Kogan Portable Ceramic Heater

Safety & Warnings

• Read this guide fully before using your product and retain for future reference. Supply a copy of the manual if you pass the heater on to a new owner.
• Open the packaging, remove the heater and check that the body and supplied accessories are all complete and intact before using this product.
• This appliance has a built-in safety device which will prevent it from operating unless placed on a solid and level surface. Do not attempt to bypass this safety device.
• This heater is only suitable for indoor use. Do not use it outdoors!
• Do not use the heater near a bathtub, shower or swimming pool.
• Do not leave the heater unattended during use. Keep the heater out of reach of children.
• Do not cover the heater with anything during use. Maintain a safe distance between the heater and flammable or explosive items to avoid the risk of fire or explosions.
• Do not insert any objects into the shell or protective grid of the electric heater. Electrical leakage, shock or fire may be caused.
• Do not touch the metal housing of the heater during operation. Keep the heater out of the reach of small children to avoid the risk of burns. Allow ample time for the heater to cool down after use before putting it away in storage.
• If the heater will be unused for an extended period, unplug it from the power supply.
• Prior to using the heater, ensure it is in good condition and intact. If you find any faults or damage to the heater body, power cord or plug, cease use immediately and contact help.Kogan.com for support.
• Disconnect the power before moving or cleaning the heater. When disconnecting the power, first turn off the switch, then unplug the power plug. Do not pull on the power cord when unplugging the unit. Grasp the plug itself.
• Do not share the power socket with another electrical appliance to avoid current overload. Excessive current through a single power outlet can increase the risk of fire.
• CAUTION: This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.

Overview

The Kogan Portable Ceramic Heater is a compact and efficient heating solution. The unit features a cylindrical design with a textured exterior and a control panel on the top surface.

Key Components:

• 1. Control Panel: Located on the top, featuring display and buttons.
• 2. Indicators: Lights that show the current operating mode.
• 3. Air Outlet Grill: The front grille through which warm air is expelled.
• 4. Safety Switch (underside): A tip-over switch that automatically turns off the heater if it is not on a level surface.

Control Panel Details:

• 5. LED Display: Shows the current temperature setting (e.g., 26°C).
• 6. Temperature Up Button: Increases the desired temperature.
• 7. Temperature Down Button: Decreases the desired temperature.
• 8. Power Button: Turns the heater on and off.
• 9. Oscillate (turn) Button: Activates or deactivates the oscillation function, allowing the heater to turn approximately 70°.
• 10. Mode Button: Cycles through the available heating modes.

Operation

1. Plug the power cord into a standard 220-240V power outlet.
2. Place the appliance onto a solid, level surface. Ensure the safety switch on the underside is held down by the weight of the product.
3. Press the Power button to turn the heater on and off. The 3 indicator lights will show the current mode selected.
4. Press the Mode button to cycle between the three modes:
   • Fan only (indicated by three blue lights)
   • Warm (indicated by one red light)
   • Hot (indicated by three red lights)
5. Press the Oscillate (turn) button to activate the oscillation function, which turns the heater automatically with an angle range of approximately 70°.
6. Press the “+” or “-” buttons to adjust the temperature settings.

Cleaning & Care

• Ensure the appliance is switched OFF and completely cool before cleaning or attempting to store the item.
• Do not immerse the heater in water or allow water to drip into the interior of the heater, as this could create an electric shock hazard.

Storage

• When storing the heater, be sure to store it in a dry area.
• Wrap the power cord neatly. The power cord should not be in contact with any sharp edges, and it should not be compressed by heavy objects.
• Store the cord in a clean, dry location away from metal objects. Always check the plug before use to assure metal items haven't become attached.
• Do not place any heavy items on top of the heater during storage, as this may result in possible damage to the appliance.