Ecler VEO-XTI4D: JPEG2000 4K Over IP Video Transmitter with Dante
Technical Data Sheet
Product Overview
The VEO-XTI4D transmitter is a professional JPEG2000 over IP extender that enables secure HDMI® distribution with 18Gbps bandwidth, supporting 4K 60Hz 4:4:4 video over 1Gb Ethernet networks. It can reach distances up to 100 meters on a single Cat 6 or higher cable with a transmission latency of 1-2 frames. The unit is equipped with dual RJ-45 ports, supporting independent or combined network configurations for Dante AV-A. It features stereo audio insertion and extraction, along with digital audio outputs supporting ARC/eARC and SPDIF. Advanced video wall management up to a 9x9 configuration is supported when paired with the VEO-XCTRL4D controller. Additional control options include front panel controls, PoE capability, and a built-in WebGUI with TCP and RS-232 control commands for straightforward setup and management. It also includes relay and channel GPI/GPO control port, CEC, USB 2.0 KVM, and IR extension, making it a robust, scalable solution ideal for professional AV installations demanding leading-edge signal distribution and control.
Key Features
- Video over IP Unicast and Multicast distribution over 1Gb managed networks.
- Dante AV-A ready.
- Support for JPEG2000 video codec with 1-2 frame latency.
- Support for HDMI® 18Gbps 4K 60Hz 4:4:4 as specified in HDMI® 2.0b.
- Transmission distance up to 100 meters over Cat 6 or higher cable.
- Support for Dante and AES67 for two channel In/Out audio.
- Support for Main and Sub stream for video preview.
- Support for video wall compositing and management up to 9 x 9 setups.
- Support for HDR10, HDR10+, Dolby Vision.
- Support for audio formats LPCM 2.0/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby True HD, Dolby Atmos, DTS, DTS-96/24, DTS-EX DSD, DTS High Res, DTS-HD Master, DTS:X, Dante/AES67 (2/2 flows).
- Advanced EDID Management.
- HDCP 2.2 compliant.
- Dual RJ-45 network ports support joint or independent JPEG2000 and Dante distribution.
- Stereo unbalanced analogue and digital audio insertion and extraction via Euroblock and optical connectors.
- Includes HDMI® Loop Out.
- USB 2.0/KVM, CEC, RS-232, IR pass-through.
- Control options include front panel buttons, RS-232, Telnet, SSH control, and WebGUI.
- Support for PoE function.
Applications
- Retail
- Hospitality
- Education
- Corporate
- Leisure
- Sport & Wellness
Technical Specifications
Video Performances
| Video Input Connectors | 1 x HDMI® Type A Female, 2.0, 18Gbps |
| Video Output Connectors | 1 x HDMI® Type A Female, 2.0, 18Gbps |
| Video Input Resolutions | 480i, 480p, 720i, 720p, 1080i, 1080p up to 60Hz, 4K up to 60Hz |
| Video Output Resolutions | 1080p up to 60Hz, 4K up to 60Hz |
| Video Codec | JPEG2000 |
| Transmission Latency | 1-2 Frames |
| Chroma Subsampling | 4:4:4, 4:2:2, 4:2:0 |
| Colour Depth | 8-bit (4K 60Hz 4:4:4), 10-bit / 12-bit (4K 60Hz 4:2:2 – 4:2:0) |
| Colour Space | RGB, YCbCr, YUV |
| HDCP | 2.2 |
| HDR | HDR10, HDR10+, Dolby Vision |
| Video Composing Capabilities | Videowall up to 9x9 (via VEO-XCTRL4D) |
| Scaling Features | Up to 4K 60Hz |
| HDMI® Distance | Up to 4K/60Hz: 5m with IN/OUT HDMI® Cable; Up to 1080p/60Hz: 10m with IN/OUT HDMI® Cable |
Audio Performances
