User Manual for HDWR models including: HD10C Automatic Barcode Reader with Stand, HD10C, Automatic Barcode Reader with Stand, Barcode Reader with Stand, Reader with Stand, Stand
User Manual Automatic barcode reader with stand HD10C
User Manual
Automatic barcode reader with stand
HD10C
Table of contents
Specification................................................................................................................................................................... 3 The set contains:.......................................................................................................................................................... 4 Features: ............................................................................................................................................................................ 4 Factory reset................................................................................................................................................................... 5 Code Scanning Modes............................................................................................................................................ 5 Beep settings.................................................................................................................................................................. 5 Setting trailing characters.................................................................................................................................... 5 Case settings ................................................................................................................................................................. 6 Reading inverted codes (on a black background) ........................................................................... 6 Add a prefix and suffix ............................................................................................................................................. 6 Hide barcode characters.......................................................................................................................................7 Character Table ........................................................................................................................................................... 8
2
Specification
· Light source: 620nm LED · Sensor Type: CMOS · Scanning method: manual (on the button) / automatically
(after the code is brought closer) · Scan confirmation: light and sound signal · Scanning speed: 200 times/second · Interface: USB · Cord length: 140 cm · Protection level: IP54 · Device dimensions: 16 x 9.5 x 6.5 cm · Base dimensions: 24 x 12 x 12 cm · Package dimensions: 18.5 x 12 x 8.5 cm · Weight: 300 g · Package weight: 370 g · Operating temperature: -20 50°C · Storage temperature: -40 60°C · Read 1D codes: EAN-8, EAN-13, UPC-A, UPC-E, CODE 128,
CODE 39, CODE 93, CODE 11, CHINESE 2 of 5, CODABAR, MSI, Interleaved 2 of 5 (ITF), others one-dimensional
3
The set contains:
· Barcode Reader · Reader stand for self-assembly · Built-in USB communication cable · Manual
Features:
· Wired reader for scanning standard barcodes · Scan codes on LCD, LED/OLED and mobile device displays · Barcode scanning in automatic mode · Any character can be programmed before or after the
code
4
Factory reset
Restore default settings
Code Scanning Modes
Manual mode
Automatic mode
Beep settings
Sound On (default)
Sound off
Setting trailing characters
CR
Unmarked
TAB
LF+CR
5
Case settings
Uppercase and lowercase letters
No case conversion
Uppercase letters only
Lowercase only
Reading inverted codes (on a black background)
Enabled
Off (default)
Add a prefix and suffix
Add Prefix
Add a suffix
Cancel prefix
Anuluj suffix
6
Save settings To set a prefix or suffix, first scan the code "Add a prefix" or "Add a suffix", then scan the appropriate character from the table at the end of this manual, and finally read the code "Save settings".
Hide barcode characters
Hiding Initial Characters
Hide trailing characters
In order to hide individual characters in the barcode, first scan the code "Hide Leading Characters" or "Hide Trailing Characters" and then read the code at the end of this manual, corresponding to the number of digits to hide, with the scanner. For example, if you want to hide the first two characters of a barcode, you must first scan the code "Hide Initial Characters", then scan the code "0" and "2" from the table.
7
Character Table
SOH EOT BEL LF CR DLE DC3
STX ENQ Backspace VT SO DC1 DC4
ETX ACK TAB
FF SI DC2 NAK
8
SYN
ETB
EM
SUB
FS
GS
US
SPACE
"
#
%
&
(
)
+
,
CAN ESC RS
! $ '
* -
9
.
/
1
2
4
5
7
8
:
;
=
>
@
A
C
D
0 3 6 9 < ? B I
10
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
11
X
Y
[
\
_ ^
a
b
d
e
g
h
j
k
m
n
Z ] ' c f i l o
12
p
q
s
t
v
w
y
z
|
}
Delete
F1
F3
F4
R u x { ~ F2 F5
13
F6
F7
F9
F10
F12
INSERT
Page Up Page Down
Delete Right arrow
Bottom arrow
Top arrow
F8 F11 HOME
END Left arrow
14
Microsoft Word 2019