Owner's Manual

Instructions for use

Thank you for purchasing this product. Please read this manual carefully before use to ensure that you can use the machine correctly. After reading the instructions, please keep it for future inspection.

Caveat

To prevent damage to the machine and to use the system safely, please:

• To prevent short circuits, do not omit metal objects (coins or other metal) inside the machine.
• Do not install the unit in a way that hinders the driver's sight or affects the driver's operation.
• When you drive, please do not pay attention. In the system, do not watch the screen for a long time.
• The machine consists of high-precision components; avoid strong impacts. Do not attempt unauthorized removal of the cover or adjustment of parts. For maintenance, please go to a nearby professional service center for consultation.

Before use

• When you purchase optional accessories or make related system settings, please check with the dealer whether they match the machine.
• You can select your favorite language display in the language setup menu. For more information, see Language Settings (page 4 of the manual).

Protect the display

• Protect the display from damage. Do not use a ballpoint pen or sharp tool to touch the display.
• When the machine panel or display screen is dirty, wipe with a soft cloth and a mild detergent.
• Do not use a hard cloth or alcohol and other corrosive thinners to wipe the display or panel, as this may cause display or panel damage, blurring, or screen disappearance.
• Please follow the instructions to use this machine. Damage caused by illegal operation is not covered by the warranty.

Note

The machine display screen you see may be inconsistent with the picture in the manual, which is due to unannounced software upgrades and updates. This does not affect normal use.

Some functions (DVD, color LED, TV, etc.) are optional. The device you purchase may not include all the functions that this manual lists.

Troubleshooting

Basic operation

Definition of the keys

Note: This table summarizes the definition of most of the panel buttons, but not every model contains all the keys. Some models contain only a small number of keys, which does not affect the use. If you have questions, please consult the dealer.

Open the system

Press the power button [1] for 1 second to activate the system.

Turn off the system

When the system is on, press and hold the power button [1] for 1 second to turn off the system.

Contents

Operation on the Home Screen

• home screen: 01, EQ Interface: 12
• source, network: 01, Curve Interface: 12
• Backstage: 01, FAB Interface: 12
• change the skin: 01, Delay Interface: 12
• move and delete icons: 02

Radio Operation

• Radio Basic Operation: 03
• RDS: 03
• Stores Channel: 03

Bluetooth Control

• Connecting: 04
• Hands-Free Call: 04
• Phone call: 04
• Phone book: 05
• Phone call record: 05
• Device connection: 05
• Bluetooth Setup: 06
• BT Music: 06

Rear Camera

• Note: The reverse cable (pink color) of the power cable must be connected to the car's parking or reversing wire. Then, when parking or reversing, the parking screen will automatically display.
• Red connects with the positive wire (B+) of the car's back light. Black connects with the negative wire (-) of the car's back light.
• Video in/reverse camera (Connected to the car DVD unit)
• Video signal cable
• Camera
• Reverse cable of power cable for VW (Connected with the video signal cable)
• Note: For Car Navigation for Volkswagen (VW) with CANBUS, the video signal cable (5 red color) must be connected to the Reverse cable of the power cables. For other models, it is not necessary to connect the video signal cable to the reverse cable.

Multimedia

• Music Player: 08
• Video Player: 08

Phone Link

• Phone Link (method 1): 09
• Phone Link (method 2): 11

Split screen

• Wiring Diagram: 19

Set up

• Video: 13
• General: 13
• Wi-Fi Setup: 13
• Bluetooth settings: 13
• Language Setup: 14
• Source Volume Level: 14
• Navigator: 14
• ColorLED: 14
• Car Logo: 15
• Steering Wheel Control Setup: 15
• Factory: 15
• Original Car: 15
• Android Settings: 16
• Upgrade & Reset: 16
• System Info: 16
• UI switching: 16

DSP Setting

• EQ interface, you can choose sound effects, such as Flat, Pop, Rock, etc.
• Curve interface, you can choose custom sound curve.
• FAB interface, You can set the sound balance.
• Delay interface, You can set the stereo and sound field delay.

