ICE Watch Digital Retro User Manual

Attention and General Information

Attention:

• Never attempt to open the case or remove the back cover.
• Do not operate buttons underwater.
• If moisture appears inside the watch, have it checked immediately by your dealer. Otherwise, it can cause erosion of the metal parts of the watch.
• Though the watch is designed to withstand normal use, avoid rough use or dropping the watch.
• Avoid exposing the watch to extreme temperatures.
• Wipe the watch with a dry, soft cloth only. Avoid direct contact with chemical materials, which can cause deterioration of the plastic parts of the watch.
• Avoid wearing the watch in electromagnetic or static conditions.
• The information contained in this document belongs to ICE Universal Ltd and may not be reproduced without its authorization.

Water Resistant: 30m

Battery: CR1616

General Functions:

• Backlight: Press and hold C to illuminate the display.
• Display Date: Press and hold D to display Year, Month, Date.
• Display Alarm Time: Press and hold B.
• Activate Alarm and Chime: Press B once, then D three times.
• Deactivate Alarm and Chime: Press B once, then D once.
• Display Dual Time for Other Time Zone: Press B three times.

Time Setting

1. Press and hold A until the seconds flash (indicating set mode).
2. Press D to reset the seconds.
3. Press B to change to the next selection.
4. Press D to increase the number; press and hold to increase at high speed.
5. Repeat steps 3 and 4, selecting in the following sequence: SECONDS › HOUR › MINUTES › YEAR › MONTH › DATE.
6. Press A once to return to the time screen.

In Time Setting Mode, press A to switch between 12/24H formats.

Alarm Time Setting

1. Press B once to access the Alarm Mode.
2. Press A for the hour to flash (indicating set mode).
3. Press D to increase the hour; press and hold to increase at high speed.
4. Press B to select the minutes.
5. Press D to increase the minutes; press and hold to increase at high speed.
6. Press A once and B three times to return to the time screen.

Snooze: The alarm sounds at the same time each day for about 60 seconds. Press any button to stop it.

Stopwatch - Lap Time

1. Press B twice to access the Stopwatch Mode.
2. Press D to start the stopwatch.
3. Press D again to stop the stopwatch.
4. Press A to reset the stopwatch.
5. Press A once and B twice to return to the time screen.

Stopwatch - Split Time

1. Press B twice to access the Stopwatch Mode.
2. Press D to start the stopwatch.
3. Press A to display the split time; the stopwatch continues timing internally.
4. Press A to clear the split time and continue time measurement. Repeat steps 3 and 4 to measure multiple split times.
5. Press D to stop the stopwatch.
6. Press A once and B twice to return to the time screen.

Dual Time

1. Press B three times to access the Dual Time Mode.
2. Press A for the hour to flash (indicating set mode).
3. Press D to increase the hour; press and hold to increase at high speed.
4. Press B to select the minutes.
5. Press D to increase the minutes (press once to change by 30 minutes).
6. Press A once and B once to return to the time screen.

Multilingual Instructions Summary

This manual is also available in French, German, Dutch, Italian, Portuguese, and Spanish, providing detailed instructions for setting the time, alarm, using the stopwatch (lap and split times), and configuring dual time zones.