MX2000 Pro LED Display Controller

Introduction

The MX2000 Pro is a large professional 8K LED display controller from Xi'an NovaStar Tech Co., Ltd. (NovaStar), part of the COEX control system series. It features 12-bit color depth, 480 Hz capability, real-time multi-screen scaling, 0-frame latency, and HDR support for precise brightness control and true-to-life color fidelity. Its card-based modular design allows for flexible input and output card configurations, making it stable and easy to maintain. With a compact 2U size, it supports up to 8x 4K@60Hz or 4x 8K@30Hz video inputs, with a maximum load capacity of 35.38 million pixels, ideal for large-screen configurations.

The MX2000 Pro supports up to 8 types of 8K/4K/VoIP input cards and offers seamless backup and automatic switching between devices, cards, and Ethernet ports. It promptly switches over in case of malfunction, issuing alerts to ensure stable output. It integrates with NovaStar's VMP (Vision Management Platform) software for enhanced operation and control.

Key advantages include a highly integrated design, premium image quality, powerful performance, tremendous load capacity, and easy control. It is widely used in rental services for large events, xR/VP studios, large fixed installation applications, TV production, e-sports events, exhibition halls, and other application scenarios.

Certifications: CE, FCC, IC, UL, CB, EAC, PSE, RCM

For products sold in specific countries or regions, please contact NovaStar to confirm relevant certifications. Otherwise, the customer assumes responsibility for legal risks, or NovaStar reserves the right to claim compensation.

Change History

Features

Inputs and Outputs

• 2x input card slots, supporting various input cards:
  • 4K input cards: 4x HDMI 2.0, 4x DP 1.2, 4x 12G-SDI
  • 8K input cards: 2x HDMI 2.1, 2x DP 1.4, 1x DP 1.4 + 1x HDMI 2.1
  • VoIP card (Video over IP): 1x ST 2110 (25G), 2x ST 2110 (25G)
• Authentic 12-bit video input (12bit/10bit/8bit supported)
• 2x output card slots: 1x40G fiber output card
• Works with CVT8-5G fiber converter for 5G transmission (up to 2,951,200 pixels per Ethernet cable).
• Works with CVT10 fiber converter for 1G transmission (up to 650,000 pixels per Ethernet cable).
• Supports real-time previewing and monitoring of video source input and LED screen status.
• Supports frame rates up to 480 Hz (dependent on screen hardware configuration).

Screen Management

• Card-based screen: Each screen can be customized with a different output resolution.
• Synchronized output splicing: Frame synchronization ensures smooth playback and perfect image without stutter, frame loss, tearing, or cut lines.

Advanced Features

• Multi-Layer: Single output card supports up to 4x layers; the device supports up to 8x 4K layers.
• Image Scaling: Each layer supports 4 scaling modes: custom, pixel to pixel, snap to canvas, and fill screen.
• Layer Roaming: Supports cross-card output of layers within the screen.
• Color Replacement: Allows replacing any color in an image without affecting other colors.
• 14Ch Color Correction: Precise adjustment of hue, saturation, and brightness for 12 standard colors, including RGB and black/white.
• Color Curves: Supports adjustment of RGBW curves.
• 3D LUT: Supports 3D LUT files (.cube) with accuracies of 17x17x17, 33x33x33, or 65x65x65 for video source color adjustment.
• Full-Grayscale Calibration: Works with NovaStar's calibration system and C3200 camera for unique calibration coefficients, ensuring grayscale uniformity and improved image quality.
• HDR: Supports HDR10 (complying with SMPTE ST 2084 and ST 2086) and HLG.
• 3D: Enables immersive 3D viewing experience with 3D emitters and glasses.

Device Controls

• LCD touch panel: Features a responsive, sturdy, and durable 5-inch touchscreen.
• VMP software control: Connects to VMP software for easy operation and management.
• Cascading control via Ethernet: Gigabit Ethernet ports support TCP/IP and star topology for cascading up to 20 units without a switch or router.
• Automated system monitoring and alarm: Monitors fan speed, temperatures, voltage, and operational status, reporting faults and alarms.
• Device backup: Supports hot backup between devices, output cards, and Ethernet ports.

Function Limitations

Supported Receiving Card Models

Appearance

Front Panel

• Running Indicator: Solid red (standby), Solid blue (powering on), Solid green (running normally), Flashing red (abnormal).
• Standby button: Press to power on/off; hold for 5-10s to restart.
• USB 2.0: For exporting device diagnostic results to a USB drive (NTFS and FAT32 supported).
• IPS Touchscreen: 5-inch screen for displaying status, configuring settings, and sending commands.
• Knob: Navigates menus, selects items, adjusts parameters, and confirms operations.
• BACK button: Returns to the previous menu or cancels the current operation. Knob + BACK simultaneously locks/unlocks buttons and screen.

Rear Panel

The rear panel features Input Card Slots (IN x), Output Card Slots (OUT x), a Control Card Slot (CTRL), an MVR Card Slot (Reserved), and a Power Supply.

