Instruction Manual for lEDYi Lighting models including: S1-B Bluetooth and RF AC Triac Dimmer, S1-B, Bluetooth and RF AC Triac Dimmer
il y a 1 jour — Each S1-B(WB) controller can also work as Bluetooth-RF converter, then use Tuya APP to control one or more RF dimming LED controller or driver synchronously ...
User Manual Ver 1.0.2. Operation temperature. Case temperature (Max.) Environment. IP20. IP rating. Dimming data. Dimming range. Tuya APP RF Push Dim.
Index of /wp-content/uploads/2022/04/
Bluetooth & RF AC Triac Dimmer Model No.: S1-B(WB) Tuya APP cloud control/RF dimming/Push Dim/Leading edge or trailing edge/Wall junction box mounting Features Bluetooth + RF + Push AC phase-cut dimmer, 1 channel output. To dim and switch single color dimmable LED lamps, traditional incandescent and halogen lights. Tuya APP cloud control, support on/off, brightness adjust, delay turn on/off light, timer run, scene and music play function. 256 levels 0-100% dimming smoothly without any ash. Leading edge dimming or trailing edge dimming set by dip switch. Min brightness can be set by key. Light on/off fade time 3s selectable. Compatibility with RF 2.4G single zone or multiple zone dimming remote control. Each S1-B(WB) controller can also work as Bluetooth-RF converter, then use Tuya APP to control one or more RF dimming LED controller or driver synchronously. Connect with external push switch to achieve on/off and 0-100% dimming function. Easy to be placed in standard wall junction box behind a push switch. Over-heat / Over-load protection, recover automatically. LVD Technical Parameters Input and Output Input voltage Output voltage Output current Output power AC100-240V AC100-240V Max 1.5A 150-360W Environment Operation temperature Case temperature (Max.) IP rating Warranty Warranty Ta: -30 OC ~ +55 OC T c: +85OC IP20 5 years User Manual Ver 1.0.2 Safety and EMC EMC standard (EMC) Safety standard(LVD) Radio Equipment(RED) Certification ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4 EN 62368-1:2020+A11:2020 ETSI EN 300 328 V2.2.2 CE,EMC,LVD,RED Dimming data Input signal RF Control distance Dimming level Dimming range Tuya APP + RF + Push Dim 30m(Barrier-free space) 256 levels 0 -100% Weight Weight unit(g) Net weight 0.048kg Gross weight 0.061kg Mechanical Structures and Installations AC Push switch DIP switch for Leading edge or trailing edge phase-cut select Match / Min brightness set key AC N output AC L output ON Match Min set A2 A1 100-240 VAC OUTPUT LN INPUT N L AC N input AC L input 52.00 mm 26.00 mm Typical Wall Junction Box Mounting Systemwiring 3G/4G/5G WiFi Tuya Cloud 15m Mobile Phone 15m 15m WiFi Router Tuya Bluetooth Gateway S1-B(WB) Dimmable LED light Amazon ECHO S1-B(WB) Dimmable LED light 30m RFRemote(Optional) S1-B(WB) Triac Dimmable LED Driver LED light ZONE POWER ZONE SCENE ZONE SCENE ZONE SCENE PanelRFRemote(Optional) 30m S1-B(WB) Triac Dimmable LED Driver Wired connection Wireless connection Note: 1.Theabove distance is measured in spacious(noobstacle) environment, Please refer to the actual test distance before installation. 2.Users must use the Tuya Bluetooth gateway to realize remote control and voice control. LED light Push Switch 52.00 mm Push Switch Push Switch S1-B(WB) Bluetooth & RF AC Triac Dimmer Wiring diagram Caution: Please carefully ensure all wire connections and polarities are correct and secure before applying power, otherwise this controller will be damaged. Push Switch Push Switch ON Match Min set A2 A1 100-240 VAC S1-B(WB) OUTPUT LN INPUT NL ON Match Min set A2 A1 100-240 VAC S1-B(WB) OUTPUT LN INPUT NL Dimmable LED light Connect with dimmable LED light Triac Dimmable LED Driver LED light Connect with Triac dimmable LED driver Note: When calculating the maximum number of load lamps or drivers, the input power or input current parameters of a single lamp or driver must be used, the output power parameters can not be used. In addition, the maximum surge