Running i18pro Bone Conduction Headphones User Manual

Product Overview

The Running Bone Conduction Headphone is designed for comfortable and secure wear, allowing users to remain aware of their surroundings. The design features ear hooks that wrap around the ear for a stable fit. Key components include:

• Ear Hooks: Provide a secure and comfortable fit.
• LED Light: Indicates charging and pairing status.
• Microphone: For calls and voice commands.
• USB Charge Port: For charging the device using a Type-C cable.

Button Functions

The headphone features two buttons, '+' and '-', for controlling various functions:

'+' Button Functions:

• Power On: Press and hold for 5 seconds in shutdown state. Red and green lights flash alternately, then green light stays on for 1 second. The headset automatically enters Bluetooth pairing mode (red and green lights flash alternately).
• Power Off: Press and hold for 5 seconds in the power-on state. The red light stays on for 1 second, then both red and green lights turn off.
• Next Song: Triple-click the '+' button.
• Volume Up: Double-click the '+' button.
• Answer Call: Short press the '+' button when the phone is ringing.
• Reject Call: Double-click the '+' button when the phone is ringing.
• Play Music: Short press the '+' button when connected.
• Pause Music: Short press the '+' button during music playback.

'-' Button Functions:

• Previous Song: Triple-click the '-' button.
• Volume Down: Double-click the '-' button.

Charging Instructions

Use the provided Type-C charging cable to charge the headphone. The red indicator light on the headset remains solid while charging. The green indicator light turns solid when the headphone is fully charged.

Technical Specifications

FCC Compliance Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.