Instruction Manual for V I V O models including: STAND-V001V Single Monitor Desk Stand, STAND-V001V, Single Monitor Desk Stand, Monitor Desk Stand, Desk Stand, Stand
Monitor Mounts Stands for every desk setup – Page 3 – VIVO - desk solutions, screen mounting, and more Assembly Instructions
Single Monitor Mounts – VIVO - desk solutions, screen mounting, and more
File Info : application/pdf, 4 Pages, 692.12KB
DocumentDocumentSingle Monitor Desk Stand Instruction Manual SKU: STAND-V001V Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v001v GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com Chat live with an agent! 309-278-5303 WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use. TIPOVER WARNING SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER: · NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND. · USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER. WARNING: CHOKING HAZARD SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED. PACKAGE CONTENTS A (x1) Column B (x1) Base C (x1) VESA Bracket D (x1) Cable Clip S-A (x2) M6x16mm Screw S-B (x2) M6x12mm Screw M-A (x4) M4x12mm SCrew M-B (x4) M4x16mm Screw M-C (x4) Spacer T-A (x1) T-B (x1) 4mm Allen Wrench 5mm Allen Wrench TOOLS NEEDED Phillips Screwdriver NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED DO NOT EXCEED WEIGHT CAPACITY. 17.6lbs Failure to do so may result in serious injury. (7.98kg) 2 ASSEMBLY STEPS STEP 1 Slide Cable Clip (D) onto Column (A). Assemble Column (A) to Base (B) using M6x16mm Screws (S-A) and 4mm Allen Wrench (T-A). D STEP 2 Secure VESA Bracket (C) to Column (A) using M6x12mm Screws (S-B) and 4mm Allen Wrench (T-A). S-B T-A A C STEP 3 Assemble the monitor to VESA Bracket (C) with Screws (M-A or M-B) and Spacers (M-C) if necessary. Tighten using a Phillips screwdriver. Adjust the tilt of VESA Bracket (C) using 5mm Allen Wrench (T-B). Manage cables and store Allen Wrenches (T-A, T-B) using the cable clip on Column (A). C M-A/M-B T-B T-A M-C T-B A 3 Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us LAST UPDATED: 06/30/2022 REV1.1 Open Monday - Friday 7:00am - 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product. 309-278-5303 AVG. RESOLUTION TIME (within office hrs): 5M 4S www.vivo-us.com Chat live with an agent! AVG. RESOLUTION TIME (within office hrs): < 15 M help@vivo-us.com AVG. RESPONSE TIME (within office hrs): 1HR 8M - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com