Tap the right earbud.
• Next song: Press and hold the right earbud for 1 second.
• Decrease volume: Tap the left earbud.
• Previous song: Press and hold the left earbud for 1 second.
• ANC on/off/hear through: Hold the left or right earbud for 3 seconds.
• Voice assistant: Triple-tap the left or right earbud to activate/deactivate.

Control calls

• Answer a call: Tap the left or right earbud.
• Hang up a call: Double-tap the left or right earbud.
• Reject a call: Hold the touch control surface of the left or right earbud for 1 second.

Reset

If earbuds do not pair correctly, try resetting them.

Place earbuds in the case. Press and hold the Reset button (4) for 5 seconds. The LED indicator (3) will flash red and blue alternating 6 times.

Active Noise Canceling (ANC)

Hold the touch control surface of the left or right earbud for 3 seconds to cycle through ANC modes: on, off, and hear through.

Troubleshooting

FAQ

Q1: Pairing fails.

1. Place earbuds in the charging case and close the cover.
2. Take earbuds out; they enter pairing mode automatically. Select "Nomadelic Solo 300" in your phone's Bluetooth settings.
3. If pairing still fails, ensure:
   • Earbuds and Bluetooth device are close (within 10 meters) with no obstacles.
   • No nearby signal interference (see "Connection is not stable").
   • Reboot your Bluetooth device or reset the earbuds.

Q2: I paired the earbuds with my phone before, but failed to pair them again.

On your phone, turn on Bluetooth. In "My devices"/"Paired devices", select "Nomadelic Solo 300" and tap "Forget This Device". Then, pair the earbuds again.

Q3: Connection is not stable.

Ensure Bluetooth connection is within 10 meters, with no objects or interfering radio/Wi-Fi signals between the earbuds and your device.

Q4: Power runs out fast.

Earbud playtime varies with volume and audio content. Place earbuds in the charging case after use to avoid unnecessary power consumption.

Q5: The earbuds are reconnecting to my phone while being charged in the case.

If the charging case runs out of power during charging, earbuds automatically turn on and reconnect to the last paired device. If not paired within 5 minutes, they turn off.

Safety Information

To prevent possible hearing damage, do not listen at high volume levels for long periods.

This product contains a rechargeable Li-Po battery that cannot be replaced.

Declarations and Compliance

Simplified EU Declaration of Conformity

Kjell & Company declares this device complies with essential requirements of Directive 2014/53/EU. Full text available at www.kjell.com/24356.

Recommended power adapter

For optimal and safe performance, use a CE-certified adapter with specifications: Minimum charging power: 0.1 Watt, Maximum charging power: 1.5 Watts.

Symbol Description

CE: Indicates compliance with EU directives. WEEE (Waste Electrical and Electronic Equipment): This symbol means the product should not be disposed of with household waste within the EU. It must be recycled at an approved e-waste collection point or returned to the retailer for responsible handling and recycling.