| Audio Input Connectors | 1 x 3-pin unbalanced Euroblock |
| Audio Output Connectors | 1 x 3-pin unbalanced Euroblock, 1 x Optical SPDIF |
| Audio Formats | LPCM 2.0/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby True HD, Dolby Atmos, DTS, DTS-96/24, DTS-EX DSD, DTS High Res, DTS-HD Master, DTS:X, Dante/AES67 (2/2 flows) |
| Sample Rate | 48KHz, 96KHz, 192KHz |
| Bit Depth | Up to 24-bit |
| Frequency Response | 20Hz-20KHz (±3dB) |
| ARC/eARC | Yes |
Device Control
| Control Connectors | 1 x RJ-45, 1 x 3-pin Euroblock, 1 x Jack 3,5mm |
| Control Protocols | Web, Telnet, RS-232, IR |
| Control Buttons | 1 x Reset button, 2 x Input selection |
| EDID Management | EDID Settings |
| Status Indicators | Power LED, Link LED, 3 digit display |
Pass-through Control
| Pass-through Connectors | 2 x USB Type A, 1 x USB Type B, 1 x 3-pin Euroblock, 2 x 4-pin Euroblock, 2 x 3.5mm Jack, 1 x HDMI® |
| Pass-through Protocols | USB 2.0, USB 1.1, RS-232, Relay IO, IR, CEC |
Network
| Network Connectors | 2 x RJ-45 |
| Network Requirements | Jumbo Frame, IGMP Management |
| Average Streaming Bitrate | 200-500Mbps (configurable via WebGUI) |
| Transmission Distance | 100m via Ethernet (Cat 6 / 6A/7) |
Electrical
| Power supply | PoE; External: Input 100-240 VAC @ 50/60Hz, Output: 12VDC-2.5A |
| AC mains connector | External PSU. Included 4 region power blades (UK,US,AU,EU) |
| DC mains connector | DC Locking |
Physical
| Power consumption | 9.12W |
| Operating temperature | Min: 0°C; 32°F; Max: 40°C; 104°F |
| Operating humidity | 20% - 90% RH, no condensing |
| Storage temperature | Min: -20°C ; -4°F; Max: 60°C; 140°F |
| Storage humidity | 20% - 90% RH, no condensing |
| Included accessories | 1 x IR Receiver cable (1.5 meters), 1 x IR Blaster cable (1.5 meters), 3 x 3-pin 3.5mm Euroblock connector, 2 x 4-pin 3.5mm Euroblock connector, 4 x Mounting ears, 8 x Mounting screw, 1 x PSU 12V/2.5A |
| Optional accessories | VEO-XCTRL4D |
| Dimensions (WxHxD) | 204 x 25.5 x 136 mm / 8.03 x 1.0 x 5.35 in. |
| Weight | 0.631 Kg / 1.391 lb |
| Shipping dimensions (WxHxD) | 280 x 80 x 180 mm / 11.02 x 3.15 x 7.09 in. |
| Shipping weight | 1.16 kg / 2.56 lb |
| Chassis material | Metal |
| Finished colour | Black |
Mechanical Diagram
The mechanical diagram illustrates the physical layout and dimensions of the Ecler VEO-XTI4D unit. It includes front panel views showing input/output connectors and controls, side views detailing dimensions, and a top view of the chassis. Specific dimensions are provided in millimeters, with corresponding inch measurements for key aspects like width, height, and depth.
Front Panel: Features include HDMI input and output, RJ-45 LAN ports, audio connectors (Euroblock and Optical SPDIF), RS-232, Relays, Digital IO, IR IN/OUT, USB ports (Device and Host), and status LEDs.
Rear Panel: Displays power input, LAN ports, audio outputs, and various control interfaces.
Side Panel: Shows the overall dimensions and mounting points.
Top Panel: Provides a view of the chassis with ventilation and branding.
Diagram Details:
- Overall dimensions: 204mm (Width) x 25.5mm (Height) x 136mm (Depth)
- Key internal components and their placement are indicated.
- Mounting ears and screw locations are shown for installation.
