Help Center
Instagram
Help - Mixware
User Manual for iCON models including: Upod.Live, 2 Mic-1-Instument in 2 Line Out Recording USB Interface
Аудиоинтерфейс iCON Upod Live, Профессиональное аудио, Аудиоинтерфейс купить в Тольятти 2022
File Info : application/pdf, 19 Pages, 15.99MB
DocumentDocument2 Mic/1-Instument in, 2 Line out recording USB Interface with DSP effect built-in for PC or Smart Phone User manual Important Safety Instructions 1. Read this manual thoroughly before using this unit. 2. Keep this manual for future reference. 3. Take notice of and comply with all warnings included in the user's manual or indicated on the appliance. 4. Follow all instructions included in this manual. 5. Do not expose this unit to rain or moisture. Avoid having water or other liquids spilled on this unit. 6. When cleaning the cabinet or other parts of this appliance, use only a dry or slightly damp soft cloth. 7. Do not block any ventilation openings or interfere with the proper ventilation of this unit. Install in accordance with the manufacturer's instructions. 8. Do not use or store near any heat sources such as radiators, heat registers, stoves, or other heatproducing appliances. 9. Do not interfere with the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. These are designated for your safety. If the provided plug does not fit into your outlet, consult an electrician. 10. Protect the power cord from being walked on or otherwise damaged by items placed on or against them. Particular attention should be given to the plugs, receptacles, and the point where the cord exits the appliance. 11. To avoid the risk of electrical shock, do not touch any exposed wiring while the unit is in operation. 12. Only use attachments/accessories specified by the manufacturer. 13. Unplug this unit and all connected electrical equipment during lightning storms or when left unused a long period of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the appliance has been damaged in any way or fails to operate normally. WARNING: To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture Contents Introductions .............................................................................................4 What's in the package? ............................................................................4 Register your ICON ProAudio product to your personal account ...........5 Features ...................................................................................................6 Front/Top Panel ........................................................................................7 Rear Panel.............................................................................................. 11 Controlling the DSP effects including FX/Vocal Tune/Pitch Shift/EQ with the two encoders.............................................................................12 Hardware Connections (with PC/Mac only)............................................14 Hardware Connections (Use as a standalone device) ...........................15 Minimum System Requirements.............................................................16 Specifications .........................................................................................17 Services..................................................................................................18 Introductions Thank you for purchasing the ICON ProAudio UpodLive digital audio Interface. We sincerely trust this product will provide years of satisfactory service, but if anything is not to your complete satisfaction, we will endeavor to make things right. In these pages, you'll find a detailed description of the features of the UpodLive digital audio interface, as well as a guided tour through its front and rear panels, step-by-step instructions for their setup and use, and full specifications. Please register the product on our website at the below link www. iconproaudio.com/registration: Please follow the step by step procedures. Start by inputing the device's serial number as well as your personal information, etc. By registering your product online, you will be entitled to service and after-sales support at our Help Center by visiting our website at www.iconproaudio.com. Also, all the registered products under your account will be listed on your personal product page where you will find updated information such as firmware/driver upgrades, software bundles, user manual downloads, etc. for your device. As with most electronic devices, we strongly recommend you retain the original packaging. In the unlikely event the product must be returned for servicing, the original packaging (or reasonable equivalent) is required. With proper care and adequate air circulation, your UpodLive digital audio interface will operate without any trouble for many years. We recommend that you record your serial number in the space provided below for future reference. What's in the package? UpodLive USB Recording Interface Quick Start Guide USB 2.0 cable 3.5mm TRS audio cable x 1pc 4 Register your ICON ProAudio product to your personal account 1. Check serial number of your device Please go to http:// iconproaudio.com/registration or scan the QR code below. Input your device's serial number and the other information on the screen. Click "Submit". A message will pop up showing your device information such as model name and it serial number - Click "Register this device to my account" or if you see any other message, please contact our after-sales service team 2. Log in to your personal account page for existing user or sign up for new user Existing user: Please log into your personal user page by inputing your user name and password. New user: Please click "Sign Up" and fill in all the information. 