MICROWAVE DRAWER

Model Numbers: COS-MWD3012GBK, COS-MWD3012GSS, COS-MWD3012NHBK, COS-MWD3012NHSS

30 in. BUILT-IN MICROWAVE DRAWER

INSTALLATION INSTRUCTIONS

IMPORTANT: READ AND SAVE THESE INSTRUCTIONS. FOR RESIDENTIAL USE ONLY.

INSTALLER: PLEASE LEAVE THESE INSTRUCTIONS WITH THIS UNIT FOR THE OWNER.

OWNER: PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Rev. 25.09

THANK YOU FOR YOUR PURCHASE

Thank you for your purchase. Cosmo Appliances are designed according to the strictest safety and performance standards for the North American market, following advanced manufacturing philosophy. Each appliance undergoes thorough quality inspection and testing. Distributors and service partners are available to answer questions regarding installation, use, and care. This manual is intended to help you learn to use the product safely and effectively. Please read this manual carefully and keep it in a safe place for future reference. Ensure other users are familiar with these instructions.

For questions or concerns, contact the dealer or COSMO Customer Support at: 1-888-784-3108. Reach us online at: www.cosmoappliances.com

MICROWAVE DRAWER SAFETY

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE

Your safety and the safety of others are very important. Always read and obey all safety messages provided in this manual and on the appliance.

This is the safety alert symbol: ⚠️. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow this symbol and either the word "WARNING" or "CAUTION".

• WARNING: You can be killed or seriously injured if you don't follow instructions.
• CAUTION: A potentially hazardous situation which, if not avoided, could result in minor or moderate injury.

Safety messages will identify the hazard, explain how to reduce the chance of injury, and state what can happen if instructions are not followed.

California Proposition 65 Warning: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

This device complies with Part 18 of the FCC Rules.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: If the information in this manual is not followed exactly, a fire or electrical shock may result that could cause property damage, personal injury, or death.

• Installation and service must be performed by a qualified installer.
• Save this installation manual for local electrical inspector's use.
• To reduce the risk of tipping, the microwave drawer must be secured by a properly installed Anti-Tip block.
• Do not install the microwave drawer in any combustible cabinetry.
• Ensure wall coverings and cabinets around the microwave drawer can withstand the heat generated by the appliance.
• This microwave drawer must be electrically grounded in accordance with local codes.
• Check the drawer for any damage (e.g., misaligned or bent drawer, damaged seals, broken or loose guides, dents). If damaged, do not operate and contact your dealer or an authorized servicer.
• Remove all packing materials from inside the microwave drawer.
• Do not step, lean, or sit on the drawer, as this may result in serious injuries and damage to the appliance.
• Do NOT remove the waveguide cover located on the top of the microwave drawer.
• Remove the feature sticker if present.

NOTES TO INSTALLER:

• Read all of the installation manual before installing.
• Remove all packing material before connecting the electrical supply.
• Observe all governing codes and ordinances.
• Leave these instructions with the consumer.

NOTES TO CONSUMER:

• Keep this manual with your operation manual for future reference.
• Ensure your microwave drawer is installed and grounded properly by a qualified installer or service technician.

INSTALLATION REQUIREMENTS

LOCATION REQUIREMENTS

IMPORTANT: The installation location must provide:

• A solid and level contact surface.
• A floor capable of supporting approximately 100 pounds; plywood construction is recommended.
• Proper electrical supply.
• The drawer can be built into a cabinet or wall, or under a gas or electric wall oven (ensure a minimum 2-inch clearance from the oven floor).
• An electrical outlet in an adjacent cabinet is permissible if the power cord can reach it. The power cord access hole in the cabinet should be a minimum 1 1/2" diameter and debarred of sharp edges.
• Sufficient power cord length to reach the outlet without tension.
• Compliance with electrical codes.
• Cabinets and wall coverings must be able to withstand the heat generated by the microwave drawer.

CLEARANCE

GIVEN DIMENSIONS ARE MINIMUM CLEARANCES.

Diagram Description: The diagram illustrates required clearances for installation. Key dimensions include:

• Cabinet Width: 30" (762 mm)
• Countertop Height: 36" (915 mm)
• Opening Height: 14 13/16" (376 mm)
• Opening Width: 22 7/8" to 28 7/16" (562 mm to 722 mm)
• Opening Depth: 23 1/2" (597 mm)
• Drawer Opening Clearance: 7/16" (11 mm)
• Side and bottom overlap allowance: 3/16" (5 mm)
• Anti-tip block installation: Located near the rear of the top surface, 14 13/16" (376 mm) above the floor.
• Suggested electrical outlet location is indicated.
• Cabinet floor must support 100 lbs.

