LOGIK 16" Gun Metal Pedestal Fan

Safety Warnings

• Your fan should be used in such a way that it is protected from moisture, e.g. condensation, splashed water, etc. Do not place or store your fan where it can fall or be pulled into water or any other liquid.
• Stand the fan on a stable, level surface during use. Do not allow your fan to sit on top of the mains cable.
• Do not remove any fixed covers. Never use this appliance if it is not working properly, or if it has been dropped or damaged. Always contact a qualified technician to carry out repairs. If the mains cable is damaged it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
• If the fan is knocked over during use, turn off the unit and unplug it from the mains socket immediately.
• Do not operate your fan in the bathroom.
• Do not use hazardous chemicals to clean or come into contact with the fan. Never attempt to use the fan without the base parts assembled or in a horizontal position.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Children should be supervised to ensure that they do not play with the appliance.
• Never allow children to point their fingers into any power sockets or moving parts.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard.
• When the fan is assembled, the fan guard should not be taken off anymore.
• Do not operate this appliance with anything other than your hands. Do not use the appliance with wet hands.
• For fans that require assembling, to avoid personal injury, please ensure the product has been fully assembled according to the instructions within this manual.

Product Disposal

The symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product.

Company Information

DSG Retail Ltd. (co. no. 504877)
1 Portal Way, London, W3 6RS, UK

EU Representative:
DSG Retail Ireland Ltd (259460)
3rd Floor Office Suite, Omni Park SC
Santry, Dublin 9, Republic of Ireland

IB-L16PFGM17-201202V4

Introduction

Thank you for purchasing your new Fan. We recommend that you spend some time reading this instruction manual in order to fully understand all the operational features it offers. You will also find some hints and tips to help you resolve any issues. Read all the safety instructions carefully before use and keep this instruction manual for future reference.

Unpacking

Remove all items from the packaging. Retain the packaging. If you dispose of it please do so according to local regulations.

Included Items:

• Motor Unit with Screw, Lock Washer and Power Cord
• Stand with Joint Screw
• Front Guard with Screw and Nut
• Rear Guard
• Blade with Screw
• Inner Base
• Outer Base
• Instruction Manual

If items are missing or damaged, please contact Partmaster (UK only). Tel: 0344 800 3456 for assistance.

Diagram Description: The unpacking section shows an illustration of all the components laid out, including the motor unit, stand, guards, blade, bases, and manual.

Assembling the Fan

Follow these steps to assemble your fan:

1. Attach the Rear Guard to the Motor Unit using the provided screw.
2. Attach the Blade to the Motor Unit using the screw.
3. Attach the Front Guard to the Motor Unit, securing it with the screw and nut.
4. Assemble the base parts (Inner Base and Outer Base) and attach them to the Stand using the Joint Screw and Washer.
5. Connect the assembled base and stand to the Motor Unit.
6. Adjust the fan head angle by loosening the Adjusting Control, positioning the head, and tightening the control.
7. Adjust the fan height by loosening the Height Adjusting Control, extending the Stand to the desired height, and tightening the control.

Diagram Description: The assembly section provides a step-by-step visual guide showing how to connect the motor unit, blade, guards, and base to the stand. It illustrates the use of screws, nuts, washers, and joint screws. It also shows how to adjust the fan head angle and height using specific controls.

Product Overview & Operation

The fan speed is controlled by the Speed Dial. The settings are:

• 0: The Fan is switched Off
• 1: The Fan operates at the lowest speed
• 2: The Fan operates at the medium speed
• 3: The Fan operates at the highest speed

To make the fan head oscillate (move side to side), push the Oscillating Control down. To stop the oscillation, pull the Oscillating Control up.

The angle of the fan head can be adjusted up or down. To do this, loosen the Adjusting Control, set the fan to the desired angle, then tighten the Adjusting Control.

The height of the fan can be adjusted up or down. To do this, loosen the Height Adjusting Control, pull on the Stand to the desired height, then tighten the Height Adjusting Control.

Diagram Description: This section illustrates the fan's controls, highlighting the Speed Dial and the Oscillating Control. It also shows the Adjusting Control for the fan head angle and the Height Adjusting Control for the stand.

Cleaning

Unplug the unit from the mains socket before cleaning. Use a slightly damp cloth to wipe the outer body of the unit. Never immerse the unit in water or use chemicals or detergents, as they could damage the unit.

Hints and Tips

Specifications

Features and specifications are subject to change without prior notice.

Support and Further Information

For support, spares, and accessories, visit Partmaster.co.uk. They offer over 1 million spares and accessories with next-day delivery.

Partmaster Contact: 0344 800 3456 (UK customers only). Calls charged at National Rate.

For general support and advice, you can contact Currys.co.uk.

Currys Contact: 0344 561 1234

For EU support, contact DSG Retail Ireland Ltd.