3. Download all useful materials All your registered devices under your account will show on the page. Each product will be listed along with all its available files such as drivers, firmware, user manual in different languages and bundled software etc. for download. Please make sure you have download the necessary files such as driver before you begin device installation. 5 Features The ICON UpodLive USB recording interface provides an audio input and output module with USB connectivity for your PC or Smart Phone. Main features include: Smart device digital (type C) and analog (TRRS) connection jacks are both equipped Compatible with iOS and Android Digital I/O jack (Type C) & Analog I/O jack (3.5mm stereo TRRS) is equipped for direct connection with Smart Phone Built-in ICON Hi-end DSP effects Large LCD display with two large control knobs for controlling DSP effects and main functions 16-Bit 48KHz 2 mic-In/1 instrument-In, 2-Out USB Recording Interface 2x2 analog I/O full duplex recording and playback ICON mic-preamp with individual gain control +48V phantom power equippedFunctions as a stand-alone device with RCA input & DSP processing. 2 analog outputs on 1/4" TRS jacks Build-in stereo 3.5mm stereo TRS line-in with individual gain control Functions as a stand-alone device with 3.5mm stereo TRS input jack & DSP processing Attenuator (Voice-Over) function button equipped for music fade-out automatically when mic signal is present Buttons equipped for controlling mic signal (dry/wet) recording to PC/Smart Phone Buttons equipped for controlling monitoring signal (dry/wet) Master volume control on the top panel 2 headphone outputs on 1/4" TRS jack and 3.5mm stereo with individual volume control USB2.0 compatible and USB bus-powered Switch for connecting Apple (iOS) or Android smart phone Plug & play and no driver installation is needed Compatible with Mac OS (Intel-Mac) and Windows XP, Vista (32-bit/64-bit), Windows 7 (32-bit/64-bit) & Windows 10 (64-bit) 6 Full duplex, simultaneous record/playback Front/Top Panel 9 10 6 14 3 4 11 11 12 18 17 13 15 16 2 1 8 5 7 1. "Mic"Inst 1/2 Unbalanced mic level inputs. These hybrid connectors will accept a standard 3-pin XLR plug or a 1/4" TS connector. Note: +48V phantom power will only be provided to XLR connector. 2. HI-Z input & gain control This is high impedance input for guitar/bass with individual gain control knob. 3. Mic/Instrument input switch Switch input from mic to Instrument or vice versa. 4. 48V phantom power switch Press to supply +48V phantom power to both XLR input. This phantom power circuit is suitable for most condenser microphones. 5. Input gain level controls 1/2 These potentiometers control the input level of the associated analog microphone (& instrument) inputs. 6. Master level control This potentiometer controls the master output level of the analog outputs. Note: Master level control will only adjust the output level of both the Line output 1/2 and the 3.5mm stereo output. 7. Headphone level control These potentiometers control the output level of the associated headphone output. 8. Headphone output These output jacks accept a standard 1/4 stereo TRS headphone and a 3.5mm stereo TRS connector. 7 9. Line in gain level control This potentiometer controls the input level of the Line-in inputs. 10. LCD backlit display The two-line backlit LCD display shows the parameter values as you adjust them and also provides feedback about channel selections, operating modes, and more. 11. FX/Vocal Tune/Pitch Shift/EQ control knobs These two encoders are provide to adjust the settings and parameters of FX, Vocal Tune, Pitch Shift and EQ 12. FX/Vocal Tune/Pitch Shift/EQ display LED These LEDs show the active control settings on the LCD. Press the left control knob to switch the active control manual from FX, Vocal Tune, Pitch Shifty or EQ. 13. Signal flow control buttons Recording/Live Streaming & Monitoring There are mainly two group of buttons (2x4) controlling the "Recording/Live Streaming" and "Monitoring" signal flow. Recording/Live Streaming button group consists of: Dry Only Mic/Inst input signal will be recorded or live streamed (no DSP processed). Wet Line In PC Out Mic/Inst input signal with DSP processed will be recorded or live streamed. Only Line in input signal will be recorded or live streamed (Note: If LiveRemote is being used, its signal will also blend with the Line in signal) PC or Smart Phone playback signal will be recorded or live streamed. Monitoring button group consists of: Dry Only monitoring the Mic/Inst. input signal. Wet Monitoring Mic/Inst. input signal with DSP processed. Line In Monitoring the Line in signal PC Out Monitoring the PC or Smart Phone playback 8 14. LiveRemote sensor An optional device "LiveRemote" is available for triggering sound sampler remotely when you doing live streaming. Please contact our dealer nearest you for product information. 