Philips Uni DMX controls and accessories
ZXP399 DMX controller mini 12V 1port
The ZXP399 DMX Controls and Wiring Accessories are designed for use with Philips architectural and facade lighting luminaires, including UniFlood C, M and G, UniStrip G4, UniEdge, UniDot G2, UniString, and UniBar. The DMX Controls system comprises a main controller, stand-alone controller, sub-controllers, a DMX amplifier, and a DMX addressing device.
The Main Controller can manage up to 6,000 DMX universes, while the Stand-alone Controller is suitable for medium applications with up to 700 DMX universes. The wiring accessories include leader and jump cables with male and female IP67 connectors and end-caps. The Addressing Device is a handheld tool for writing DMX addresses on-site, and the DMX Amplifier is a compact, IP65, low-power repeater that extends the DMX signal range by up to 100 meters.
Product Data
| Operating and Electrical | Net Weight (Piece) | 0.096 kg | |
|---|---|---|---|
| Input Voltage | 12 to 48 DC V | Approval and Application | |
| Protection class IEC | Safety class III | CE mark | Yes |
| Mechanical and Housing | |||
|---|---|---|---|
| Overall length | 71 mm | Product Data | |
| Overall width | 71 mm | Order product name | ZXP399 DMX controller mini 12V 1port |
| Overall height | 24 mm | Full product name | ZXP399 DMX controller mini 12V 1port |
| Dimensions (Height x Width x Depth) | 24 x 71 x 71 mm | Full product code | 871951494734400 |
| Material | Aluminum | Order code | 911401779652 |
| Ingress protection code | IP20 [Finger-protected] | Material Nr. (12NC) | 911401779652 |
| Accessory color | Gray | Numerator - Quantity Per Pack | 1 |
Dimensional Drawing
The dimensional drawing shows a compact rectangular unit with connection ports. Key dimensions indicated are approximately 71mm x 71mm x 24mm. A port labeled '12-48V DC' is visible, along with a DMX output port. There are also control buttons labeled 'Mode', '+' and '-'.
