HW702 ANT+ & BLE Heart Rate Armband
Version: V1.1
Material: 105g coated paper, single-color printing
1. Product Introduction
Thank you for purchasing our ANT+ & BLE heart rate armband. This product is one of the heart rate monitors from our company, which transmits real-time heart rate data through Bluetooth or ANT+ to a receiving device, sports, and health app, helping you to manage your exercise intensity scientifically. This user manual will help you use the product better; please keep it for reference. (This product is for sport purposes only and is not meant to replace any medical advice).
2. Product Accessories
- Heart rate monitor/armband
- Charging cable
- User manual booklet
3. Basic Parameters
- Product size: 46.78x34.58x11.58mm
- Host weight: 10.5g
- Power: Rechargeable lithium battery
- Battery life: 20 hours for continuous heart rate monitoring
- Water resistance: IP67
- Working temperature: 0°C~45°C
- Transmission: ANT+, BLE
4. Function and Operation
Turn-on
Press the start-up button. The LED light will flash blue quickly, indicating the heart rate searching. As the heart rate is detected, the light will flash slowly.
Illustration showing the start-up button and LED indicator on the armband.Turn-off
Press the start-up button when not in use. The LED light will flash red quickly, then enter the shutdown state.
POWER Status
- a. When you press the start-up button, if the LED light flashes red several times, it indicates that the battery is low and needs to be charged.
- b. The LED light will flash red and green alternately while charging. After a full charge, the LED will show green continuously.
Wearing Instructions
Wear the armband on the upper portion of the forearm. The sensor should be on the inside or top of the forearm. It should be worn snug enough not to move on your arm, but NOT so tight that it restricts arm circulation.
Illustration showing how to wear the heart rate armband on the upper forearm, with the sensor positioned on the inside or top of the forearm.Rear View and Charging
Diagram showing the rear view of the heart rate armband. It labels the HEART RATE SENSOR, CHARGING TERMINALS, and ARMBAND. It also shows the charging cable connected to the terminals. A note indicates '!!Remove Protective Sticker!!'.Initial Setup with Bluetooth Smart Fitness Apps
- Set Bluetooth on your device to ON.
- Find the Sensor Settings menu in the Bluetooth Smart Fitness App.
- Connect this device armband by turning it on.
Initial Setup with Bluetooth Smart Devices
(Applicable for Sports Watches, Fitness Equipment & GYM Team Training Systems.)
- From the device settings menu, select "Add HR sensor".
- Connect this device armband by turning it on.
Compatible Apps
- MooFit
- Wahoo Fitness
- Strava
- Runtastic
5. Disclaimer
The information contained in this manual is for reference only. The product described above may be subject to alteration owing to the manufacturer's continuing research and development plans, without prior announcement.
The manufacturer shall not bear any legal responsibility for any direct or indirect, accidental, or special damages, losses, and expenses arising from or in connection with this manual or the contained product.