PRODUCT DIMENSIONS

Diagram Description: The diagram shows the overall dimensions of the microwave drawer.

• Overall Width: 29 15/16" (760 mm)
• Overall Depth: 21 5/8" (550 mm)
• Overall Height: 14 5/8" (371 mm)
• Drawer Front Height: 2 3/8" (60 mm)
• Drawer Handle Height from Top: 1 1/16" (40 mm)
• Drawer Depth When Open: 15" (381 mm)
• Mounting Flange Thickness: 1 7/16" (37 mm)

INSTALLATION INSTRUCTIONS

UNPACK MICROWAVE DRAWER

WARNING: EXCESSIVE WEIGHT HAZARD

• Use two or more people to move and install the microwave drawer. Failure to do so can result in back or other injury.

IMPORTANT: To avoid damage, do not grip or use the door or door handle while handling the microwave drawer.

• Remove all packing materials from inside the microwave drawer.
• Do NOT remove the waveguide cover located on the top of the microwave drawer.
• Remove the feature sticker if present.
• Check the drawer for any damage (e.g., misaligned or bent drawer, damaged seals, broken or loose guides, dents). If damaged, do not operate and contact your dealer or an authorized servicer.

MODEL AND SERIAL NUMBER LOCATION

The rating plate, containing the model and serial number, is located on the door frame behind the door of the microwave drawer. Open the drawer fully to access it.

INSTALL ANTI-TIP BLOCK

To reduce the risk of tipping, the anti-tip block must be provided and properly installed by the installer. The anti-tip block prevents serious injury that might result from spilled hot liquids.

Installation: The anti-tip block must be installed near the rear of the microwave drawer top surface, which is 14 13/16 inches above the floor on which the microwave drawer will sit.

Diagram Description: The diagram shows the anti-tip block positioned correctly, with dimensions of 6" and 3 1/2" indicated.

NOTE:

• If the Microwave Drawer is moved to a different location, the anti-tip block must also be moved and reinstalled.
• When installing to the wall, ensure screws completely penetrate the drywall and are secured in wood or metal for total stability.
• When fastening, be sure that screws do not penetrate electrical wiring or plumbing.

GROUNDING INSTRUCTIONS

WARNING: ELECTRIC SHOCK HAZARD ⚡

• Plug into a grounded 3-prong outlet.
• Do not remove the ground prong.
• Do not use an adapter or an extension cord.
• Failure to do so can result in death, fire, or electrical shock.

IMPORTANT:

• This appliance must be grounded. Grounding reduces the risk of electric shock by providing an escape wire for electric current in case of a short circuit.
• The microwave drawer is equipped with a cord having a grounding wire and plug. It must be plugged into a wall receptacle that is properly installed and grounded in accordance with the National Electrical Code and local codes and ordinances.
• Do not, under any circumstances, cut, deform, or remove any prongs from the power cord.
• If a standard two-prong wall receptacle is encountered, have it replaced with a properly grounded three-prong wall receptacle by a qualified electrician.
• If the power supply cord is too short, have a qualified electrician or service person install an outlet near the appliance.

Diagram Description: The diagram shows a suggested electrical outlet location with dimensions of 4" and 5" indicated.

INSTALL MICROWAVE DRAWER

The electrical requirements are a 120 Volt, 60 Hz, AC only, 15 A or 20 A supply. It is recommended that a separate circuit serving only this appliance be provided.

NOTE: If you have any questions about the grounding or electrical instructions, consult a qualified electrician or service person.

Steps:

1. Place the microwave drawer adjacent to the wall or cabinet opening. Plug the power supply cord into the electrical outlet.
2. Carefully guide the microwave drawer into the prepared opening. Avoid pinching the cord between the back of the microwave drawer and the wall.
3. Slide in the microwave drawer until the mounting flange is flush with the face of the cabinet.
4. Open the drawer. Using the 4 holes on the drawer frame as a template, pre-drill the cabinet using a 1/16" bit.
5. Secure the microwave drawer to the cabinet using the 4 screws supplied.

Diagram Description: The diagram shows the mounting flange and screw, and illustrates the 4 screws used for securing the drawer.

IMPORTANT

If you have a problem with this product, please contact COSMO Customer Support at +1 (888) 784-3108. Dated proof of purchase, model #, and serial # are required for warranty service.

Correct disposal of this product:

This marking ♻️ indicates that this appliance should not be disposed of with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.