15. Mode button Press to switch & activate between different channel signal flow presets including: P0 Custom Chan Allow you to self define your desired channel signal flow by activating the different buttons on "Recording/Live Streaming" and "Monitoring" button group P1 Chat Intended for internet chatting application P2 Music Intended for music listening application P3 Gaming Intended for internet gaming application P4 Host Intended for host live streamer P5 KTV Intended for internet karaoke application P6 Record Dry Intended for dry recording application Please refer to the below chart for the relation between the activated buttons at each preset mode Recording/Live Streaming Monitoring Mode Dry P0 Custom Chan P1 Chat Activated Wet Line-In PC Out Dry Wet User seif define as will Activated Line-In PC Out Activated P2 Music Activated Activated P3 Gaming Activated Activated P4 Host Activated Activated Activated Activated Activated P5 KTV P6 Record Dry Activated Activated Activated Activated Activated Activated Activated Activated Activated Activated Activated Activated Activated 9 16. Vocal Tune button Press to activate the "Vocal Tune" function. To adjust the settings, please refer to P12. 17. Pitch Shift button Press to activate the "Pitch Shift" function. To adjust the settings, please refer to P12. 18. Attenuator (Voice-Over) button Activating the attenuator (Voice-Over) function will allow the music signal from PC & RCA inputs to be ramped down when there is input signal from input 1 or 2. Signal will gradually ramp up again if there is no input signal. 10 Rear Panel 5 3 2 4 1 1. 3.5mm TRS input connectors These are unbalanced analog inputs on 3.5mm TRS connector at 10dB line level. 2. Line outputs 1/2 These are unbalanced analog outputs on standard 1/4 TS connectors at +6dBU line level. 3. USB 2.0 compatible Connector (Type-C) Connect it with the provided USB cable to your Mac/PC's USB connector. When you run the live streaming application, you have to connect it with an OTG cable that allows you to connect to both your PC and smart phone together 4. 3.5mm TRRS Smart Phone connection jack Connect this jack with the provided cable to your smart phone's headset input jack. 5. Power supply connector UpodLive is USB-bus powered. If your computer does not supply sufficient power, connect an ICON 5VDC power supply adapter to this jack. Or you may try to use your smart phone power adapter with the connect cable type (Android). Normally it should work and provide enough power to the device. (Note: You can get the power adapter from ICON distributors/dealers near you) (Note: External power adapter is needed if the UpodLive is using as a standalone unit) 11 Controlling the DSP effects including FX/ Vocal Tune/Pitch Shift/EQ with the two encoders There are four main different types of DSP effects including FX, Vocal Tune, Pitch Shift and EQ. Left control knob (Press) Press to switch between the four DSP setting manuals and there are four LEDs under the LCD showing the current active DSP manual. Left control knob (Rotate) Rotate the knob to select different DSP preset. Right control knob (Press) Press to switch between the parameters. Right control knob (Rotate) Rotate to adjust the value of the selected parameter. Below please find a table showing the four DSP with all its available presets, parameter settings etc. 12 13 Hardware Connections (with PC/Mac only) Connect the UpodLive digital audio interface outputs to your amplifier, powered monitors or surround system. Two-channel stereo operation, the default outputs are channels 1 and 2. If you are monitoring through headphones, connect your headphones to the device's headphone output. Connect your microphones to the device's analog input. Power Pack or MAC / PC or 14 Hardware Connections (Use as a standalone device) 15 Minimum System Requirements Important: The UpodLive digital audio interface is supported by Mac OS (IntelMac), Windows XP, Windows Vista, Windows 7 (32-bit/64-bit),and Windows 10 (32-bit/64-bit). The UpodLive digital audio interface is not supported by Windows 98 or Windows Me. For Windows XP, you must be running SP1 or later. Visit the Windows update web pages to make sure you have the most current updates and fixes supplied by Microsoft. On the Mac, the UpodLive digital audio interface is supported by Mac OSX version 10.11.6 (El Capitan) or later (must be Intel-Mac). Earlier versions of Mac operating systems are not supported. Windows OP: Pentium 4 -1.0GHz or higher 1.0Ghz RAM DirectX 8.1 or higher Windows XP (SP1), Windows 2000 (SP3), Windows Vista or Windows 7 or Windows 10 Mac OP: Intel-Mac 1.0GHz or higher 1.0GHz RAM OS 10.11.6 or later 16 Specifications Mic Input: Frequency Response ..................................... 