Introduction
Thank you for purchasing the SILENT Brass™ Pickup Mute™. To enjoy the best performance and musical pleasure of the Pickup Mute, we recommend that you read this owner's manual carefully before you begin using it. Please keep this owner's manual in a safe place for future reference.
Important Precautions
Warnings
Do Not Disassemble: There are no user-serviceable parts inside the instrument. Do not disassemble this instrument or attempt to disassemble or modify any internal components in any way. If a malfunction occurs, stop using it immediately and have it inspected by a qualified Yamaha service technician.
Wetness Warning: Do not expose the instrument to rain or use it near water or in humid environments. Do not place any containers containing liquid (such as vases, water bottles, or glasses) on top of the instrument, as liquid may spill into any openings. If liquid (such as water) seeps into the instrument, immediately turn off the power, unplug the power cord from the AC power outlet, and have the instrument inspected by a qualified Yamaha service technician.
Cautions
Connecting Other Devices: Before connecting the instrument to other electronic components, turn off the power to all components. Before turning the power on or off for any component, turn all volume controls to their lowest setting. Always set the volume of all components to the lowest level, and then gradually increase the volume while playing the instrument to adjust it to your preferred listening level.
Placement: Do not place the instrument in an unstable location where it may accidentally fall over.
Handle with Care: Do not lean on the instrument or place heavy objects on it, and do not apply excessive force to buttons, switches, or connectors.
Yamaha is not responsible for damage, data loss, or corruption caused by improper use or unauthorized modification of the instrument.
Further Precautions
For your own safety and to prevent damage or malfunction of the equipment, please observe the following precautions carefully.
Securely attach the Pickup Mute inside the bell of the instrument.
Do not drop the Pickup Mute. Dropping it may cause damage to the device, or may damage your hearing due to the loud noise produced. Use with care.
Do not touch or poke the microphone assembly of the Pickup Mute. [Image description: A diagram showing a hand pointing at the microphone assembly on the mute, with a 'no' symbol ❌ over it.]
Precautions for Assembly (PM1X/PM2X)
When assembling, please refer to the owner's manual included with the PM1X or PM2X and follow the procedures provided in the manual.
Do not insert fingers or other body parts into the mute's openings, as this may cause injury.
Do not hit the mute against other objects.
Do not snag the mute's wiring or earphone cable on other objects.
To prevent the mute from falling off the bell of a bassoon or large bore tenor horn, be sure to use the included strap to secure the mute to the bell.
Avoid stepping on the wiring. ⚠️
After playing, remove the Pickup Mute from the instrument and wipe off any moisture from the Pickup Mute with a cloth. Do not wash with water. ❌
If there is any moisture remaining on the Pickup Mute after playing or at the end of a performance, wipe it thoroughly dry.
Specifications
Contents
- Pickup Mute (any of the following models): PM7X/PM6X/PM5X/PM3X/PM2X/PM1X
- Cable x 1
- Owner's Manual (this manual) x 1
* If the Pickup Mute is purchased separately, the Personal Studio™ STJ and stereo headphones are not included.
Pickup Mute Specifications
| Pickup Mute | PM7X (Trumpet, Cornet) | PM6X (Flugelhorn) | PM5X (Tenor Horn, Bass Horn) | PM3X (French Horn) | PM2X (Baritone Horn) | PM1X (Tuba) |
|---|---|---|---|---|---|---|
| Instrument | Small horn, Short horn | Flugelhorn | Tenor horn, Bass horn | French horn | Baritone horn | Tuba |
| Size (Diameter x Length) | 82 x 139 mm (3-1/4" x 5-1/2") | 129 x 143 mm (5-1/16" x 5-5/8") | 129 x 220 mm (5-1/16" x 8-11/16") | 129 x 216 mm (5-1/16" x 8-1/2") | 210 x 395 mm (8-1/4" x 15-9/16") | 335 x 695 mm (13-3/16" x 27-3/8") |
| Weight | 70 g (2.5 oz.) | 130 g (4.6 oz.) | 155 g (5.5 oz.) | 195 g (6.9 oz.) | 750 g (1 lbs. 10 oz.) | 1800 g (3 lbs. 15 oz.) |
Common Specifications for All Models
- Built-in Microphone: Electret Condenser Microphone
- Pickup Output Jack: Mini Phone Jack
- Rated Volume: -25 dB to -35 dB
* If the instrument's bell shape and size differ significantly from the mute, the mute may not fit properly.