Note on card slot markings:

• "IN x" slots are for input cards (e.g., IN 1 is the first input slot).
• "OUT x" slots are for output cards (e.g., OUT 2 is the second output slot).
• "MVR" slots are for MVR output cards (Reserved).
• "CTRL" slots are for control cards.

Input Cards

MX_4xHDMI 2.0 Input Card

MX_2xHDMI 2.1 Input Card

MX_4xDP 1.2 Input Card

MX_2xDP 1.4 Input Card

MX_4x12G-SDI Input Card

MX_1xDP 1.4+1xHDMI 2.1 Input Card

MX_1xST 2110 (25G) Input Card

MX_2xST 2110 (25G) Input Card

Output Cards

MX_4x10G_Fiber Output Card

MX_1x40G_Fiber Output Card

Control Card

Power

Applications

Solution Build

Users can build 1G/5G solutions using installed output cards (4x10G fiber/1x40G fiber) with different fiber converters and receiving cards. 1G/5G refers to the output bandwidth of a single Ethernet port.

Note: Different output cards can be used on the same controller, but cards of different models cannot load the same screen.

1G Solution (4x10G Fiber Output Card)

This diagram is an example of two input cards and one 4x10G fiber output card installed on an MX2000 Pro. The actual application may vary.

5G Solution (1x40G Fiber Output Card)

This diagram is an example of two input cards and one 1x40G fiber output card installed on an MX2000 Pro. The actual application may vary.

Dimensions

Diagram showing physical dimensions in millimeters with tolerance ±0.5 mm.

Specifications

Power consumption may vary based on product settings, usage, and environment.

Video Source Specifications

The following tables detail supported video source specifications for various inputs. Decimal frame rates are also supported, allowing automatic adaptation.

HDMI 2.0

HDMI 2.1

DP 1.2

DP 1.4

12G-SDI

Ethernet Port Load Capacity

1G Solution (4x10G Fiber Output Card)

When Working with A10s Pro Receiving Card

Formulas for load capacity per Ethernet port:

• 8bit: Load capacity × 24 × Frame rate < 1000 × 1000 × 1000 × 0.95
• 10bit: Load capacity × 32 × Frame rate < 1000 × 1000 × 1000 × 0.95
• 12bit: Load capacity × 48 × Frame rate < 1000 × 1000 × 1000 × 0.95

When Working with Other Armor Series Receiving Cards

Formulas for load capacity per Ethernet port:

• 8bit: Load capacity × 24 × Frame rate < 1000 × 1000 × 1000 × 0.95
• 10bit: Load capacity × 48 × Frame rate < 1000 × 1000 × 1000 × 0.95
• 12bit: Load capacity × 48 × Frame rate < 1000 × 1000 × 1000 × 0.95

5G Solution (1x40G Fiber Output Card)

When working with CA50E and XA50 Pro receiving cards, formulas for load capacity per Ethernet port:

• 8bit: Load capacity × 24 × Frame rate < 5G × 0.85
• 10bit: Load capacity × 32 × Frame rate < 5G × 0.85
• 12bit: Load capacity × 36 × Frame rate < 5G × 0.85

Notes and Cautions

Notes for Battery

• The battery is not intended to be replaced.
• Disposal of a battery into fire or a hot oven, or mechanical crushing/cutting can result in an explosion.
• Leaving a battery in extremely high temperatures can result in explosion or leakage of flammable liquid/gas.
• Subjecting a battery to extremely low air pressure may result in explosion or leakage of flammable liquid/gas.

Notes for Installation

• The product can be mounted in a standard 19-inch rack (capable of withstanding at least four times the equipment's weight) using four M5 screws.
• Elevated Operating Ambient: In closed or multi-unit rack assemblies, the operating ambient temperature may exceed room ambient. Ensure the environment is compatible with the specified maximum ambient temperature (Tma).
• Reduced Air Flow: Rack installation must not compromise required air flow for safe operation.
• Mechanical Loading: Mounting should prevent hazardous conditions due to uneven loading.
• Circuit Overloading: Consider supply circuit connections and potential effects of overloading on overcurrent protection and wiring. Adhere to equipment nameplate ratings.
• Reliable Earthing: Maintain reliable earthing for rack-mounted equipment, paying attention to supply connections other than direct branch circuit connections (e.g., power strips).

FCC Caution

Unauthorized changes may void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules, subject to two conditions: (1) no harmful interference, and (2) acceptance of any received interference. This equipment has been tested and complies with limits for Class A digital devices in commercial environments to provide reasonable protection against harmful interference. It generates, uses, and radiates radio frequency energy; improper installation or use may cause harmful interference to radio communications. Residential use may cause harmful interference, requiring user correction at their own expense.

Others

• The product must be placed horizontally; do not mount vertically or upside-down.
• This is a Class A product; it may cause radio interference in domestic environments, requiring user measures.