User Manual for RAK models including: RAK5146, 2AF6B-RAK5146, 2AF6BRAK5146, RAK7268 Series WisGate Edge Lite 2 Gateway, RAK7268 Series, WisGate Edge Lite 2 Gateway, Edge Lite 2 Gateway, Lite 2 Gateway, Gateway

MASTER

User Manual

Shenzhen RAKwireless Technology Co.,Ltd. RAK5146 2AF6B-RAK5146 2AF6BRAK5146 rak5146

User Manual Host

Shenzhen RAKwireless Technology Co.,Ltd. RAK2287X 2AF6B-RAK2287X 2AF6BRAK2287X rak2287x


File Info : application/pdf, 8 Pages, 425.58KB

PDF preview unavailable. Download the PDF instead.

GetApplicationAttachment.html?id=5972245
User manual for
WisGate Edge Lite 2 (RAK7268 series)

1 Overview

This document helps customers quickly understand the hardware interface, RF, software, and electrical specifications of RAK7268.
1.1 Variety of the Product Series

 Main model: RAK7268XXX  Sub-models:
Indicator C V2 H

Meaning With Cellular connectivity With WisGateOS 2 With a Bluetooth

1.2 Description
The RAK7268 WisGate Edge Lite 2 (and all its varieties) is a full 8-channel indoor gateway, based on the LoRaWAN protocol, with built-in Ethernet connectivity for a straightforward setup. Additionally, there is an onboard Wi-Fi setup (supporting 2.4G Wi-Fi) that allows it to be easily configured via the default Wi-Fi AP mode. Additionally, the gateway supports LTE cellular connection available with the C models (RAK7268C).
As with the other RAKwireless Industrial Gateways, it also supports MQTT Bridge mode, with the option for TLS authentication.
Power-over-Ethernet (PoE) is supported to serve cases where wall or ceiling mounting is required without the need to install additional power lines.
The software(WisGateOS/2) for the management and configuration of this gateway device is based on OpenWRT. It has a built-in LoRa packet forwarder and a graphical user interface, allowing for a quick setup without giving up the freedom of a fully customized solution.
RAK7268 also supports the MQTT Bridge function and can use the MQTT integrated into third-party platforms.
RAK7268 is especially suitable for small and medium-sized deployment scenarios in industry applications, saving the additional cost for server and R&D investment, and has the advantages of high execution efficiency.
1.3 Product Features
 Full LoRaWAN Stack support in Built-In Server mode  Supports 2.4 G Wi-Fi AP for configuration  100M Base-T Ethernet with PoE  Multi back-haul with Ethernet and Wi-Fi  Cellular LTE Cat 4 network (optional, available with C versions)  BLE connectivity (optional, available with H versions)  OpenWRT software supports Web UI for easy configuration and monitoring  Can integrate with both private (e.g. Chirp Stack) and public (e.g. TTN) network servers  SD card for system logs backup  Built-in Network Server for easy deployment of applications and integration of gateways

Manufacturers Address
Shenzhen RAKwireless Technology Co.,Ltd. Room 506, Bldg B, New Compark, Pingshan First Road, Taoyuan Street, XiLi Town Nanshan District, Shenzhen, China
2 Specifications
2.1 Hardware Interfaces
The hardware interfaces of WisGate Edge Lite 2 gateway include DC 12V, ETH interface, Console interface, Reset key, TF Card slot, Status indicator LEDs, LoRa Antenna connector, etc. As shown in the following figure.
Figure 1: RAK7268 Interfaces
 The function of the Reset key is as follows: Short press: Restart the Gateway. Long press (5s and above): Restore Factory Settings.
 The following table shows the LEDs status of RAK7268.

LEDs

Status Indication Description

PWR LED

Power indicator - The LED is on when device power is on

Breathing LED ETH LED
LoRa LED

Breathing after system up ON - Linkup OFF ­ Link down Flicker - Data transmitting and receiving ON - LoRa is working OFF - LoRa is not working
Flicker - Indicate LoRa Packet receiving and sending

WLAN LED LTE LED (functional only in C models)

AP Mode: -ON - The AP is up -OFF - The AP is down -Flicker - Data receiving and sending STA Mode: -Slow flicker (1 Hz) - Disconnected -ON - Connected -Flicker - Data receiving and sending Slow Flicker (1800 ms High / 200 ms Low) Network searching Slow flicker (200 ms High / 1800 ms Low) Idle Fast flicker (125 ms High / 125 ms Low) Ongoing data transfer

Note: The SD card and the SIM card do not support hot-swap. Please always turn off the gateway before you insert or take off SIM or SD card.
Note: Do not power the Gateway without a connected antenna/s. This may damage the radios.

2.2 Main Specifications
Feature
Power supply Wi-Fi feature Power consumption ETH Console
Cellular (optional, available with C models) Ingress protection Enclosure material Weight

Specifications DC 12 V - 1 A PoE (IEEE 802.3 af), 36~57 VDC 12 W (typical) RJ45 (10/100 M) Type-C USB
Breathing LED (Top side)
ETH LED (On ETH connector) LoRa LED WLAN LED LTE LED (functional only in C models) IP30 Plastic 0.3 kg

Dimension

166x127x36 mm

Operating temperature Installation method

-10 to 45° C Wall mounting

2.3 Software Specifications

The following chapters introduce software specifications of RAK7268 indoor gateway. It includes LoRa, network and management.

