Solax Pocket WiFi V3.0 (-P/-E) User Manual

1. Installation

⚠️ Ensure all power has been turned off at least 5 minutes prior to installation.

Remove the cover of the DONGLE port at the bottom of the inverter. Prepare to install your Pocket WiFi.

[Diagram: Shows removing a cover from an inverter's DONGLE port.]

For the -P/-E version of Pocket WiFi, screw the antenna to the end of the shell.

-P: External antenna

-E: Extended antenna

*Antenna type is divided into external antenna and extended antenna. It is already selected when you purchase Pocket WiFi.

[Diagram: Shows the Pocket WiFi device and its antenna. For -P/-E, the antenna is screwed onto the shell.]

Plug the Pocket WiFi into the correct port of the inverter.

⚠️ Note that the side with the QR code should be on the top, and the direction of the button should be the same.

[Diagram: Shows the Pocket WiFi device being plugged into the inverter's DONGLE port.]

2. Monitoring

SolaxCloud Registration

Step 1: Use your smartphone to scan the QR code or search for "Solax Cloud" in a browser to download the Monitoring App.

Step 2: Touch the "Setting" button at the upper left corner of the Monitoring App to choose the language.

Step 3: Touch "Create a new account" at the bottom of the Monitoring App.

Step 4: Type in or scan the Registration No. and enter other information to complete the registration.

[Diagram: Shows smartphone screens illustrating the Solax Cloud app registration process, including language selection and account creation.]

Wi-Fi Connection

Step 1: Log in to your account and navigate to the "Account" page in the app.

Step 2: Click "Wi-Fi Connection".

Step 3: Type in or scan the Registration No. of the Pocket WiFi. Then touch "Next" and agree to join the network of the Pocket WiFi.

[Diagram: Shows a smartphone screen with a prompt to join a Wi-Fi network, displaying the network name and options to "Cancel" or "Join".]

Step 4: Type in your home Wi-Fi SSID and password.

*5GHz Wi-Fi is unavailable for now.

Step 5: Wi-Fi setting success.

*Check more Wi-Fi setting information on www.solaxcloud.com/wifiSetting/

[Diagram: Shows smartphone screens for Wi-Fi connection setup, including entering home Wi-Fi SSID and password.]

⚠️ WiFi connection requires Android 10 or higher system or iOS system.

Local Mode

Use your smartphone to connect to the SolaX Wi-Fi signal (e.g., "Wifi_SWxxxxxxxx"). Then touch "Local" and type in the password (initially the same as the Registration No.) to access the Local Mode in the Monitoring App.

*Visit the local password setting instruction on www.solaxcloud.com/wifiSetting/

[Diagram: Shows a smartphone screen with a login prompt for local access, requiring username and password.]

Monitoring Website

Step 1: Ensure that your computer or laptop is connected to a network.

Step 2: Open a browser and enter www.solaxcloud.com/

Step 3: Select your display language and read the User guide, then create a new account.

Step 4: Complete registration, login, add site, and other related operations according to the guidelines of the User guide.

Step 5: Click "Warranty Manage" and add your installation information to get warranty for your devices.

Technical Data

Appearance and Dimensions

Pocket WiFi V3.0: 95.5*45.7*28.5 mm

[Diagram: Illustrates the dimensions of the standard Pocket WiFi V3.0 unit.]

Pocket WiFi V3.0 -P/-E: 112*45.7*28.5 mm

[Diagram: Illustrates the dimensions of the Pocket WiFi V3.0 -P/-E unit, including the extended antenna mount.]

Warranty Regulation and Liability

Terms and Conditions

Solax grants a standard 24-month warranty. The terms of this warranty begin from the date marked on the purchase invoice. Solax will only perform warranty service when the faulty unit is returned to Solax along with a copy of the invoice and proof of purchase issued by the dealer. In addition, the type label of the unit must be fully legible. If these requirements are not fulfilled, Solax reserves the right to deny warranty service.

Exclusion of Liability

Warranty claims are excluded for direct or indirect damage due to:

• Use of unit in ways not intended, improper or substandard installation, improper operation and unauthorized modification to the units, or repair attempts.
• Missing warranty card and serial number.
• Operating the units with defective protective equipment.
• Influence of foreign objects and force majeure.
• Inadequate ventilation.
• Non-observance to relevant safety instructions.

Safety Instructions

• Prior to installation, ensure all power going to the inverter has been cut off.
• Keep away from flammable, explosive materials.
• Do not dismantle or scrap by force.
• Children should be supervised to ensure that they do not play with this appliance.

[WEEE symbol] Indicates that the product must not be processed with household waste. It must be brought to an electric and electronic waste collection point for recycling and disposal. By ensuring the appropriate disposal of this product, you also help in preventing potentially negative consequences for the environment and human health. The recycling of materials helps preserve our natural resources. For further information regarding the recycling of this product, please contact your municipality, local waste disposal center, or the store where the product was purchased.

Compliance Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF exposure warning: This equipment must be installed and operated in accordance with provided instructions, and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Proof of Purchase

Retain this page as proof of your purchase. See warranty registration notice for more details.

Name:

Phone Number:

Email:

Address:

Product Serial Number:

Country:

Zip Code:

Date of Commissioning:

Installation Company Name:

Date of Delivery:

Signature:

Manufacturer Information

SolaX Power Network Technology (Zhejiang) Co., Ltd.

Address: No.288 Shizhu Road, Tonglu Economic Zone, Tonglu City, Zhejiang Province, China.

Tel: +86 571 56260011

FAX: +86 571 56075753

EMAIL: service@solaxpower.com

WEB: www.solaxpower.com

Document Number: 614.00602.02