Hama X-Pointer 6in1 Wireless Laser Presenter

Introduction

Thank you for choosing a Hama product. Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

1. Explanation of Warning Symbols and Notes

Warning ⚠️ This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note ℹ️ This symbol is used to indicate additional information or important notes.

2. Package Contents

• 'X-Pointer 6in1' laser presenter
• 2 AAA batteries
• Set with warning labels
• These operating instructions

3. Safety Notes

• The product is intended for private, non-commercial use only.
• Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
• Do not drop the product and do not expose it to any major shocks.
• Do not operate the product outside the power limits given in the specifications.
• Do not continue to operate the device if it becomes visibly damaged.
• Children are not permitted to play with the device.
• Dispose of packaging material immediately according to locally applicable regulations.
• Do not modify the product in any way. Doing so voids the warranty.

Warnings

Batteries ⚠️

• When inserting batteries, note the correct polarity (+ and - markings) and insert the batteries accordingly. Failure to do so could result in the batteries leaking or exploding.
• Only use batteries (or rechargeable batteries) that match the specified type.
• Always choose the battery size and grade that best suits the intended purpose. Keep these operating instructions in a safe place for future reference, as they provide information about choosing the right battery.
• Replace all the batteries in a set at the same time.
• Do not short-circuit batteries.
• Do not charge batteries.
• Do not throw batteries in a fire.
• Keep batteries out of the reach of children.
• Do not allow children to change batteries without supervision.
• Remove the batteries from products that are not being used for an extended period.
• Immediately remove and dispose of dead batteries from the product.
• Before you insert the batteries, clean the battery contacts and the polar contacts.

Laser ⚠️

• Do not look directly at the laser beam! Close your eyes and turn your head away if your eyes meet the laser beam.
• Do not shine light at persons using binoculars or telescopes!
• Do not look directly at the laser beam using optical instruments!
• This product contains a class 1 laser in accordance with EN60825-1:2014.

4. Operation

Inserting the battery (See Figure 1)

The diagram shows the bottom of the presenter with the battery compartment cover. It then shows the cover being opened upwards, revealing the battery compartment. Finally, it shows the batteries inserted correctly with polarity markings and the receiver removed from its storage slot.

• Use only AAA alkaline batteries.
• To insert or change the battery/batteries, insert the AAA battery/batteries with the correct polarity into the battery compartment.

Device Operation

The diagram shows the back of a computer with various ports. A close-up shows a USB receiver being plugged into a USB port. Another diagram shows a laptop with a USB receiver plugged in.

• Insert the USB receiver into an unused USB port on your PC (See Figure 2).
• Press the laser button ? to activate the built-in laser.

5. Controls (See Figure 3)

The diagram shows the top view of the laser presenter with buttons labeled. A legend lists the functions of each button: Laser Point activation, Air Mouse activation/Press to black display, Page Up, Page Down, Full screen playback, Digital Ink / Print function, Remove black track / mark track, Left (PC) mouse button, Right (PC) mouse button, ON/OFF (by long press), Volume +, Volume -.

6. 'Air mouse' mode

• Press the function button to start/exit the mode.
• Now control the mouse pointer by moving the presenter.
• In this mode, the L and R function buttons correspond to the commands of the left and right mouse buttons.

7. Care and Maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents. Make sure that water does not get into the product.

8. Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

9. Technical Data

10. Declaration of Conformity

CE Hereby, Hama GmbH & Co KG declares that the radio equipment type [00139916] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.hama.com -> 00139916 -> Downloads.