LoRa

Network

Management

 Supports class A, C

 Supports Wi-Fi AP mode

 WisDM remote management

 Supports LoRa package

 Supports uplink backup

platform

forward

 Supports 802.1q

 Supports WEB management

- Packet Forwarder

 Supports DHCP Server/Client  Supports SSH2

- BasicsTM Station

 Supports router module NAT  Supports firmware update

- RAK Built-In Server

 Supports firewall

 Supports country code setup

 Supports NTP  Supports configuring the

 Supports TX power setup

LoRa Packet Forwarder

 Supports data logger

 Supports Build-in LoRa Server

 Supports statistic  Supports location setup  Supports server address &
port setup

 Supports OpenVPN, Ping Watch Dog
 Supports MQTT Bridge

3 Configure the Gateway
You can log in to the WEB management page to overview the status of your gateway and configure it. By default, the gateway will work in Wi-Fi AP Mode, which means that you can find an SSID named RAK7268_XXXX on your PC's Wi-Fi Network List. XXXX is the last two bytes of the gateway's MAC address. No password is required to connect via Wi-Fi. Using your preferred Web browser, access the gateway on the IP address shown below: Browser Address: 192.168.230.1 Username: root Password: root For WisGate Edge Lite 2 models V2 and H you need to set the login password at the first login. For more information about the WEB management platform and the configuration guide of the gateway, please refer to this document: https://docs.rakwireless.com/Product-Categories/WisGate/RAK7268/Overview/

4 Contact Information
Please contact us if you need technical support or want to know more information.
 Support center: https://forum.rakwireless.com/  Documentation Center: https://doc.rakwireless.com/  Email: info@rakwireless.com

5 Certification Information

CE Operating frequency range:
Technology
LoRa
BLE WLAN 802.11 b/g/n GSM 900 GSM 1800 WCDMA Band I WCDMA Band VIII
Band 1 LTE
Band 3

Frequency band [MHz]
863-865, 865-868, 868-868.6, 868.7-869.2, 869.7-870 869.4-869.65 2402-2480 2400-2483.5 880-915(TX)925-960(RX) 1710-1785(TX)1805-1880(RX) 1920-1980(TX)2110-2170(RX) 880-915(TX)925-960(RX) 1920-1980(TX)2110-2170(RX) 1710-1785(TX)1805-1880(RX)

Maximum RF output powerdBm 14
27 10 20 33 30 24 24 23 23

Band 7 Band 8 Band 20 Band 28A

2500-2570(TX)2620-2690(RX) 23

880-915(TX)925-960(RX)

23

832-862(TX)791-821(RX)

23

703-733(TX)758-788(RX)

23

SIMPLIFIED EU DECLARATION OF CONFORMITY

Hereby, Shenzhen RAKwireless Technology Co.,Ltd. declares that the radio equipment type RAK7268/RAK7268V2/RAK7268V2H is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
https://downloads.rakwireless.com/LoRa/RAK7268/Certification/RAK7268%20%20CE%20DOC.pdf

The radio equipment type RAK7268C/RAK7268CV2/RAK7268CV2H is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://downloads.rakwireless.com/LoRa/RAK7268/Certification/RAK7268C%20%20CE%20DOC.pdf

Economic operators for EU: Company Allnet Marcom SRL (marcomweb) Arduino SRL

Address
Maistr. 2, Munich 82110 Germering, Germany
Via della Metallurgia 11, 37139 Verona, Italy
Via Andrea Appiani 25, 20900 Monza MB Italy

Economic operators for UK: Company Metavurt Ltd

Address
1st Floor Tuspark Newcastle 27 Grainger Street NE1 5JE Newcastle upon Tyne UK

Correct Disposal of this product. This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 30 cm between the radiator and any part of your body for RAK7268/RAK7268V2/ RAK7268V2H, and 40cm for RAK7268C/RAK7268CV2/ RAK7268CV2H.
ISEDC
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired
operation of the device. L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
1. L'appareil ne doit pas produire de brouillage; 2. L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
The device complies with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance. The minimum distance from the body to use the device is 30 cm for RAK7268/RAK7268V2/ RAK7268V2H, and 40 cm for RAK7268C/RAK7268CV2/ RAK7268CV2H.
Le présent appareil est conforme Après examen de ce matériel aux conformité ou aux limites d'intensité de champ RF, les utilisateurs peuvent sur l'exposition aux radiofréquences et la conformité and compliance d'acquérir les informations correspondantes. La distance minimale du corps pour utiliser l'appareil est de 30 cm pour RAK7268/ RAK7268V2/ RAK7268V2H, et de 40 cm pour RAK7268C/ RAK7268CV2/ RAK7268CV2H.



References

Microsoft Office Word Aspose.Words for .NET 15.1.0.0