current of the dimmer is 65A, the sum of surge current of multiple dimmable LED drivers should not exceed 2 times. otherwise, the product will be overloaded and damaged. Compatible Load Types Load Type Dimmable LED lamps Maximum Load 200W @ 220V 100W @ 110V Triac Dimmable LED drivers 200W @ 220V 100W @ 110V Incandescent lighting, HV Halogen lamps 400W @ 220V 200W @ 110V Remarks Due to variety of LED lamp designs, maximum number of LED lamps is further dependent on power factor result when connected to dimmer. Maximum permitted number of drivers is 200W divided by driver nameplate power rating, and make sure the surge current is no more than 2 times 65A. Page 1 Leading edge or trailing edge dimming setting Select leading edge(forward-phase) dimmer or trailing edge(reverse-phase) dimmer according to dimmable LED light or driver. ON Reverse-phase Forward-phase Caution: before power on, you must confirm the selection of dip switch. Min brightness setting Long press Min set key for 10s, the light blink 2 times, ready for min brightness set, then short press Min set key 1-6 times, to get 6 min brightness: 5%, 10%, 15%, 20%, 25% or 30%, the light will output the current min brightness immediately, Wait 8s, quit min brightness set automatically, the light will return output 100% brightness. Tuya APP network connection and operation Press and hold Match/Set key for 5s, or push twice Match/Set key fastly, Clear previous network connection, enter config mode. the blue LED indicator fast flash. If Tuya APP network connection succeed, the blue LED indicator will stop flash, and in Tuya APP, you can find BT-DIM device. Tuya APP interface operation: Touch brightness slide to adjust brightness. BT-DIM User Manual Ver 1.0.2 S1-B(WB) match RF remote control (Optional) End user can choose the suitable match/delete ways. Two options are offered for selection: Use the S1-B(WB)'s Match key Use Power Restart Match: Short press match key of S1-B(WB), immediately press on/off key (single zone remote) or zone key (multiple zone remote) on the remote. Delete: Press and hold match key of S1-B(WB) for 15s to delete all match, The light blinks 5 times means all matched remotes were deleted. Match: Switch off the power of S1-B(WB), then switch on power, repeat again, Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful. Delete: .Switch off the power of S1-B(WB), then switch on power, repeat again, Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted. S1-B(WB) work as Bluetooth-RF converter to match other RF dimming LED controller or driver End user can choose the suitable match/delete ways. Two options are offered for selection: Use the controller's Match key Use Power Restart Match: Short press match key of the controller, immediately press on/off key on the Tuya APP. The LED indicator fast flash a few times means match is successful. Match: Switch off the power of the controller, then switch on power, repeat again, Immediately short press on/off key 3 times on the Tuya APP. The light blinks 3 times means match is successful. Delete: Press and hold match key of the controller for 5s, The LED indicator fast flash a few times means match was deleted. .Delete: Switch off the power of the controller, then switch on power, repeat again, Immediately short press on/off key 5 times on the Tuya APP. The light blinks 5 times means match was deleted. AC Push Dim Function (Optional) Short press: Turn on or off light. Long press (1-6s): Press and hold to step-less dimming, With every other long press, the light level goes to the opposite direction. Dimming memory: Light returns to the previous dimming level when switched off and on again, even at power failure. S1-B(WB) Bluetooth & RF AC Triac Dimmer Light on/off fade time Switch off the power, then switch on power, repeat again. Immediately short press match key 3 times, the light on/off time will change between 3s and 0.5s. Page 2Corel PDF Engine Version 16.1.0.843 CorelDRAW X6