Swann NVW-600CMB Wi-Fi Battery-Powered Security Camera

Helpdesk & Resources

Visit the Swann Support Center at support.swann.com. You can register your product for dedicated customer support, download guides, find answers to commonly asked questions, and more.

• Product Registration
• Customer Support
• Product Manuals
• Frequently Asked Questions
• Support Community

Security Made Smarter

Model: NVW-600CMB

Camera Location Tips

1. Consider what you want to monitor and where you'll get the best view.
2. Plan how you'll connect the camera to your monitoring system, ensuring cables and connections are kept out of the weather.
3. Position the camera out of harm's way, ideally at an elevated location.
4. Place the camera as close to the area of interest as practicable, approximately 13ft/4m above, looking slightly down for detailed views.
5. Minimize sky in the camera's view, as bright daylight can darken the foreground image.
6. Focus on the most likely approach routes for potential intruders to maximize coverage.
7. The camera casing is resistant to weather and tampering, but prolonged exposure to adverse conditions like direct sunlight or excessive moisture may affect performance.
8. Run cables inside wall cavities or protected enclosures, ensuring all wiring and connectors are insulated and protected from moisture.
9. Avoid placing cables near live electrical wiring, as AC electricity can generate radio "noise" that interferes with the camera's signal.

Limited Warranty - Terms & Conditions

Swann Communications warrants this product against defects in workmanship and material for one (1) year from the original purchase date. Proof of purchase (receipt) is required for warranty validation. Defective units within the warranty period will be repaired or replaced at Swann's discretion, free of charge for parts or labor. The end user is responsible for all freight charges for sending the product to Swann's repair centers and for shipping costs to and from any country other than the country of origin.

The warranty does not cover incidental, accidental, or consequential damages arising from the use or inability to use the product. Costs associated with fitting, removal, or any other costs related to the product's use are the end user's responsibility. This warranty applies only to the original purchaser and is not transferable. Unauthorized modifications to any component will void all warranties. Local laws and regulations may supersede certain warranty exclusions.

For Australia: Products come with guarantees that cannot be excluded under the Australian Consumer Law. Customers are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. Products are also entitled to be repaired or replaced if they fail to be of acceptable quality.

1 Introduction

Congratulations on the purchase of your Swann Wi-Fi Battery-Powered Security Camera.

• 2K HD video transmitted wirelessly to NVR
• Battery-powered for ultimate convenience
• Controllable sensor spotlight & siren
• 2-way audio to welcome visitors or warn intruders
• True Detect™ heat & motion sensing for reliable alerts
• Powerful Night2Day™ color night vision

Important instructions

1. Ensure the camera is fixed correctly and stable.
2. Never place strain on the power connection or power adapter.
3. Do not operate if wires and terminals are exposed.

Important Note: All jurisdictions have specific laws and regulations regarding the use of cameras. It is the buyer's responsibility to be aware of and comply with all applicable laws and regulations that limit camera usage.

About this Manual: The content herein is for informational purposes only and subject to change without notice. While every effort is made to ensure accuracy at the time of printing, no liability is assumed for errors.

For instructions on configuring motion detection, changing image settings, and other functions, consult the manual for your NVR. Visit support.swann.com, search for your model, and download the relevant manual.

2 Charging the Battery

1. Charge the battery using the included USB cable. Follow the illustration for connection (power adapter not included). Charge for approximately 30 minutes, then disconnect.
2. Insert the battery into the camera; it will click into place. A beep sound will be heard shortly after.
3. Position the antenna vertically for optimal reception. Remove the protective plastic film from the camera's lens.
4. Follow the instructions in step 3 to pair the camera to your NVR.

Details:

• A. Remove the battery cover to access the USB-C connection.
• B. Charge the battery using a power adapter supplied with your mobile device.
• C. Remove the plastic film from the camera's lens.

3 Pairing the Camera

1. In Live View mode, select a channel to pair the camera to.
2. A pair button will appear (a blue pair button might also be visible in the top-right corner of the channel). Press this button to initiate pairing. An on-screen message will display.
3. Press and hold the pair button on the camera for 5 seconds, then release. The camera will begin pairing, and its IR LED will flash.
4. After a short period, the camera will be paired, and its image will appear on-screen. If pairing fails, repeat the instructions.

4 Mounting the Camera

1. Unscrew the mounting plate anti-clockwise from the mounting bracket.
2. Position the mounting plate where you intend to mount the camera. Secure it using appropriate screws for the mounting surface.
3. Screw the mounting bracket onto the rear of the camera. Do not overtighten the bolt, as you will need to adjust the viewing angle. Screw the mounting bracket onto the mounting plate.
4. Adjust the camera to the desired viewing angle, then tighten the bolt to secure it.

IC Statement

This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference; and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The term "IC: " before the certification/registration number signifies that Industry Canada's technical specifications were met. This product meets the applicable Industry Canada technical specifications.

Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS (RSS) d'Innovation, Sciences et Développement économique Canada. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

Cet équipement doit être installé et utilisé à une distance minimale de 20 centimètres entre le radiateur et votre corps.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.