User Manual for bouncepad models including: C6-B4-TA9-MN Counter 60 Tablet Security Enclosure, C6-B4-TA9-MN, Counter 60 Tablet Security Enclosure, 60 Tablet Security Enclosure, Tablet Security Enclosure, Security Enclosure
Bouncepad C6-B4-TA9-MN
Tablet & iPad Kiosk Stand | Bouncepad Original Counter 60
Counter 60 Assembly Instructions Tools Required: Socket Driver Sheet Code: BP-IM-038_REV3 Release Date: 18/10/2023 Copyright 2016 Spotspot Ltd. (T/A Bouncepad) all rights reserved. Confidential, no part of this publication may be reproduced or transmitted in any form without the written permission of the copyright holder. Tablet Set-up Kit Fixings Kit Faceplate Case Static60 Mounting Arm Freestanding Base Pair of Keys In the Box `Mounting Arm Box' includes: 1x T20 Pin Torx Driver Bit 4x M4 Split Washer 4x M4x20mm Buttonhead screw 1x Case Washer `Freestanding Base Box' includes: 4x M4x12mm Buttonhead screw 4x M4 Split Washer Fixings List * Due to the modular nature of our product range you may receive additional fixings in the fixings kit Tighten screw(s) using hand tools, using electric tools may damage your Bouncepad. M4 Split Washer M4x12mm Buttonhead screw T20 Pin Torx Driver Bit Locate & secure the Flex 1 Mounting Arm to the Freestanding Base. 4x Tablet Supports 1x Cable Clip 4x Corner Pieces Tighten screw(s) using hand tools, using electric tools may damage your Bouncepad. T20 Pin Torx Driver Bit M4x20mm Buttonhead screw M4 Split Washer Case Washer Attach the Bouncepad Case to its 2 Mounting Arm. Take care to ensure correct & full thread engagement. Unlock & remove the 3 Faceplate from the Bouncepad Case. 4 Install the Tablet Setup Kit. Each kit is specific per tablet device and Bouncepad Case. Key number here *We recommend recording the key number so you can purchase additional keys in the future. Feed the tablet cable 5 through the Bouncepad Case & mounting arm. 6 Place the tablet into the Case & connect to power. 7 Locate and lock the Faceplate onto the Bouncepad Case. 7 Installation is now complete.Adobe PDF Library 17.0 Adobe InDesign 19.0 (Windows)