Operating instruction for main interface

Main interface

1. Press the button [3] . The interface will return to the default main interface.
2. Slide to the left or right interface as you want.
3. Press the button [5] . It will display the interface of system applications and third-party applications.
4. Long press [4] . Go to the small window interface. Clear background running programs. Press the button [17] can replace the main interface wallpaper.

Move or Remove the icons

1. Change the icon position: press and hold the icon; it will pop up and become larger. This time the icon is movable, and you can place it wherever you want.
2. View APP information: press and hold the activated icon, drag the icon to [Info].
3. Delete icon: press and hold the activated icon, drag the icon to [X].

Add shortcuts for initial master interfaces 1 and 2

1. Press [3].
2. Press and hold the icon to wait for the pop-up panel of the main interface 1 and 2 to pop up.
3. Drag the icon to an empty position. If you drag it to other icons, it will form a folder.

Radio Operation

Radio Basic Operation

1. Select the FM1, FM2, FM3, AM1 or AM2 band.
2. Frequency display: switches to previous frequency manually. switches to next frequency manually.
3. Displays the preset channel list; hold the key (P1-P6) to store the current broadcast frequency.
4. Multi-function menu:
   Tunes in a station with good reception automatically.
   Short touch for non-stop seek tuning; touch again to cancel.
   Long touch for switching the preset channels; long touch again to cancel.
   Change between Locate and DX mode.
   Switch frequency band.
   Touch to activate the RDS function.
   EQ and FAB settings: please see the EQ and FAB setting below.
5. Mono and DX:
   DX: Displays LOC or DX.
   Mono: Displays Mono or Stereo, decided by the radio IC.

RDS

Stores Channel

1. Press the P1 key and hold to store the current channel to P1 key.
2. Press the P2 key and hold, then store the current channel to P2 key. If P3, then to P3 key, etc.

Bluetooth Control

Connecting

1. Activate the Bluetooth on your phone.
2. Touch search to search for the Bluetooth waiting for pairing.
3. Touch the Bluetooth Device name (e.g., 'jj' or 'ther') for connecting.
4. Type the pin code (default code is 0000 or 1234) on your phone.

Connecting a registered Bluetooth manually

1. Activate the Bluetooth on your phone.
2. Touch the to see the registered Bluetooth device list.
3. Tick the box of the Bluetooth device name to connect.
4. Type the pin code (default code is 0000 or 1234) on your phone.

Delete a registered device

1. Touch the to see the registered Bluetooth device list.
2. Cross the box of the device name.
3. Touch the cross, and it prompts, "Do you want to unpair the Device?"
4. Touch OK; the device is deleted.

Hands-Free Call

1) Phone call

Touch the , type the phone number, and click ; the phone call is successful as shown below.

Cancel the phone call by touching the , and touch the to switch to speaker.

2) Phone book

Touch the to enter the Bluetooth phone book interface, and follow the instructions to download the phone book.

3) Phone call record

4) Device connection

1. Primary

2. Bluetooth phone

3. Bluetooth Music

5) Bluetooth Setup

1. Touch the Bluetooth to change the Name.
2. Sync phonebook.

Playing Bluetooth Audio Device

Click into BT music and play music of the device connected by BT.

Rear Camera

Note: The Reverse cable (pink color) of the power cable must be connected to the car's parking or reversing wire. Then, when parking or reversing, the parking screen will automatically display.

Red connects with the positive wire (B+) of the car's back light. Black connects with the negative wire (-) of the car's back light.

Note: For Car Navigation for Volkswagen (VW) with CANBUS, the video signal cable (5 red color) must be connected to the Reverse cable of the power cables. For other models, it is not necessary to connect the video signal cable to the reverse cable.

Multimedia

Video Player

Music Player

Note: The Music Player and the Video player work when the USB or the SD card is connected. And there are music or video in the USB or SD card.

