固德威——以光伏逆变器为核心的整体解决方案服务商
User Guide for GOODWE models including: LX A5.0-10 LX A5.0-30 Residential Smart Inverter Solutions, LX A5.0-10 LX A5.0-30, Residential Smart Inverter Solutions, Smart Inverter Solutions, Inverter Solutions, Solutions
ES Uniq 8.0-12kW Residential Smart Inverter Solutions Guide
8 août 2024 — When only one inverter is used in the system, it is supported to connect generator. • When multiple inverters are used in the system, it is not supported to ...
File Info : application/pdf, 9 Pages, 10.13MB
DocumentDocumentResidential Smart Inverter Solutions ES Uniq 8-12kW+Lynx Home A/Lead-acid battery Quick Guide V1.0-2024-07-30 01 Networking WARNING The information in this quick guide is subject to change due to product updates or other reasons. This guide cannot re- place the product labels or the safety precautions in the user manual unless otherwise specified. All descriptions in the manual are for guidance only. Device Model Inverter GW8000-ES-C10 GW10K-ES-C10 GW12K-ES-C10 Description · When only one inverter is used in the system, it is supported to connect generator. · When multiple inverters are used in the system, it is not supported to connect generator; a maximum of 16 inverters are supported to form a parallel system, and the Ezlink3000 is required in the parallel system. · The complexity of the parallel system increases with the increase of the number of inverters in parallel. When the number of inverters in parallel system is 6, please contact the after-sales service to confirm the installation and application environment of the inverters to ensure stable operation of the system. Requirements for parallel system: · The software version of all inverters in the system is the same. · The ARM software version of the inverter is 08 (415) and above. · The DSP software version of the inverter is 00(2525) and above. Device Model Description Battery system LX A5.0-10 LX A5.0-30 Battery of different models cannot be mix used. · LX A5.0-10: The nominal charging and discharging current of a single battery is 60A; a maximum of 15 batteries can be connected in parallel in one system. · LX A5.0-30: The nominal charging current of a single battery is 60A, and the discharging current is 100A; the maximum continuous charging current is 90A; the maximum continuous discharging current is 150A. A maximum of 30 batteries can be connected in parallel in one system. Lead-acid Battery · Supports connection to lead-acid batteries of AGM, GEL, and Flooded types. · The number of batteries that can be connected in series is calculated based on the voltage of lead-acid batteries, and the total voltage of batteries connected in series is not allowed to exceed 60V. Busbar BCB-11-WW-0 BCB-22-WW-0 BCB-32-WW-0 (Purchase from GoodWe) · When the charging and discharging current between battery and inverter is less than 160A, it supports direct connection between battery and inverter without using a busbar. For example: It supports connecting GW8000-ES-C10 to LX A5.030 without using a busbar. For detailed battery wiring methods, please refer to 6.6 Connecting the Battery Cable. · When the charging and discharging current between battery and inverter is 160A, a busbar or busbar box must be used to connect the inverter. (Current M x IBat rated. (M: The quantity of batteries connected in parallel in the system, IBat rated: The rated current of the battery). · BCB-11-WW-0: Used with LX A5.0-10, the battery system supports a maximum working current of 360A, working power of 18kW, and can connect to a maximum of 3 inverters, and 6 batteries. · BCB-22-WW-0: Used with LX A5.0-10, the battery system supports a maximum working current of 720A, working power of 36kW, and can connect to a maximum of 6 inverters, and 12 batteries. · BCB-32-WW-0: Used with LX A5.0-30, the battery system supports a maximum working current of 720A, working power of 36kW, and can connect to a maximum of 6 inverters, and 15 batteries. · Others: Please prepare busbar based on actual system power and current. Smart Meter · Built-in Smart Meter (Standard) · GMK110 (optional) · GM330 (purchase from GoodWe) · Built-in smart meter: 10-meter wire CT, default CT ratio: 120A/40mA · GMK110: When the length of the built-in CT cable of the inverter is not enough for connection to the switchboard, it can be extended through an external GMK110 smart meter. CT is not supported for changing to other type, CT ratio: 120A/40mA · CM330: order the CT for GM330 from GoodWe or other suppliers. CT ratio: nA/5A. · nA: CT primary input current, n ranges from 200 to 5000. · 5A: CT Secondary input current. Smart Dongle · WiFi/LAN Kit-20 (Standard) · Ezlink3000 (purchase from GoodWe) · Please use the WiFi/LAN Kit-20 module in single inverter system. · In parallel system, the EzLink3000 must be connected to the master inverter. Do not connect any smart dongle to slave inverter. Ezlink3000 requires a firmware version of 04 or above. 1 02 Power On/Off Single inverter system Multi-inverter system 2 03 Installations 3 04 Wiring Diagram ES Uniq 8-12kW (single) + Lynx Home A or Lead-acid battery + Builit-in smart meter + WiFi/LAN Kit-20 4 ES Uniq 8-12kW (single) + Lynx Home A or Lead-acid battery + GMK110 + WiFi-LAN Kit-20 5 ES Uniq 8-12kW (parallel connected) + Lynx Home A or Lead-acid battery + GM330 + Ezlink3000 6 Battery System Wiring Diagram 7 05 Equipment Commissioning SolarGo app SEMS Portal app In parallel scenarios, the software version of SolarGo app should be 5.4.0 or above. Follow the prompts to connect the device. Quick Settings Tap Home > Settings > Quick Settings to complete quick settings step by step. Installer password: goodwe2010 Setting the Safety Code Setting Inverter Quantity (Only For Parallel Connections) 1 2 Setting the Working Mode BACK-UP Mode Economic Mode Depth Of Discharge (On-Grid): The maximum depth of discharge of the battery when the system is working on-grid. Depth Of Discharge (Off-Grid): The maximum depth of discharge of the battery when the system is working off-grid. Smart Charging Mode Setting the BAT Connect Mode 8 Setting the Advanced Parameters Tap Home > Settings > Advanced Settings to set the following functions. Setting DRED/Remote Shutdown/RCR or Power Limit or Battery Functions. This function is disabled by default. To use the Remote Shutdown function, turn on this switch. Setting Power Limit Configuring the Network Tap Home > Settings > Communication Setting to set network parameters. WiFi/LAN Kit-20 Through battery function settings, you can set parameters for battery connected in the system. Setting GEN port Tap Home > Settings > Quick Settings to set parameters for generator or load. Creating a Power Plant Create power plants and add equipments via SEMS Portal app. Enter the plant information based on actual situation. Scan the QR code to add a new equipment. 2 1 9 Add a new equipment GoodWe Technologies Co., Ltd. No. 90 Zijin Rd., New District, Suzhou, 215011, China www.goodwe.com service@goodwe.com