Owner's Manual for CERBERUS PYROTRONICS models including: Lever Actuated Control Head, Actuated Control Head, Control Head, Head
Cerberus Pyrotronics LAH Lever Activated Control Head 6018 - Fire Alarm Resources - Free fire alarm PDF manuals, documents, installation instructions, and technical specifications
File Info : application/pdf, 2 Pages, 983.02KB
DocumentDocumentLever Actuated Control Head ENGINEER AND ARCHITECT SPECIFICATIONS Model LAH Features: · Used for Manual Actuation of Cylinder · Comes Equipped with Safety Pull-Pin, to Prevent accidental Manual Discharge of FM-200TM Cylinder · Self-Venting · Solid Brass Construction · Stainless Steel Lever · Listed and FM Approved Introduction Installation Model LAH, the Lever Actuated Head is equipped with an operating lever, for manual actuation of Ceberus Pyrotronics FM-200TM cylinders. The LAH is secured in a closed position by a safety pull-pin. When the safety pull-pin is removed, the lever can be manually rotated to the open position. When the lever is in the open position, it allows for the activating of the cylinder or valve on which it is installed. The lever operated control head is self-venting to prevent accidental system discharge in the event of a slow buildup of pressure in a pilot line. Ensure that the control head is in the "SET" position, with the safety pull-pin and seal wire intact. Next, remove the protection cap from the cylinder or stop valve actuation port. Using a suitable wrench, assemble the control head to the cylinder valve. Finally, tighten the swivel nut securely. Ordering Information Model No. Description Part No. LAH Lever Actuated Control Head 500-870652 6018 CATALOG NUMBER firealarmresources.com Mounting Data Cerberus Pyrotronics 8 Ridgedale Avenue Cedar Knolls, NJ 07927 Tel: (201) 267-1300 FAX: (201) 397-7008 11/96 1M CPY-IG Printed in U.S.A. Cerberus Pyrotronics 50 East Pearce Street Richmond Hill, Ontario L4B, 1B7 CN Tel: (905) 764-8384 FAX: (905) 731-9182 firealarmresources.com November 1996 Supersedes sheet dated 10/95