Phone Link (method 1)

1. Touch the to enter the PhoneLink interface. Touch the Instructions.
2. Turn on the Phonelink item on the head unit. Confirm the Phone's WIFI is open.
3. Connect your phone to the head unit's BT. After done, it will show a window on the BT page, asking if you want to use the Carplay function. Please click yes and wait for connection.
4. Turn off the head unit's hotspot; the wireless carplay will be disconnected.

Note: After the first connection, your phone needs to enter the BT device connection page, turn Carplay item on and off, then the connection will be finished.

Wire carplay function

Connect the iPhone to the head unit by cable (OTG port). Click "Use carplay" on your iPhone, then it will enter the Carplay page.

Wire Android Auto function

Connect the Android phone to the head unit by cable (OTG port), then it will enter the Android Auto page.

Phone Link (method 2)

1. Touch the to enter the PhoneLink interface. Touch the Instructions.
2. Turn on the Phonelink item on the head unit. Confirm the Phone's WIFI is open.
3. After the head unit is connected with BT, on the phone's home page, click the Setting item, then General, find the Carplay item and enter. In this page, find the head unit's name and connect it. Then a window will show on the phone; please click the "Use Carplay" item and wait for it to finish connecting.
4. Turn off the head unit's hotspot; the wireless carplay will be disconnected.

Note: After the first connection, your phone needs to enter the BT device connection page, turn Carplay item on and off, then the connection will be finished.

Wire carplay function

Connect the iPhone to the head unit by cable (OTG port). Click "Use carplay" on your iPhone, then it will enter the Carplay page.

Wire Android Auto function

Connect the Android phone to the head unit by cable (OTG port), then it will enter the Android Auto page.

DSP Setting

1. EQ interface: you can choose sound effects, such as Flat, Pop, Rock, etc.
2. Curve interface: you can choose custom sound curve.
3. FAB interface: You can set the sound balance.
4. Delay interface: You can set the stereo and sound field delay.

Set up

Video

• Touch [ Video ], if necessary.
• Parking - In Parking "Off" mode, the screen will display warning information if you play video. The warning screen will prevent the driver from watching videos while the vehicle is in motion.

General

• Select an option to access/setup.

Wi-Fi Setup

• Turn on the Wi-Fi and search for available networks.
• Select a hotspot to connect.

Bluetooth settings

• Manage Bluetooth devices.

Language Setup

Source Volume Level

• Set the Volume Level of each Source.

Navigator

• Select a Navigation source from the available list.

ColorLED

• Set the color of Keys on the front display.

Car Logo

Choose the LOGO you want.

Steering Wheel Control Setup

• Select [SWC] in the Settings menu to enter SWC setting menu.
• Select a function icon on the screen.
• Long press a steering wheel button.
• Repeat step 1 and 2 until all the settings are done.
• Touch [Save and Exit] after all buttons are set.
• To reset the programming, touch [Reset].

Factory

• Access Factory configuration. Default Password: 6666

Original Car

• View and manage CANBUS Settings. Default Password:0000

Android Settings

• View and manage the Android Settings.

Upgrade & Reset

• Upgrade the software & Reset the default settings.

System Info

• View System Informations.

UI switching

• Enter Settings, open General, and click UI.

Interface definition

A: 20Pin SIM card, audio and video socket

B: 12Pin 360 panoramic interface

C: 8Pin Plug-in protocol, audio output

D: 4Pin USB1 socket (Optional)

E: 6Pin USB2 socket

F: 10Pin Reversing, handbrake, WIFI/BT antenna socket

Split screen

1. Press the Setup icon [⚙️] >> select General >> select Navigation split screen. Open the button [▶️].
2. Press the Navigation icon [?️] >> Press the Split screen icon [?️].

Wiring Diagram

Diagram of power cable and RCA Cable

Note: only work within DC10.5V-16V power

FM 87.5~108.0MHz AM 522KHz~1620KHz

Speaker prohibit grounding!

[1] Power Cable Diagram

• Key1: Brown
• Reverse: Pink
• ACC: Red
• GND: Black
• BATT 12V: Yellow
• ILL: Orange
• Key2: Brown with Black
• ANT: Blue

Connection details

[2] RCA output socket

FCC Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.