22Hz to 20kHz (+/-0.2dB) Dynamic Range .............................................. 90dB, A-weighted Signal-to-Noise Ratio...................................... -90dB, A-weighted THD+N ........................................................... <0.0061% (-86dB) Crosstalk......................................................... -85dB @ 1kHz Input Impedance: Mic in ................................. 1.8K Ohms, typical Adjustable Gain .............................................. +39dB Inst Input: Frequency Response ..................................... 22Hz to 20kHz (+/-0.2dB) Dynamic Range .............................................. 90dB, A-weighted Signal-to-Noise Ratio ..................................... -90dB, A-weighted THD+N ........................................................... <0.0061% (-86dB) Crosstalk......................................................... -75dB @ 1kHz Input Impedance: Inst in ................................. 500K Ohms, typical; Total Gain Range:........................................... +38dB Line Inputs (RCA IN, Unbalanced): Frequency Response ..................................... 22Hz to 20kHz (+/-0.2dB) Dynamic Range .............................................. 90dB, A-weighted Signal-to-Noise Ratio...................................... -90dB, A-weighted THD+N ........................................................... <0.003% (-86dB) Crosstalk......................................................... -90dB @ 1kHz Input Impedance............................................. 10K Ohms, typical Adjustable Gain .............................................. +8dB Line Outputs 1/2 (Stereo, Unbalanced): Frequency Response ..................................... 22Hz to 20kHz (+/-0.2dB) Dynamic Range .............................................. 90dB, A-weighted Signal-to-Noise Ratio...................................... -90dB, A-weighted THD+N ........................................................... <0.003% (-86 dB) Crosstalk......................................................... -90dB @ 1kHz Nominal Output Level ..................................... Unbalanced: +2dBV, typical; Headphone Outputs: (at Maximum Volume; Into 100 Ohm load): Frequency Response ..................................... 22Hz to 20kHz (+/-0.2dB) Power into Ohms ............................................ 20 mW into 100 Ohms THD+N ........................................................... <0.06% (-66dB) Signal-to-Noise Ratio...................................... -90dB, A-weighted Max Output Level into 100 Ohms ................... +2.0dBV, typical Load Impedance............................................. 32 to 600 Ohms 17 Services If your UpodLive needs servicing, follow these instructions. Check our online help centre at http://support.iconproaudio.com/hc/en-us, for information, knowledge, and downloads such as: 1. FAQ 2. Download 3. Learn More 4. Forum Very often you will find solutions on these pages. If you don't find a solution, create a support ticket at our online ACS (Auto Customer Support) at the below link, and our technical support team will assist you as soon as we can. Navigate to http://support.iconproaudio.com/hc/en-us and then sign in to submit a ticket or click "Submit a ticket" without the need to sign in. As soon as you have submitted an enquiry ticket, our supporting team will assist you to resolve the problem with your ICON ProAudio device as soon as possible. To send defective products for service: 1. Ensure the problem is not related to operation error or external system devices. 2. Keep this owner's manual. We don't need it to repair the unit. 3. Pack the unit in its original packaging including end card and box. This is very important. If you have lost the packaging, please make sure you have packed the unit properly. ICON is not responsible for any damage that occurs due to non-factory packing. 4. Ship to the ICON Pro Audio tech support center or the local return authorization. See our service centres and distributor service points at the link below: If you are located in US If you are located in Hong Kong Send the product to: Send the product to: North America ASIA OFFICE: Mixware, LLC U.S. Distributor Unit F, 15/F., Fu Cheung Centre, 11070 Fleetwood Street Unit F. No. 5-7 Wong Chuk Yueng Street, Sun Valley, CA 91352; USA Fotan, Tel.: (818) 578 4030 Sha Tin, N.T., Hong Kong. Contact: www.mixware.net/help If you are located in Europe Send the product to: Sound Service GmbHEuropean HeadquarterMoriz-Seeler-Straße 3D-12489 Berlin Telephone: +49 (0)30 707 130-0 Fax: +49 (0)30 707 130-189 E-Mail: info@sound-service.eu 5. For additional update information please visit our website at: www.iconproaudio.com QQ iconproaudio Twitter iCON Instagram BiCONProAudio iCON-PRO Facebook 4006311312.114.qq.com Youtube www.twitter.com/iconproaudio www.instagram.com/iconproaudio www.facebook.com/iconproaudio www.youtube.com/iconproaudio Website Support Dashboard www.iconproaudio.com support.iconproaudio.com iconproaudio.com/dashboard/