* The bell cap (the pad that contacts the inside of the instrument's bell) is a consumable part. If this part wears out or is damaged, please contact your local Yamaha dealer.
* The detailed information in this manual is current as of the publication date. The latest version of this manual can be downloaded and viewed on the Yamaha website.
* SILENT Brass™, Personal Studio™, Pickup Mute™, Brass Resonance Modeling™, and the SILENT Brass™ logo are trademarks of Yamaha Corporation.
Setup and Use
Connecting Personal Studio STJ and Pickup Mute
⚠️ Before connecting the cable and installing the Pickup Mute, be sure to turn off the power and remove your headphones.
[Diagram description: Shows the Personal Studio STJ unit with inputs/outputs labeled MUTE IN, VOLUME, MIC, MAIN, PHONES. It also shows connections to PM6X (for Tenor Sax), PM5X (for Trombone, Bass Trombone), and PM7X (for Trumpet, Cornet). A cable connects the STJ to the mute. Stereo headphones are also shown connected to the STJ.]
- PM6X (for Tenor Sax)
- PM5X (for Trombone, Bass Trombone)
- PM7X (for Trumpet, Cornet)
Stereo Headphones (with microphone)
Cable (Accessory)
[Image of Yamaha logo with "PICKUP MUTE PM7X MADE IN CHINA CE"]
Connecting Mutes to Various Instruments
[Diagram description: Shows how to connect the Pickup Mute to various instruments. A close-up shows the mute's output jack and the connection cable. PM3X (for French Horn) is shown attaching to a French Horn. PM2X (for Baritone Horn) is shown attaching to a Baritone Horn. PM1X (for Tuba) is shown attaching to a Tuba. A note indicates to refer to the included manual for assembly information on PM1X or PM2X.]
- PM3X (for French Horn)
- PM2X (for Baritone Horn)
- PM1X (for Tuba)
* Refer to the included manual for information on assembling the PM1X or PM2X.
Using SILENT Brass
[Diagram description: Illustrates the signal path for using SILENT Brass. Stereo headphones (with microphone) allow you to listen to your playing and input your sound into the microphone. The Pickup Mute is included with the set. Signal Path: Pickup Mute -> MUTE IN / MIC / AUX IN (Audio Signal) -> Personal Studio STJ -> USB (included USB cable) -> Computer/Smart Device (Audio Signal). The Personal Studio STJ also has an AUX IN for connecting audio players. The diagram shows a person playing a trumpet with the mute attached, wearing headphones, connected to the Personal Studio STJ, which is then connected to a laptop.]
Do not disturb your neighbors by playing late at night. ?
⚠️ Caution: If you accidentally unplug a cable while the power is on, or if components are subjected to strong impact, loud noise may be produced, which could damage your hearing and the components. Use with care.
Installing the Pickup Mute
Hold the Pickup Mute with your right hand and insert it firmly into the instrument's bell, while supporting the instrument with your left hand.
Holding the French Horn
Use one of the following methods to hold both the Pickup Mute and the instrument simultaneously.
- Method 1: Hold the instrument with your right hand, place it on the edge of the Pickup Mute, with the base of your thumb on the Pickup Mute.
- Method 2: Lightly support the instrument with the base of your right thumb, placing it on the Pickup Mute, while your other fingers hold the outer edge of the bell.
[Diagram description: Shows the process of attaching the mute to an instrument bell. Another diagram shows two methods for holding a French Horn while attaching the mute.]
* Refer to the included manual for information on attaching the PM1X or PM2X.
* When holding the instrument, do not block the air vents of the Pickup Mute. ❌
* Do not pull forcefully on the cable. ⚠️
* Before removing any parts from the instrument, be sure to remove the Pickup Mute first. ✅
